Related Manuals for DeWalt D25113-XE
Summary of Contents for DeWalt D25113-XE
- Page 1 INSTRUCTION MANUAL D25113-XE, D25114-XE, D25213-XE, D25314-XE, D25315-XE HEAVY-DUTY SDS ROTARY HAMMERS D25330-XE HEAVY-DUTY SDS CHIPPING HAMMER...
- Page 2 D25213-XE B. Depth rod C. SDS chuck D. Trigger switch/Variable speed trigger E. Forward/reverse control button F. Lock-on button (D25111-XE, D25113-XE, D25330-XE only) G. Mode selector H. Chisel rotation Components (Fig. 5–6, page 5) I. Mode selector button J. Sleeve K.
-
Page 3: Definitions: Safety Guidelines
b. Do not operate power tools in explosive atmospheres, such as in the pres- Definitions: Safety Guidelines ence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. The definitions below describe the level of severity for each c. -
Page 4: Electrical Safety
b. Use safety equipment. Always wear eye protection. Safety equipment such g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, as dust mask, non-skid safety shoes, hard hat, or hearing protection used for taking into account the working conditions and the work to be performed. - Page 5 • Wear ear protectors. Exposure to noise can cause hearing loss. NOTE: Do not overheat the bit (discoloration) while grinding a new edge. Badly worn chisels require reforging. Do not reharden and temper the chisel. • Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.Keep a firm grip on the tool at all times.
- Page 6 WARNING: Never modify the power tool or any part of it. Damage or personal injury working freely. could result. D25113-XE, D25114-XE ONLY (FIG. 1) These heavy-duty rotary hammers have been designed for professional drilling and hammerdrilling, screwdriving and light chipping at various work sites (i.e., To lock the trigger switch in the ON position for continuous operation, depress the construction sites).
-
Page 7: Operation
D25113-XE, D25114-XE CHISEL ROTATION To reverse the rotary hammer, turn it OFF and align the reversing lever (E) with the To manually rotate the chisel, depress the button and turn the mode selector so the yellow arrow pointing backward (viewed when holding drill in operating position). -
Page 8: Drilling Tools
DRILLING IN METAL prevent damage to the material. (D25113-XE, D25114-XE, D25213-XE, D25313-XE, D25314-XE) 1. Always unplug the drill when attaching or changing bits or accessories. An SDS to round shank adaptor chuck is required. Ensure that tool is in drill-only 2. -
Page 9: Maintenance
DRILLING IN MASONRY ACCESSORIES (D25113-XE, D25114-XE, D25213-XE, D25313-XE, D25314-XE) WARNING: Since accessories, other than those offered by D WALT, have not been When drilling in masonry, use SDS carbide tipped bits rated for percussion drilling and tested with this product, use of such accessories with this tool could be hazardous. - Page 10 This warranty gives you specific legal rights and you may have other rights under the SPECIFICATIONS provisions of the Consumer Guarantee Act 1993 (New Zealand only), Trade Practices D25113-XE, D25114-XE, D25213-XE, Act 1974 and State Legislation (Australia only). D25314-XE, D25315-XE...
- Page 12 WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 • 20 Fletcher Road, Mooroolbark, VIC 3138 Australia (JAN07) Form No. 495266-04 D25113-XE, D25114-XE, D25213-XE, D25314-XE, D25315-XE, D25330-XE Copyright © 2007 D WALT The following are trademarks for one or more D WALT power tools: the yellow and black color scheme;...