hit counter script
LG SA560 Owner's Manual
LG SA560 Owner's Manual

LG SA560 Owner's Manual

Laser projector
Hide thumbs Also See for SA560:
Table of Contents

Advertisement

Quick Links

Owner's Manual
LASER PROJECTOR
Please read the safety information carefully before using the product.
SA560
SA565
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG SA560

  • Page 1 Owner's Manual LASER PROJECTOR Please read the safety information carefully before using the product. SA560 SA565 www.lg.com...
  • Page 2: License

    LICENSE LICENSE Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Safety precautions are given in two forms, i.e. Warning and Caution as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product.
  • Page 4 SAFETY INSTRUCTIONS Read these instructions. Do not allow a tablecloth or curtain to Keep these instructions. block the air vent. Heed all warnings. - This may result in fire due to the Follow all instructions. increase in the internal temperature. Ensure good ventilation around the Indoor Installation projector.
  • Page 5 SAFETY INSTRUCTIONS The power plug should be inserted CAUTION fully into the power outlet. When placing the projector on a table - An unstable connection may cause or shelf, be careful not to put it near a fire. the edge. Do not place heavy objects on the - The projector could fall due to bal- The projector could fall due to bal-...
  • Page 6 In the event that there is a heavy Only use the official power cord pro- impact or the cabinet is damaged, vided by LG Electronics. Do not use switch it off, unplug it from the power other power cords. outlet and contact an authorized ser- - This may result in fire or electric vice center.
  • Page 7 SAFETY INSTRUCTIONS Never open any cover on the projector. CAUTION - There is a high risk of electric shock. Do not place heavy objects on the Do not look directly into the lens projector. when the projector is in use. - It may fall down and cause personal - The bright light may damage your injury.
  • Page 8 SAFETY INSTRUCTIONS Cleaning Others WARNING WARNING Do not spray the projector with When you go out, place the projector water when cleaning. Make sure water out of reach of animals, and remove does not flow into the projector. the power plug from the wall outlet. - This may result in fire or electric - Using a damaged power cord may shock.
  • Page 9 - This may result in fire or explosion due to damage to the battery. Always use batteries approved and certified by LG Electronics. - This will prevent damage or fire. Store batteries away from metallic objects, such as keys and paper clips.
  • Page 10 SAFETY INSTRUCTIONS Laser LASER RADIATION DO NOT STARE INTO BEAM WARNING CLASS 2 LASER PRODUCT This laser projector contains a laser module. Do not disassemble or modify the projector as this could be - This laser projector is a Risk Group 2 device dangerous.
  • Page 11: Table Of Contents

    CONTENTS CONTENTS LICENSE ENTERTAINMENT Network Settings SAFETY INSTRUCTIONS - One-Click Network Connection - Expert Settings for Network PREPARATION Connection - Wireless Network Connection Accessories - Tips for Network Settings Optional Extras To use the Wi-Fi Direct function Parts and Components To use the Intel(R) WiDi function - Front &...
  • Page 12 CONTENTS TIME Settings - To Clean Interactive Pen OPTION Settings - Operating Range with Interactive NETWORK Settings SUPPORT - To Use the Interactive Pen Functions CONNECTING DEVICES - Troubleshooting the Interactive Pen Function Connecting to HD Receiver, DVD, or VCR Player SERIAL COMMUNICATION - HDMI Connection FUNCTION...
  • Page 13: Preparation

    PREPARATION PREPARATION Accessories Accessories included with the project are show below. The pictures may differ slightly from the actual product. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. Remote Control Owner's Manual Power Cord Computer Cable Two AAA Batteries...
  • Page 14: Optional Extras

    PREPARATION Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice. PC Audio Port Connection Projection Screen HDMI Cable Cable Video Cable...
  • Page 15: Parts And Components

    PREPARATION Parts and Components The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction.
  • Page 16: Bottom

    PREPARATION Bottom Front Adjustable Foot Ceiling Mount Four Attachment Points Rear Foot When installing the projector on a ceiling or wall, a professional technician should install the product using the authorized tools. If installed improperly, the projector may fall. - This may cause personal injury or property damage. For installation of the product, please contact the customer support center.
  • Page 17: Back

    PREPARATION Back (For SA560 only) (For SA565 only)
  • Page 18: Control Panel

    PREPARATION Control Panel Button Description POWER Turns the projector on or off. MENU Displays or closes the Settings menu. AUTO Adjusts the picture position and minimizes image shaking. INPUT Selects the input signal (RGB, component, HDMI and external input). -, + Adjusts the volume level, or enters a sub menu and changes the settings.
  • Page 19: Projector Status Indicators

    PREPARATION Projector Status Indicators LED Indicator Temperature Indicator Power off state Power standby state Green (blinking) The projector is being turned on or off. LED Indicator Green The projector is being operated. The projector has been turned off due to a Orange (blinking) problem related to a projector color wheel.
  • Page 20: Installation

