Using The Tape Counter - Samsung DVD-V 70 Instruction Manual
Samsung dvd-vcr instruction manual
Hide thumbs
Also See for DVD-V 70:
- Instruction manual (34 pages) ,
- Instruction manual (112 pages) ,
- Instruction manual (37 pages)
Table of Contents
Advertisement
VCR
Using the Tape Counter
GB
0:00:00
2
42
The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape counter to zero
3
When you are ready,
Start playback or Recording.
Press the
button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
➛ ➛
or
❿ ❿
.
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 30).
Press INFO.:
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples:
You wish to copy a video cassette with the help of a
second VCR .
You wish to play back and/or copy pictures taken
with a camcorder .
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the DVD-VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
VCR
GB
DVD
VCR
LINE2
1
DVD
VCR
LINE2
3
3
43
Advertisement
Table of Contents
