Advertisement
Quick Links
GE High-Efficiency Washer Quick Reference
Congratulations on the purchase of your new GE high-efficiency washer!
This HE washer has the new HydroWave™ system with Infusor™ wash technology. This system provides
excellent performance while using less water and energy than a conventional washer. You will notice some
differences during operation. Below is a list of quick tips to better understand your unit during normal
operation.
Topics
Water level seems low, Not
enough water
Small Load
Detergent
Fabric Softener
1. Lift Infusor™
Lid
"PreciseFill" Load Size
Option
Seems too quiet
Pauses
"Swoosh" or "zip" sound
Guide
Comments
This is normal
Large Load
Use High Efficiency detergent
Always use dispenser located on the
top of the Infusor™ when
using Fabric Softener.
2. Measure Fabric
Softener and Pour
Washer will not fill with water when
lid is open
This is normal
This is normal
This is normal
Reasons
During the wash cycle water may not entirely cover the top
of clothes. Infusor™ wash technology is at work and will
provide excellent cleaning.
The use of HE detergent will optimize wash performance
and prevent over sudsing.
Using the dispenser will ensure optimal distribution of
fabric softener and avoid spotting on garments.
3. Close Infusor™ Lid
Unit will not operate with lid open during "PreciseFill".
This is for your safety ‐ basket spins to aid in load sensing
– also allows option to perform properly.
HydroWave™ system is very quiet during portions of the
wash cycle. This action allows for optimal wash
performance.
At the beginning of the Cycle (with lid open or closed) the
smart drive system is sensing the load; as a result, there
will not be any noise.
The machine uses a (no gear) direct drive system. This is
the sound of the motor rotating back and forth to agitate
your laundry.
Super Load
4. Turn OPTIONS Knob on
control panel to FABRIC
SOFTENER setting
175D6444P001
Advertisement
