Table of Contents
Advertisement
Available languages
Available languages
Assembling the blow pipe and
control handle
•
Connect the blower and control pipe with the flexible
hose. Clamp both ends of the flexible hose in place.
Use the accompanying hardware.
1
3
1
Flexible hose
2
Control pipe
3
Clamp
4
Clamp
NOTE!
Lubricate the pipes a little to facilitate assembly.
•
Fasten the handle holder to the control pipe and
tighten the knob on the holder. Please make sure to
align the handle holder with the convex of the control
pipe.
•
Adjust the position and angle to achieve a comfortable
working position, and tighten.
•
Use the clamp to fasten the cabling to the flexible
hose. (BTS)
•
Connect the straight pipe and pipe end. Push the
pipes together and turn them so they lock.
1154432-49 Rev. 1 2011-06-28
ASSEMBLY
2
4
Accessories
Handlebar
Disassemble the intermediate pipe. Disassemble the
knob from the holder and puch the holder on to the holder
pipe. Assemble the knob and tighten.
Assemble the intermediate pipe.
•
If higher air speed is required, the round blow pipe is
replaced by the flat nozzle.
–
English
15
Hide quick links:
Advertisement
Chapters
Table of Contents
