Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GE VG4061
Summary of Contents for GE VG4061
- Page 1 VG4061 VCR User’s Guide We bring good things to life.
-
Page 2: Important Information
IMPORTANT INFORMATION To reduce the risk of electric shock, do not WARNING remove cover (or back). No user serviceable RISK OF ELECTRIC SHOCK parts inside. Refer servicing to qualified DO NOT OPEN service personnel. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. -
Page 3: Table Of Contents
TABLE OF CONTENTS First Things First ... 3 Setting up the VCR ... 7 Using the Menu to Set Up Features ... 8 Language ... 8 VCR Channels List ... 8 To Auto Channel Search ... 9 To Change the Signal Type ... 10 To Add or Remove Channels ... - Page 4 Jacks and Cables ... 42 Choosing a VCR Connection ... 43 Advantages of Audio/Video Cable Connections ... 43 Don’t Forget About the Auto TV/VCR Feature ... 43 TV With RF Jack Only ... 44 TV With Audio/Video Jacks ... 45 TV With Audio/Video Jacks and Cable Box to Unscramble Pay Channels Only ...
-
Page 5: First Things First
Read the First Three Sections The first three sections of the manual introduce you to your VCR, and show you how to set the VCR up and use the on-screen menus. Reading these sections gives you the basic information you need to use your VCR. - Page 6 Step 3: Connect Your VCR If you connect your VCR to your home antenna or cable system and then to your TV, use the VCR’s ANT.IN and RF OUT jacks for a good signal as shown. If you have a TV with AUDIO/VIDEO jacks, use the audio/video jacks on the TV and VCR for a better connection.
- Page 7 3 or 4 or the TV’s video input. • If you connect your VCR using the ANT.IN and RF OUT jacks with RF coaxial cable, set the 3 CH. 4 switch to channel 3 or channel 4--the channel you want to use on your TV.
- Page 8 See Setting Up the VCR for detailed information about the Auto Play feature. Step 8: Set Up the VCR Once you understand how to move around and/or through the menus, go to the next section to set up your VCR.
-
Page 9: Setting Up The Vcr
SETTING UP THE VCR Set-Up Features Below is a list of set-up features that you may want to set up before you begin using your VCR for the first time: • Select a Language • Set up VCR Channel List (Auto Channel Search) •... -
Page 10: Using The Menu To Set Up Features
VCR Channels List If you use a cable box for all channels , this step is not necessary. Your VCR may come with a channel list preset at the factory. Even though your VCR may come with a list, it’s possible that you may want to add or eliminate some channels depending on whether they are active. -
Page 11: To Auto Channel Search
SETTING UP THE VCR To Auto Channel Search Auto channel search memorizes the channels available through your signal type--cable or antenna. 1. Press MENU to display the VCR MAIN MENU. VCR MAIN MENU 1 VCR Plus+ 2 Timer Recordings 3 Time... -
Page 12: To Change The Signal Type
Pressing CHANNEL up or down now selects the active channels. To Change the Signal Type 1. Press MENU to display the VCR MAIN MENU. 2. Press 4 to display the CHANNELS menu. 3. Press 3 to change the Signal Type between CABLE and ANTENNA. -
Page 13: Set Daylight-Saving Time
Select ON if you want the VCR’s clock to automatically adjust for daylight-saving time. • Select OFF if you do not want the VCR’s clock to adjust for daylight-saving time. Set the Time and Date 1. Press MENU to display the VCR MAIN MENU. -
Page 14: Vcr Plus+ Channels
Press MENU to set VCR Plus+ Channels Using VCR Plus+ can make programming timer recordings for cable or off-air antenna easier, but you have to put in a little time right now to set up a channel list. A worksheet and abbreviated codes for typical cable services in the U.S. -
Page 15: Vcr Plus Worksheet
Number** Name ESPN *Check your local or cable listing for the channel number you receive this station on. **Check your local listing for broadcast or VCR Plus+ channel number assigned. Channel Number Two-Digit VCR Plus+ Channel You Receive the Station On*... -
Page 16: Additional Set-Up Features In The Preferences Menu
2 Add/Remove Channels 3 Signal Type: CABLE 4 VCR Plus+ Channel List 0 Exit 3. Press 4 to display the VCR Plus+ Channel List screen. VCR+ Channel My Channel 3 -> -> -> Use CH+/- to select Press 0-9 to change Press MENU to save 4. -
Page 17: Remote Vcr1/Vcr2 Option
Now you are ready to select an item from the menu to set up. Remote VCR1/VCR2 Option If you own a compatible GE, RCA, or ProScan remote that has a VCR2, VCR2•LD, or VCR2 •DVD button, this feature allows you to set this VCR to respond to that button. -
