This manual is intended only for trained service technicians who are familiar with ThinkPad products. Use this manual along with the advanced diagnostic tests to troubleshoot problems effectively. Before servicing a ThinkPad product, be sure to read all the information under Chapter 1 “Safety information” on page 1.
Page 8
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Chapter 1. Safety information This chapter presents following safety information that you need to be familiar with before you service a ThinkPad Notebook. • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 •...
• Reinstall all covers correctly before returning the machine to the customer. • Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges.
Page 12
• If an electrical accident occurs: – Use caution; do not become a victim yourself. – Switch off power. – Send another person to get medical aid. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-ThinkPad features or options not covered by this inspection guide. If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem.
– Use the round ground prong of the ac plug on ac-operated computers. Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Safety notices — multilingual translations The safety notices in this section are provided in the following languages: • English • Arabic • Brazilian Portuguese • French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese Chapter 1 Safety information...
Page 16
If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes. Seek medical care if any symptoms from the fluid are present after washing. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 17
DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. DANGER Though the main batteries have low voltage, a shorted or grounded battery can produce enough current to burn personnel or combustible materials. DANGER Unless hot swap is allowed for the FRU being replaced, do as follows before removing it: power off the computer, unplug all power cords from electrical outlets, remove the battery pack, and disconnect any...
Page 18
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 20
água durante pelo menos 15 minutos. Procure cuidados médicos se algum sintoma causado pelo fluido surgir após a lavagem. PERIGO Para evitar choque elétrico, não remova a capa plástica que protege a parte inferior da placa inversora. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 21
PERIGO Embora as principais baterias possuam baixa voltagem, uma bateria em curto-circuito ou aterrada pode produzir corrente o bastante para queimar materiais de pessoal ou inflamáveis. PERIGO A menos que uma hot swap seja permitida para a FRU que está sendo substituída, faça o seguinte antes de removê-la: desligue o computador, desconecte todos os cabos de energia das tomadas, remova o pacote de baterias e desconecte quaisquer cabos de interconexão.
Page 22
Si le panneau d'affichage à cristaux liquides se brise et que vous recevez dans les yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au moins quinze minutes. Consultez un médecin si des symptômes persistent après le lavage. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 23
DANGER Afin d'éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d'alimentation. DANGER Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la mise à la masse d'une batterie peut produire suffisamment de courant pour brûler des matériaux combustibles ou causer des brûlures corporelles graves.
Page 24
Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion führen. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 25
VORSICHT Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm besteht aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird oder der Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und die darin befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten die betroffenen Stellen mindestens 15 Minuten mit Wasser abgespült und bei Beschwerden anschließend ein Arzt aufgesucht werden.
Page 26
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 32
áreas afectadas con agua durante 15 minutos como mínimo. Obtenga atención medica si se presenta algún síntoma del fluido despues de lavarse. Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la tarjeta invertida. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 33
Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada o con contacto a tierra puede producir la corriente suficiente como para quemar material combustible o provocar quemaduras en el personal. Salvo que se permita el intercambio en caliente para la unidad sustituible localmente, realice lo siguiente antes de extraerla: apague el sistema, desconecte todos los cables de alimentación de las tomas de alimentación eléctrica, extraiga la batería y desconecte los cables de interconexión.
Page 34
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Chapter 2. Important service information This chapter presents following important service information that applies to all machine types supported by this manual: • “Strategy for replacing FRUs” on page 29 – “Strategy for replacing a hard disk drive” on page 30 –...
• The PEW record is the 4-digit MT and 3-digit model, where model = “CTO” (Example: 1829-CTO). • eSupport will show both the CTO and CMV machine type models (Example: 1829-CTO and 1829-W15 will be found on the eSupport site.) ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
• The HMM will have the 4-digit MT and 3-digit CTO model only (Example: 1829-CTO). Again, CMVs are custom models and are not found in the HMM. General Announce Variant (GAV) This is a standard model (fixed configuration). GAVs are announced and offered to all customers. The MTM portion of the machine label is a 4-digit MT and 3-digit model, where model = a “fixed part number”, not “CTO”...
