Changing The Light Bulb; Noises During Operation - AEG SANTO Operating Instructions Manual
Hide thumbs
Also See for SANTO:
- Operating instructions manual (56 pages) ,
- Installation instructions manual (25 pages) ,
- Operating instructions manual (22 pages)
Table of Contents
Advertisement
The compressor does not
start immediately
pressing the COOLMATIC
or FROSTMATIC button, or
after changing the tem-
perature setting.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or disconnect from the
mains supply.
Light bulb data: 220-240 V,
1. To switch off, press the ON/OFF button until the mains power light
extinguishes.
2. Unplug the mains plug.
3. To change the light bulb,
rear hook and at the same time slide
the light bulb cover in the direction
indicated by the arrow.
4. Change the faulty light bulb.
5. Refit the light bulb cover.
6. Put the refrigerator back into opera-
tion.
Noises during Operation
The following noises are characteristic of refrigeration appliances:
• Clicks
Whenever the compressor switches on or off, a click can be heard.
• Humming
As soon as the compressor is in operation, you can hear it humming.
• Bubbling/Splashing
When refrigerant flows into thin tubes, you can hear bubbling or
splashing noises. Even after the compressor has been switched off,
this noise can be heard for a short time.
50
Symptom
after
Possible Cause
This is normal, no error has
occurred.
max. 25 W
press on the
Remedy
The compressor starts after
a period of time.
Hide quick links:
Advertisement
Table of Contents
