Related Manuals for IBM 2809
Summary of Contents for IBM 2809
- Page 1 AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card Instruction V ersion 4 SENG-2809-04...
- Page 3 AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card Instruction V ersion 4 SENG-2809-04...
- Page 4 This edition applies only to reduced instructions set computer (RISC) systems. © Copyright International Business Machines Corporation 1998, 2000. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
-
Page 5: Safety And Environmental Notices
These circuits meet the standard limits described in International Electrical Commission (IEC) 664, installation category II. It is the customer’s responsibility to ensure that the power outlet meets the standards of IEC 664, installation category II. (RSFTC214) © Copyright IBM Corp. 1998, 2000... - Page 6 IBM at 1-800-426-4333. Please have the IBM part number that is listed on the battery available when you make your call. For information on battery disposal outside the United States, contact your local waste disposal facility.
-
Page 7: Installation Instructions
This feature is customer installed. It will take approximately 1 hour to install the hardware. However, you may elect not to perform this feature installation yourself. You may contact IBM or an Authorized Dealer to make arrangements for them to perform the feature installation for a fee. -
Page 8: Getting Ready
__ 6. Remove the system unit back cover by placing your hand near the bottom of the cover and lifting up and out, (Figure 1). Figure 1. Remove System Unit Back Cover AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5 authorized dealer or service provider. - Page 9 Installing the 2809 or 2824 LAN/WAN Workstation Card __ 1. The adapter card slots are E02 through E14 in the expansion unit, (Figure 2). Slot E01 is not an available position. Figure 2. Adapter Card Positions __ 2. Remove the left side cover by removing the screws and sliding the cover from front to back until it stops.
- Page 10 Remove the liner from the copper foil at the end, when you unroll the d. Attach the copper foil to an exposed, unpainted metal surface on the AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5 The 2209 Disposable Wrist Strap is for static control. It will not increase nor decrease your risk of receiving electric shock when using or working on electrical equipment.
- Page 11 Figure 4. Attach Wrist Strap __ 5. You will be installing the 2809 or 2824 card in card slot E07. __ 6. Before you install the adapter card, remove the adapter card slot cover inside the system unit by doing the following: a.
- Page 12 Slide the card into the system unit and push on both sides of the card c. Install the screw A that holds the adapter card in place, (Figure 6 on AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5 until the card is all the way into the slot and the connector.
- Page 13 Figure 6. Install Adapter Card __ 9. Do you have any other adapter cards or devices to install? ↓ If you know where to install the adapter card, follow the steps you just performed to install the card. If you do not know where to install the adapter card, go to the instructions that came with the adapter card.
-
Page 14: Completing The Installation
Plug the following power cords into an electrical outlet. v System unit v System unit console __ 3. Plug in and power on all attached devices, such as printers and displays. AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5... - Page 15 __ 4. Look at the Function/Data display on the control panel. Does a B N appear in the Function/Data display? ↓ Do the following: a. Press the Up or Down select push button until 02 appears in the Function/Data display. b.
- Page 16 __ 12. Your feature upgrade is complete. Keep all miscellaneous parts, such as wrap connectors, in a safe place. AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5 Verify that the card you moved is listed on the Packaging Hardware Resources menu.
- Page 17 Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead.
-
Page 18: Electronic Emission Notices
The drawings and specifications contained herein shall not be reproduced in whole or in part without the written permission of IBM. IBM has prepared this publication for use by customer personnel for operating and planning for the specific machines indicated. IBM makes no representations that it is suitable for any other purpose. - Page 19 Attention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Trademarks The following terms are trademarks of the IBM Corporation in the United States or other countries or both: AS/400 AS/400e series...
- Page 20 AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5...
-
Page 21: Readers' Comments - We'd Like To Hear From You
Please tell us how we can improve this book: Thank you for your responses. May we contact you? When you send comments to IBM, you grant IBM a nonexclusive right to use or distribute your comments in any way it believes appropriate without incurring any obligation to you. - Page 22 Readers’ Comments — We’d Like to Hear from You SENG-2809-04 Fold and Tape _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO.
- Page 24 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. SENG-2809-04...