Page 40
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
– “Checking the backup battery” on page 40 ® The descriptions in this chapter apply to any ThinkPad model that supports the PC-Doctor for DOS diagnostics program. Some descriptions might not apply to your particular computer. Before you go to the checkout guide, be sure to read the following important notes.
Checkout guide Use the following procedures as a guide in identifying and correcting problems with the ThinkPad Notebook. Note: The diagnostic tests are intended to test only ThinkPad products. The use of non-ThinkPad products, prototype cards, or modified options can lead to false indications of errors and invalid system responses.
2. When the ThinkPad logo comes up, immediately press F1 to enter the BIOS Setup Utility. Note: If a supervisor password has been set by the customer, BIOS Setup Utility menu appears after the password is entered. You can start the utility by pressing Enter instead of entering the supervisor password;...
Page 44
• In the Keyboard test in Interactive Tests, the Fn key should be held down for at least 2 seconds; otherwise, it cannot be sensed. • Video Adapter test supports only the LCD display on the ThinkPad Notebook. If you have an external monitor attached to your computer, detach it before running PC-Doctor for DOS.
Detecting system information with PC-Doctor PC-Doctor can detect the following system information: Hardware Info • System Configuration • Memory Contents • Physical Disk Drives • Logical Disk Drives • VGA Information • IDE Drive Info • PCI Information • PNPISA Info •...
Applicable test System board 1. Diagnostics ➙ CPU/Coprocessor 2. Diagnostics ➙ Systemboard Power Diagnostics ➙ ThinkPad Devices ➙ AC Adapter ➙ Battery 1 (Battery2) LCD unit 1. Diagnostics ➙ Video Adapter 2. Interactive Tests ➙ Video Audio Enter the BIOS Setup Utility and change Serial ATA (SATA) setting to Compatibility, and run Diagnostics ➙...
Power system checkout To verify a symptom, do the following: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the ac adapter. 4. Check that power is supplied when you turn on the computer. 5. Turn off the computer. 6.
2. Turn the computer upside down. 3. Remove the battery pack (see “1010 Battery pack” on page 65). 4. Remove the backup battery (see “1120 System board, fan assembly, and backup battery” on page 83). ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 49
5. Measure the voltage of the backup battery. See the following figure. Red (+) Wire Voltage (V dc) +2.5 to +3.2 Black (-) Black Ground • If the voltage is correct, replace the system board. • If the voltage is not correct, replace the backup battery. •...
Page 50
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Chapter 4. Related service information This chapter presents following information: • “Restoring the factory contents by using Recovery Disc Set” on page 43 • “Passwords” on page 44 • “Power management” on page 46 • “Symptom-to-FRU index” on page 47 Service Web site: When the latest maintenance diskette and the system program service diskette become available, they will be posted on http://www.lenovo.com/spm...
Note: After restoring a drive to the factory default settings, you might need to reinstall some device drivers. Passwords As many as three passwords may be needed for any ThinkPad Notebook: the power-on password (POP), the hard-disk password (HDP), and the supervisor password (SVP).
(B) If an SVP has been set and is known by the service technician: 1. Turn on the computer. 2. When the ThinkPad logo comes up, immediately press F1 to enter BIOS Setup Utility. For models supporting the Passphrase function, press F1 while the POP icon is appearing on the screen; then enter the POP.
1. Turn on the computer. 2. When the ThinkPad logo comes up, immediately press F1 to enter BIOS Setup Utility. For models supporting the Passphrase function, press F1 while HDP icon is appearing on the screen; then enter the master HDP.
Note: Even if you do not set the low-battery alarm, the charge indicator notifies you when the battery is low, and then the computer enters the power-saving mode automatically. To cause the computer to return from sleep (standby) mode and resume operation, do one of the following: •...
If no numeric code is displayed, check the narrative descriptions of symptoms. If the symptom is not described there, go to “Intermittent problems” on page 51. Note: For a device not supported by diagnostic codes in the ThinkPad Notebooks, see the manual for that device. Numeric error codes Table 2. Numeric error codes...
Page 57
Table 2. Numeric error codes (continued) FRU or action, in sequence Symptom or error (beeps, if any) 0250 1. Charge the backup battery for more than 8 hours System battery error—System battery is dead. by connecting the ac adapter. (two short beeps) 2.
