Troubleshooting tips ... Before you call for service
Problem
OTHER PROBLEMS
The door and inside of
the oven feels hot
Oven will not start
Cannot edit cooking
features
The pads on one side
of the control do not
function
frequency energy and if not installed and
used properly, that is in strict accordance with
the manufacturer's instructions, may cause
interference to radio and television reception. It
has been type tested and found to comply with
reasonable protection against such interference
guarantee that interference will not occur in a
particular installation. If this equipment does cause
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following:
30
Possible Cause
The heat lamps produce intense heat
in a small space.
A fuse in your home may be blown or
the circuit breaker tripped.
Some pre-programmed cooking
features may not be able to be edited
to prevent degradation of cooking
performance.
The control has locked out the use of
these pads and need to be reset.
What To Do
when ready.
Press and hold the Clear/Off pad on the other
side of the display for 30 seconds. If this does not
reset the control, it may be necessary to cycle the
circuit breaker.
television.
the receiver.
receiver.
Plug the microwave oven into a different outlet
so that microwave oven and receiver are on
different branch circuits.
The manufacturer is not responsible for any
modification to this microwave oven. It is
the responsibility of the user to correct such
interference.
unauthorized
49-80738-1