Tips
When you set this item to [On] and touch
, the demonstration starts playing.
If you make one of the following operations, the
demonstration will be suspended. (It appears
again if no operation is performed for about 10
minutes.)
Pressing START/STOP or PHOTO
Touching the screen during the
demonstration
Pressing
(View Images)
Pressing MODE
Operating the power zoom lever (only when
you are using the projector).
Date & Time Setting
Date & Time Format
You can select one from 4 types of date and
time format.
Daylight Savings/Summer Time
You can change this setting without
stopping the clock. Set to [On] to move the
time forward 1 hour.
Off
Does not set the summertime.
On
Sets the summertime.
Date & Time
See page 18.
Area Setting
You can adjust a time difference without
stopping the clock. Select your local area
when using the camcorder in other time
zones. Refer to the world time difference
information on page 111.
HDR-CX360/PJ10/PJ30/PJ50/XR160
Home
Select this item when you are going to use
the camcorder in the area where you are
living.
Destination (
Select this item when you want to use
the camcorder with the area setting set to
another place.
Tips
If you visit a certain place often and want to
use the camcorder with the area setting set to
that place, it is useful if you set the place to
[Destination].
HDR-CX360V/PJ30V/PJ50V
You can set the area.
Tips
If [Auto Area ADJ] is set to [On], the area
setting (date and time) will be adjusted
automatically using GPS signals.
Auto Clock ADJ (Auto clock
adjustment) (HDR-CX360V/
PJ30V/PJ50V)
The camcorder can maintain accurate
time automatically by acquiring time
information from the GPS system.
On
Maintains accurate time automatically.
Off
Does not maintain accurate time using the
GPS system.
Notes
You must set the date and time on your
camcorder before using your camcorder (p. 18).
There may be discrepancies of a few seconds
even if [Auto Clock ADJ ] is activated.
US
97
)