The power-on password prompt appears. A power-on password or a supervisor password is set. Type the password and press Enter. The hard-disk password prompt appears. A hard-disk password is set. Type the password and press Enter. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Notes: • This policy applies to all ThinkPad Notebooks purchased on 1 January, 2008 or later. • Lenovo will not provide replacement if the LCD is within specification as we cannot guarantee that any replacement LCD will have zero pixel defects.
Page 60
6. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU. 7. If the problem remains, replace the following FRUs one at a time (do not replace a nondefective FRU): a. System board b. LCD assembly ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Indicator Meaning Sleep (standby) The illumination dot in the ThinkPad logo on the outer lid of the computer and on the status palm rest works as a system-status indicator: it shows whether the computer is in sleep (standby), hibernation, or normal model.
Page 62
Caps Lock mode is enabled. You can enter all alphabetic characters (A-Z) in uppercase without pressing the Shift key. Wireless status Press Fn+F5 to enable or disable the wireless features. You can quickly change the power state of each feature in the list. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Notes: To use this combination of the keys, ThinkPad PM device driver must have been installed on the computer. If you want to use the combination to put the computer into hibernation mode or do-nothing mode (in Windows XP, shut the computer down or show the panel for turning off the computer), change the settings in the Power Manager.
Page 64
Put the computer into hibernation mode. To return to normal operation, press the power button for less than four seconds. Notes: To use this combination of the keys, ThinkPad PM device driver must have been installed on the computer. Though the screen fades out immediately after Fn+F12 are pressed, the computer does not enter the hibernation mode immediately.
Page 65
Table 7. Fn key combinations (continued) Key combination Description Fn+End Select a power plan (in Windows XP, power scheme) that has been created by Power Manager or adjust the power level by using the slider control. When you press this combination of keys, a panel for selecting a power plan (in Windows XP, power scheme) or adjusting the power level appears.
Page 66
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Chapter 7. FRU replacement notices This chapter presents notices related to removing and replacing parts. Read this chapter carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Windows Notebook, this problem is addressed with special nylon-coated screws that have the following characteristics: •...
If you replace the system board, you must restore the serial number of the system unit to its original value. Before replacing the system board, save the original serial number by doing the following: 1. Install the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later, and restart the computer.
To check what ECAs have been previously applied to the machine, use the ECA Information Read/Write function on the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later. 1. Insert the LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later, and restart the computer.
Page 70
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Chapter 8. Removing and replacing a FRU This chapter presents directions and drawings for use in removing and replacing a FRU. Be sure to observe the following general rules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts.
Before servicing ThinkPad Edge 11” Some models of the ThinkPad Edge 11” you are servicing might have the SIM card that the customer has installed. If the computer you are servicing has the SIM card, remove it before you start the servicing.
1010 Battery pack Important notice for replacing a battery pack: ThinkVantage Toolbox have an automatic battery diagnostic that determines if the battery pack is defective. A battery pack FRU should not be replaced unless this diagnostic shows that the battery is defective. The only exception to this is if the battery pack is physically damaged or a customer is reporting a possible safety issue.
1020 Bottom door For access, remove this FRU: • “1010 Battery pack” on page 65 Table 9. Removal steps of bottom door Note: Loosen the screws , but do not remove them. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 75
Note: Applying labels to the bottom door The new bottom door FRU is shipped with a kit containing label. When you replace the bottom door, you need to apply the following labels: Serial number blank label 79x16 FCC label Homologation label Information label under battery Following labels need to be peeled off from the old bottom door, and need to be put on the new bottom door.
Table 10. Removal steps of HDD Torque Step Screw (quantity) Color M2 × 7 mm, small-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sure that the HDD connector is attached firmly. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
1040 DIMM For access, remove these FRUs in order: • “1010 Battery pack” on page 65 • “1020 Bottom door” on page 66 Table 11. Removal steps of DIMM Note: If the computer you are servicing has two DIMM slots and only one DIMM is used, the card must be installed in SLOT-0 ( ), but not in SLOT-1 ( ).
, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arrow. Step Screw (quantity) Color Torque M2 × 3 mm, small-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 79
Table 12. Removal steps of PCI Express Mini Card for wireless LAN (continued) When installing: Plug the gray cable into the jack marked MAIN or M, and the black cable into the jack marked AUX or A on the card. Chapter 8 Removing and replacing a FRU...
M2 × 3 mm, small-head, nylon-coated (1) Silver (1.85 kgfcm) Note: Plug the red cable into the jack marked MAIN, and the blue cable into the jack marked AUX on the card. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
1070 Keyboard For access, remove these FRUs in order: • “1010 Battery pack” on page 65 • “1020 Bottom door” on page 66 • “1030 Hard disk drive (HDD)” on page 68 Table 14. Removal steps of keyboard Torque Step Screw (quantity) Color M2 ×...
Page 82
Table 14. Removal steps of keyboard (continued) ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 83
Table 15. Installation steps of keyboard When installing the keyboard, do as follows: 1. Attach the keyboard connectors. 2. Attach the keyboard so that the front edge of the keyboard are under the frame as shown in this figure. 3. Secure the keyboard by tightening the screws from the bottom side of the computer. Chapter 8 Removing and replacing a FRU...
Note: The power-on board assembly (with cable) and the microphone are attached to the palm rest assembly. Step Screw (quantity) Color Torque M2 × 7mm, wafer-head, nylon-coated (3) Silver 0.181 Nm (1.85 kgfcm) ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 85
Table 16. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone (continued) Step Screw (quantity) Color Torque 0.181 Nm M2 × 7 mm, wafer-head, nylon-coated (3) Silver (1.85 kgfcm) When installing: Make sure that the connectors are attached firmly. Chapter 8 Removing and replacing a FRU...
Page 86
Table 16. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone (continued) Step Screw (quantity) Color Torque M2 × 2 mm, big-head, nylon-coated (2) Black 0.181 Nm (1.85 kgfcm) ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 87
Table 16. Removal steps of palm rest assembly, power-on board assembly (with cable), and microphone (continued) When installing: Make sure that all the projections of the palm rest assembly are attached firmly to the guide holes of the base cover. Chapter 8 Removing and replacing a FRU...
Table 17. Removal steps of BDC-2 Step Screw (quantity) Color Torque M2 × 3 mm, small-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sure that the connector is attached firmly. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Table 19. Removal steps of speaker assembly Step Screw (quantity) Color Torque M2 × 4 mm, wafer-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sure that the connector is attached firmly. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
1120 System board, fan assembly, and backup battery Important notices for handling the system board: When handling the system board, bear the following in mind. • The system board has an accelerometer, which can be broken by applying several thousands of G-forces. Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject the accelerometer to as much as 6,000 G's of shock.
Page 92
Table 20. Location of major sensitive components on the system board (continued) For AMD models: Accelerometer chip for the HDD Active Protection System™ North Bridge South Bridge ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 93
Table 21. Removal steps of system board, fan assembly, and backup battery Step Screw (quantity) Color Torque M2 × 4 mm, wafer-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) When installing: Make sure that the connectors are attached firmly. Chapter 8 Removing and replacing a FRU...
Page 94
When installing: Make sure that the connector is attached firmly. DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. When installing: Make sure that the connectors are attached firmly. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 95
Table 21. Removal steps of system board, fan assembly, and backup battery (continued) When installing: Before you attach the fan assembly to the system board, you need to peel the thin film off from the thermal rubbers as shown in this figure. For AMD models: For Intel models: Chapter 8...
Table 22. Removal steps of LCD unit Torque Step Screw (quantity) Color M2 × 4 mm, wafer-head, nylon-coated (2) Silver 0.181 Nm (1.85 kgfcm) In step , release all of the antenna cables from the cable guides. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 97
Table 23. Removal steps of LCD unit When installing: • Make sure that you route the cables firmly as shown in this figure. • When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
Table 24. Removal steps of CRT board assembly (with cable) When installing: Make sure that the connectors are attached firmly. Torque Step Screw (quantity) Color M2 × 4 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
1150 DC-in cable and base cover assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 65 • “1020 Bottom door” on page 66 • “1030 Hard disk drive (HDD)” on page 68 • “1070 Keyboard” on page 73 •...
