Table of Contents
Advertisement
Startand stop
Start and stop
~WARNING!
Neverstartthe sawenginewithoutthe bar,chainandclutch
cover(chainbrake)assembled - or elsetheclutchcancomeloose
andcausepersonal i njuries.
Alwaysmovethe sawawayfromthefuelingareabefore
starting.
Placethe sawon cleargroundandmake
sure that the chain is
not contacting anything. Also, make sure that you have a secure
footing.
Keep people and animals well away from the working area.
I
Start
Grio the front handle with vour left hand and hold the saw down
I
by putting your right foot ii the rear handle.
Pull the starter handle with your right hand and pull out the starter
cord slowly until the starter pawls engage. Then pull sharply.
Push in the choke control immediately when the engine ignites
and make repeated starting attemps.
When the engine starts, rapidly give full throttle. Then the throttle
latch will disengage.
CAUTION! Do not release the starter handle from fully pulled out
position as this can cause damage on the saw.
—
Cold engine
CHAIN BRAKE: Disengagethe chain brake by pulling the hand
guard towards he front handle.
IGNITION:
Move the ignition switch to the left.
CHOKE:
Pull out the choke control
I FAST IDLE:
Combined choke/fast idle is received when the
I
choke is moved to choke position.
\.\
Iqs+armengine
\"/)/
Use the sam~ procedure as for starting cold engine but without
choke. Fast idle is recived by pulling out the choke fully first, and
8
pressing it back again.
stop
The engine is stopped by switching off the ignition.
(Move the ignition switch to the right.)
3
&
l/{
/g. —-
'u
,j
—.
—
-—
r=———
!',
~
,
\ ——
i.—
—,
\s\
Hide quick links:
Advertisement
Table of Contents
