Table of Contents
Advertisement
INSTALL THE RANGE
ANTI-TIP DEVICE INSTALLATION
2
An Anti-Tip bracket is supplied with
instructions for installation in a variety of
locations. The instructions include all
necessary information to complete the
installation. Read the Safety Instructions
and the instructions that fit your situation
before beginning installation.
Screw must
enter wood
or metal
Typical installation of anti-tip bracket attachment to wall
WARNING:
• Range must be secured by Anti-Tip bracket
supplied.
• If the Anti-Tip device supplied with the
range does not fit this application, use the
universal Anti-Tip device WB2X7909.
• See instructions to install (supplied with bracket).
• Unless properly installed, the range could
be tipped by stepping or sitting on the door.
Injury may result from spilled hot liquids
or from the range itself.
Installation Instructions
Wall plate
Bracket
LEVEL THE RANGE
3
A
Install the oven shelves in the oven and
position the range where it will be installed.
B
Check for levelness by
placing a spirit level or a
cup, partially filled with
water, on one of the
oven shelves. If using a
spirit level, take two
readings—with the level
placed diagonally first in one direction
and then the other.
Remove the storage drawer, broiler
C
drawer or kick panel. The front leveling
legs can be adjusted from the bottom
and the rear legs can be adjusted from
the top.
Adjust from
the bottom
Leg
leveler
Raise
range
Front leveling legs
(on some models)
Raise
range
Adjust from
the top
Rear leveling legs
(on some models)
D
Use an open-end or adjustable wrench
to adjust the leveling legs until the range
is level.
E
Replace the drawer or panel.
33
Spirit level
Lower
range
Lower
range
Front of range
Hide quick links:
Advertisement
Table of Contents