Page 18: Auto Play
VCR is turned on or a cassette is inserted. This only applies if you connect the ANT.IN and RF OUT jacks of your VCR and TV and watch your VCR on channel 3 or 4 of your TV . -
Page 19: Vcr Basics
VCR BASICS Learn the Basics to Get You Started These VCR basics should be enough for you to begin enjoying your VCR. Learning the remote control functions, playing a recorded tape, and recording a program should do just that. However, there are other features that enhance the enjoyment of your VCR, but they aren’t necessary to... -
Page 20: Remote Buttons
VCR BASICS Remote Buttons The remote control is capable of controlling your VCR and many brands of televisions. If you have a GE, RCA, or ProScan TV, you may be able to control it without programming the remote. Component Buttons OFF Turns off VCR when remote is set to control the VCR. -
Page 21: Tv Function Buttons
1 until 1 – – appears on the screen. Then press the other two numbers. OFF Turns off the VCR when the remote is set to control the VCR. Turns off other components if remote is programmed. PAUSE Pauses playback or recording. Press PAUSE again to return to playback or recording. -
Page 22: Playing A Tape
Press TRACKING up or down to remove any streaks from the picture, if necessary. • Press STOP•EJECT (STOP) to stop playback. Tape Eject Press STOP•EJECT on the VCR when it is stopped to eject the tape. RECORD PLAY• PAUSE Pause... -
Page 23: Recording
Check the Safety Tab No matter which recording option you use, you need to make sure there is a tape in the VCR, and that the tape’s safety tab is in place. You cannot record on a tape with the safety tab removed. -
Page 25: Recording
RECORDING Several Recording Options Now that you’ve gone through the necessary steps to operate your VCR, I’ll explain the different recording features that are available to suit your needs. Recording features: Recording (explained in VCR Basics section) • • Express Recording •... -
Page 26: Recording Features
Press REC to set length Each press of the RECORD button increases the recording time (up to 4 hours). The VCR continues to record for the amount of time you indicate, and then automatically turns off. Ch 36 Record Length 1:30... -
Page 27: Timer Recording
The data includes the channel number (press INPUT to select the line input), start time including AM or PM, end time. The start date is automatically entered based on the VCR clock. Both the date and speed can be changed when flashing. -
Page 28: Vcr Plus+ Recording
TV and don’t receive all channels through a cable box or if you get your TV signal off-air. Setting Up the Channel List If you did not set up the VCR Plus+ channel list, you can do it now. 1. Display the CHANNELS menu from the VCR MAIN MENU. - Page 29 RECORDING 3. Enter the VCR PlusCode shown in your local television programming guide. VCR PLUS+ Enter pluscode number (from TV listing) 12876 Press CLEAR to correct Press MENU when done 4. Press MENU to enter the VCR PlusCode number. How often should this...
-
Page 30: Stopping A Timer Recording
(STOP•EJECT on the VCR) for a few seconds. Reviewing and Clearing Programs To review programs that you have already set up: 1. Press MENU to display the VCR MAIN MENU. 2. Press 2 to display the TIMER RECORDINGS menu. TIMER RECORDINGS 1 Create a New Program 2 Review Existing Progs. -
Page 31: Using Two Vcrs For Copying And Editing Tapes
Use one VCR as the playback VCR and the other as the recording VCR . 1. Turn on the TV and VCRs. 2. Tune the TV to the VCR viewing channel (either 3, 4, or TV’s video input). 3. If you connected your VCR using the ANT.IN and RF OUT jacks, tune recording VCR to channel 3 or 4—the one... -
Page 33: Programming The Remote
PROGRAMMING THE REMOTE Control Your Other Components... The remote can be programmed to control a television. It is programmed to control a GE, RCA, or ProScan TV. Other manufacturer’s brands need to be programmed. FIRST THINGS FIRST SETTING UP THE VCR... -
Page 34: To Control A Tv
The remote can be programmed to control other brands of remote controllable TVs. It is already programmed to operate most GE, RCA, and ProScan TVs. Programming the Remote to Control a TV If the TV does not turn on when you press the TV button, the remote needs to be programmed. - Page 35 Radio Shack ... 01,05,13 Envision ... 05,06 RCA ... 01,06,12 Fisher ... 05,08 Realistic ... 05 Sampo ... 06 GE ... 00,01,06,11 Goldstar ... 06,12 Samsung ... 06,09,12 Sanyo ... 05,08 Hallmark ... 06 Sears ... 01,05,06,07, Hitachi ... 06,14 Infinity ...
