HP 3115m Maintenance And Service Manual page 101

Notebook pc

Hide thumbs Also See for 3115m:

Table of Contents

Country/region

The United States

The flexible cord must be Type HO5VV-F, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance

coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region

where it will be used.

The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole

grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V ac) configuration. CSA or C-UL mark.

UL file number must be on each element.

The appliance coupler, flexible cord, and wall plug must bear a "T" mark and registration number in accordance with the

Japanese Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² or 1.25-mm² conductor size. The

wall plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) configuration.

The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler

and wall plug) must bear the CCC certification mark.

The flexible cord must be Type H05VV-F 3X0.75-mm² conductor size. KTL logo and individual approval number must

be on each element. Corset approval number and logo must be printed on a flag label.

The flexible cord must be Type HVCTF 3×1.25-mm² conductor size. Power cord set fittings (appliance coupler, cable,

and wall plug) must bear the BSMI certification mark.

For 127 V ac, the flexible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL

and CSA or C-UL marks. For 240 V ac, the flexible cord must be Type H05VV-F 3×0.75-/1.00-mm² conductor size, with

plug BS 1363/A with BSI or ASTA marks.

Accredited agency

Requirements for specific countries and regions

Applicable note number

Table of Contents

3125