Canon FAX-L380 Quick Reference Manual page 15

Canon fax-l380 laser fax quick reference guide

Hide thumbs Also See for FAX-L380:

Table of Contents

Connect the power cord as follows:

Plug the supplied power cord into the power connector on the back of the machine.

Plug the other end of the power cord into the outlet.

NOTE

The machine has no power switch, so its power is on as long as it is plugged in. Once connected, though, the

machine still needs to warm up before you can use it.

While the machine is warming up, the message <PLEASE WAIT> appears in the LCD display:

PLEASE WAIT

When you connect the power cord to an AC outlet for the first time after purchase, <DISPLAY LANGUAGE> will

appear in the LCD display after <PLEASE WAIT>. In this case, set the language for the LCD display, and the

country*. (See "Setting the Display Language and Country*," on p. 1-9.)

The Fax standby mode appears:

31/12/2003 WED 15:11

FaxOnly

STANDARD

NOTE

If the toner cartridge has not been installed yet, the message <INSTALL CARTRIDGE> appears in the LCD

display, and the Alarm indicator flashes. In this case, install the toner cartridge. (See "Installing/Replacing the

Toner Cartridge," on p. 1-15.)

* The country selection feature is available for certain countries only.

Making Connections

1-8

Table of Contents