Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
FS Commands
The windows of this section are used for formatting and changing the settings for the CompactFlash card located at the
back of the Switch. These commands relate to the CompactFlash card only and cannot be used for the Switch's internal
memory. Therefore, it will only be used with the DGS-3324SRi member of the xStack DGS/DXS-3300 Switch Series.
Format
The following window is used to format the CompactFlash card. To view this window, click Maintenance > CF Services
> FS Command > Format.
This window offers the following fields to aid the user in formatting the CompactFlash card.
Parameter
Description
Drive ID
Allows the user to specify the drive on the CF card to be formatted. For this release, only
c: drive can be set or specified.
FS Type
Allows the user to choose the type of File System to be formatted. For this release, only a
FAT16 file system can be used for formatting.
Option
Choose the type of formatting to be done.
No information will remain on the storage media accessory after a full format.
Label
Enter a previously set name associated with this storage media accessory.
Click Start to initiate the formatting of the CompactFlash drive.
Copy
This window is used to copy a directory located within the CompactFlash drive. To view this window, click Maintenance
> CF Services > FS Command > Copy. Click Start to initiate copying the file.
This window offers the following fields to aid the user in copying files located in the CompactFlash card.
Parameter
Source File (Full Path)
Target File (Full Path)
Figure 10- 19. Format CF Card Settings window
fast denotes formatting just the file architecture of the storage media accessory.
•
full denotes a full format.
•
full_with_MBR – Denotes that a full format will occur and all sectors of the card
•
will be cleared, including the Master Boot Record.
Figure 10- 20. Copy File window
Description
Enter the full path and file name of the directory to be copied. This entry cannot
exceed 64 characters in length.
Enter the file name of the directory and the path to place the copy. This entry cannot
exceed 64 characters in length.
300
Advertisement
Table of Contents
