Mounting on a table
1
Lift and tilt the TV into its upright position on
a table.
-
Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Securing the Tv to a table
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
To secure the TV to a table, insert and tighten
the supplied screw on the rear of the stand.
(Only 42PN45**)
WARNING
y To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
ASSEMBLING AND PREPARING
Adjusting the angle of the Tv to suit view
(This feature is not available for all models.)
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
˚
20
CAUTION
y When adjusting the angle of the product,
watch out for your fingers.
-
Personal injury may occur if hands or
fingers are pinched. If the product is
tilted too much, it may fall, causing dam-
age or injury.
17
˚
20