Logout - D-Link DSL-2750E User Manual
Wireless n 300 adsl+ modem router
Hide thumbs
Also See for DSL-2750E:
- User manual (105 pages) ,
- Quick installation manual (33 pages) ,
- Technical support setup procedure (17 pages)
Table of Contents
Advertisement
DSL-2750E User Manual
This page displays event log data in the chronological manner. You can read the
event log from the local host or send it to a system log server. Available event
severity levels are as follows: Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or disable the system
log function.
To log the events, take the following steps.
Step 1
Select Enable Log check box.
Step 2
Select the display mode from the Mode drop-down list.
Step 3
Enter the Server IP Address and Server UDP Port if the Mode is set
to Both or Remote.
Step 4
Click Apply to apply the settings.
Step 5
Click View System Log to view the detail information of system log.
3.4.7
Logout
Choose MANAGEMENT > Logout. The page shown in the following figure
appears. In this page, you can log out of the configuration page.
93
Hide quick links:
Advertisement
Table of Contents