Page 100
For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover. For the location of each label, refer the following figure: ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
• “1010 Battery pack” on page 65 • “2010 LCD bezel assembly” on page 93 Table 27. Removal steps of integrated camera When installing: Make sure that the connector is attached firmly. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
2030 LCD panel, hinges, and LCD cable For access, remove these FRUs in order: • “1010 Battery pack” on page 65 • “1020 Bottom door” on page 66 • “1030 Hard disk drive (HDD)” on page 68 • “1070 Keyboard” on page 73 •...
Page 104
DO NOT press the surface of the panel or apply any excessive force to the panel. Step Screw (quantity) Color Torque M2 × 3 mm, wafer-head, nylon-coated (4) Silver 0.181 Nm (1.85 kgfcm) ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 105
Table 28. Removal steps of LCD panel, hinges, and LCD cable (continued) Chapter 8 Removing and replacing a FRU...
: Wireless LAN AUX antenna (black) and wireless WAN AUX antenna (blue) : Wireless LAN MAIN antenna (gray) and wireless WAN MAIN antenna (red) ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Chapter 9. Locations This chapter presents the location of ThinkPad Edge 11” features and hardware. Front view Integrated camera (for some models) Power switch Universal serial bus (USB) connector Always on universal serial bus (USB) connector 4-in-1 Media Card Reader slot Power status indicators Note: For the description of each indicator, see Chapter 5 “Status indicators”...
An N in the CRU ID column means that the part is not a CRU. A single asterisk (*) means that the part is a Self-service CRU; two asterisks (**) means that the part is an Optional-service CRU.ThinkPad Notebooks contain...
60Y9896 60Y9966 60Y9913 60Y9983 Swiss Thai 60Y9920 60Y9990 Traditional Chinese 60Y9919 60Y9989 Turkish 60Y9914 60Y9984 U.K. English 60Y9915 60Y9985 U.S. English 60Y9886 60Y9956 U.S. English (International, with a Euro symbol) 60Y9916 60Y9986 ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Power cords A ThinkPad power cord for a specific country or region is usually available only in that country or region: Table 36. Parts list—2-pin power cords Country or region FRU no. Argentina 42T5020 42T5105 • models -CTO, xxY Brazil...
Recovery discs Windows 7 Home Basic (32 bit) DVDs Windows 7 Home Basic (32 bit) is preinstalled as the operating system in the following models: • 0328-CTO, 2Yx, 2Zx, 32x, 33x, 34x, 35x, 36x, 37x, 38x, 39x, 3Ax, 43x, 44x, 45x, 4Cx, 4Gx, 4Hx, 4Jx •...
Windows 7 Professional (64 bit) DVDs Windows 7 Professional (64 bit) is preinstalled as the operating system in the following models: • 0328-CTO, 23x, 26x, 27x, 28x, 29x, 2Kx, 2Nx, 2Sx, 2Vx, 3Gx, 3Mx, 3Nx, 3Px, 3Qx, 3Rx, 47x, 48x, 4Fx, 4Lx, 4Mx •...
Table 42. Parts list—Windows 7 Starter (32 bit) recovery DVDs Language Arabic 03W7193 Brazilian Portuguese 03W7194 India 03W7195 French 03W7196 Portuguese 03W7197 Russian English 03W7198 Russian 03W7199 Spanish 03W7200 Turkish 03W7201 US Disable 03W7202 US English 03W7203 ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
USB floppy diskette drive for maintenance diskette 05K9283 USB floppy diskette drive tool kit 27L3452 Test card for integrated Smart Card 42W7820 — LENOVO ThinkPad Hardware Maintenance Diskette Version 1.76 or later Note: Download the file from the following Web site: http://www.lenovo.com/spm Chapter 10 Parts list...
Page 126
ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Appendix A. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Intel is a trademark of Intel Corporation or its subsidiaries in the United States, other countries, or both. Other company, product, or service names may be the trademarks or service marks of others. ThinkPad Edge 11” and E10 Hardware Maintenance Manual...
Page 130
Part Number: 75Y6925 Printed in China (1P) P/N: 75Y6925 *75Y6925*...