-
Page 37: Other Features
OTHER FEATURES Features to Enhance VCR Operation • Picture Search Options • Time Counter • On-Screen Displays • Tracking FIRST THINGS FIRST SETTING UP THE VCR VCR BASICS RECORDING PROGRAMMING THE REMOTE OTHER FEATURES CONNECTIONS... -
Page 38: Picture Search Options
2. Use TRACKING up or down to remove any streaks from the picture. 3. Press PLAY (PLAY•PAUSE) to return to normal playback. The VCR switches automatically from slow-motion playback to stop after a few minutes. Commercial Scan (Search Button) This is useful for skipping commercials or short program segments. -
Page 39: Frame Advance
During playback you can locate the program you want to play by the number of index marks or by scanning. The VCR will search forward or reverse from the location you are on the tape. To Search: 1. -
Page 40: Zero Search
OTHER FEATURES Zero Search The zero search feature enables the VCR to quickly return to a counter reading of 0:00:00 anywhere on the tape. This is especially convenient when you want to repeat a segment of the tape several times. -
Page 41: On-Screen Displays
Your VCR has automatic tracking which removes the streaks or snow from the picture. Automatic tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to manually adjust tracking, especially if the tape was recorded on a different VCR. -
Page 43: Connections
• Place an amplifier or satellite receiver on the top shelf of the stand so heated air rising from it will not flow around other components. FIRST THINGS FIRST SETTING UP THE VCR VCR BASICS RECORDING PROGRAMMING THE REMOTE OTHER FEATURES... -
Page 44: Connecting Your Vcr
RF Jack These jacks are required for antenna or cable-TV connections. The RF jacks on the VCR are labeled ANT.IN and RF OUT. The coaxial cable supplied with your VCR is used to connect the VCR’s RF OUT jack and your TV’s antenna input. -
Page 45: Choosing A Vcr Connection
The TV/VCR switch controls whether the picture signal is coming from the VCR or the TV. Set the Auto TV/VCR feature to ON when using only ANT.IN and RF OUT jacks and OFF when using the AUDIO and VIDEO OUT jacks--so your TV signal is not interrupted when the VCR is turned on. -
Page 46: Tv With Rf Jack Only
2. Return to First Things First , then follow the steps. Using This Connection Tune your TV to channel 3 or 4 whichever one you selected with the 3 CH. 4 switch on the back of the VCR. Use the TV•VCR button to watch the VCR. Auto TV/VCR setting: •... -
Page 47: Tv With Audio/Video Jacks
Using This Connection Tune your TV to its video input channel. Auto TV/VCR setting: • Set the Auto TV/VCR feature to OFF . Use of TV•VCR button is not required. To play a tape: 1. Insert a tape. 2. If necessary, press PLAY. -
Page 48: Tv With Audio/Video Jacks And Cable Box To Unscramble Pay Channels Only
Using This Connection Tune your TV to its video input channel. Auto TV/VCR setting: • Set the Auto TV/VCR feature to OFF . Use of the TV•VCR button is not required. To play a tape: 1. Insert a tape. 2. If necessary, press PLAY. -
Page 49: Appendix A: Reference
APPENDIX A: REFERENCE This section gives you some additional information about the VCR, including a description of the unit’s controls and display. You also will find a Troubleshooting Tips section in this Appendix, which might help to resolve some of those simple problems. -
Page 50: Front Panel
CHANNEL•TRACKING Up or Down Selects next higher or lower channel in the VCR’s channel memory. Adjusts tracking when a tape is playing. FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback. Starts slow-motion playback during play-pause. -
Page 51: Display Panel
Flashes when timer recording is set and there is no cassette in the VCR. VCR Indicator (Applies Only if your VCR Viewing Channel is 3 or 4) Press the TV•VCR button to turn on or off. • VCR indicator on: Picture from VCR. -
Page 52: Back Panel
VIDEO 3 CH. 4 Switch Selects the channel to which you will tune the TV to see the VCR picture if you connect the VCR using the ANT.IN and RF OUT jacks. AUDIO and VIDEO IN Jacks Receives signals from another component, like a VCR or camcorder, when it is connected to these jacks. -
Page 53: Troubleshooting Tips
• Press TV to set remote to control a compatible TV. • Check to make sure the remote is programmed to control a GE, RCA, or ProScan TV. Remote no longer controls a compatible TV • Press TV to set remote to control the compatible TV. - Page 54 Check to make sure the tape is not broken. • Check to make sure the VCR is not in pause mode. Press PAUSE or PLAY on the remote (PLAY•PAUSE on the VCR) to return to normal playback. Will not record •...
- Page 55 VCR makes noise when stopped • VCR is removing tape from heads. This is normal. The head cylinder inside the VCR will continue to rotate for a few minutes after you put the VCR in the stop mode. Will not Auto Channel Search active channels correctly •...
-
Page 56: Specifications
Cleaning the VCR Use a soft cloth or dusting attachment of your vacuum cleaner to dust your VCR. Remove dust from the ventilation holes on the top, back, sides, and bottom of the cabinet. Plastic surfaces are easily scratched and can be marred by alcohol and various solvents. -
Page 57: Limited Warranty
• Pay any Authorized GE VCR Servicenter the labor charges to repair your VCR. • Pay any Authorized GE VCR Servicenter for the new or, at our option, refurbished replacement parts required to repair your VCR. How you get service: •... -
Page 58: Index
Audio/video jacks 4, 5, 29, 42, 43, 50 Auto channel search 9 AUTO CHANNEL SEARCH menu 9 Auto DST ON/OFF feature 11 Auto play feature 16 Auto TV/VCR feature 16, 43, 44, 45, 46 Automatic rewind 21 Automatic tracking 20 Back panel controls 50 Basic recording 21... - Page 59 27 VCR, cleaning 54 VCR button 18 VCR channels list 8 VCR indicator 16, 49 VCR MAIN MENU 5, 8, 9, 10, 11, 12, 18, 25, 26 VCR Plus+ channel list 26 channel list screen 14 menu 26 PlusCode number 27...
- Page 60 If your VCR needs service, please contact your dealer or the nearest Servicenter from the yellow pages. Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product.