D-Link AirPlus Xtreme G DWL-2100AP Manual page 12

802.11g wireless 108mbps access point

Hide thumbs Also See for AirPlus Xtreme G DWL-2100AP:

Table of Contents

Getting Started (continued)

Setting up a

Wireless

Infrastructure

Network

Please remember that D-Link AirPlus Xtreme G wireless devices are pre-

configured to connect together, right out of the box, with their default settings.

For a typical wireless setup at home (as shown above), please do the

following:

You will need broadband Internet access (a Cable or DSL-subscriber line into

your home or office).

Consult with your Cable or DSL provider for proper installation of the modem.

Connect the Cable or DSL modem to the DI-624 Router (see the printed Quick

Installation Guide included with your router.)

Connect the Ethernet Broadband Router to the DWL-2100AP (See the printed

Quick Installation Guide included with the DWL-2100AP.)

If you are connecting a desktop computer to your network, install the D-Link

AirPlus Xtreme G DWL-G520 wireless PCI adapter into an available PCI slot on

your desktop computer.

(See the printed Quick Installation Guide included with the network adapter.)

Install the drivers for the D-Link DWL-G650 wireless Cardbus adapter into a

laptop computer.

(See the printed Quick Installation Guide included with the DWL-G650.)

2 2 2 2 2

3 3 3 3 3

6 6 6 6 6

1 1 1 1 1

4 4 4 4 4

5 5 5 5 5

Table of Contents