    PREPARATION Installation Installation Precautions Do not place the projector in a hot Place the projector in a well-ventilated or humid environment. environment. - Do not place the projector in a hot, cold, or humid environment. - To prevent internal heat build-up, Do not place the projector in a place install the projector in a well-ventilated where it will easily attract dust.
  • Page 21: Projection Distance Per Screen Size

    PREPARATION Projection Distance per Screen Size Place the projector on a sturdy, level surface, together with the PC or audio/video source. Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen.
  • Page 22: Assembling The Cover

    PREPARATION Assembling the Cover ① ② ③ Insert the upper edge of the cover into the groove. Slide the cover to the right until it latches into the groove. Insert the screw into the hole and tighten it. Check that the cover is securely fastened and cannot move. * You can remove the cover in reverse order.
  • Page 23: Remote Control

    REMOTE CONTROL REMOTE CONTROL Open the lid at the back of the remote control and insert the batteries as described in the instructions. Use new batteries and do not mix regular or rechargeable batteries. (1.5 V AAA) CAUTION y Do not mix new batteries with old ones. POWER Turns the projector on or off.
  • Page 24 REMOTE CONTROL MENU Brings up or closes the settings menu. AUTO Optimizes the screen automatically in RGB-PC input mode. Q.MENU Allows you to change the settings easily. Up/Down/Left/Right buttons Selects or sets an option of the selected menu. OK ꔉ Shows the current mode and saves changes to the settings.
  • Page 25: Using The Projector

    USING THE PROJECTOR USING THE PROJECTOR Watching Projector Initial Setup Connect the power cord correctly. After waiting for a moment, press the POWER button on the remote control or the control panel. When you turn on the Projector for the first time, a setting screen appears as shown below.
  • Page 26: Focus And Position Of The Screen Image

    USING THE PROJECTOR Focus and Position of the Watching with the Projector Screen Image In Standby mode, press the POWER button to turn the projector on. When an image appears on the screen, Press the INPUT button and select check if it is in focus and fits the screen the input signal you want.
  • Page 27: Additional Options

    USING THE PROJECTOR Additional Options Adjusting Aspect Ratio You can adjust the aspect ratio of the picture by pressing RATIO while 4:3 : Resizes the picture with a 4:3 watching with the projector. ratio. NOTE y Available options may vary depend- ing on the input signal.
  • Page 28: Using The Keystone Function

    USING THE PROJECTOR Using the Keystone Function Using the Input List To prevent the screen image from Using the Input List becoming trapezoidal, Keystone adjusts the top and bottom width of the image Press the INPUT button to display the if the projector is not set up at a right input selection screen.
  • Page 29: Using The Quick Menu

    USING THE PROJECTOR Using the Quick Menu You can customize frequently used menus. Select the Q.MENU button. User the button to select a desired item and press OK. Menu Description Aspect Resizes the picture. Ratio Picture Changes the picture mode. Mode Sound Sets the sound mode.
  • Page 30: Entertainment

    ENTERTAINMENT ENTERTAINMENT Network Settings Expert Settings for Network Connection To use the DLNA function and the When used in a specific environment Magical Mirroring function, the wireless such as office (where fixed IP, etc. is connection to the Internet is required. used).
  • Page 31: Wireless Network Connection

    ENTERTAINMENT Wireless Network Connection You can use a wireless network by using the built-in wireless network module as shown below. A wireless router must be installed and operating at this time. Refer to the wireless router's user manual to see how to install it. The network settings and connection may be different depending on the network envi- ronment.
  • Page 32: Tips For Network Settings

    Ask the router manufacturer LG Electronics is not responsible for whether the router supports wireless any Internet connection problems, or connection. any failure, error or malfunction due To connect to a wireless router, verify to your Internet connection.
  • Page 33: To Use The Wi-Fi Direct Function

    ENTERTAINMENT To use the Wi-Fi Direct function Wi-Fi Direct is a function that allows your projector to connect with a Wi-Fi Direct device without Internet connection. With SmartShare™, you can watch the files stored on a device connected via Wi-Fi Direct.
  • Page 34: To Use The Intel(R) Widi Function

    Press the MENU button on the You may not connect your projector remote control. Select NETWORK → to a non-LG Electronics device even Intel(R) WiDi. when it is detected. Set Intel(R) WiDi to On. (If you do It is recommended you to connect a not use it, please change it to Off.)
  • Page 35: Smartshare

    SMARTSHARE SMARTSHARE Tips for Using a USB Device A USB storage device installed using an automatic recognition program Before Using or its own driver might not be recognizable. Connecting a USB Storage Some USB devices may not be Device supported or will not work properly. Please use only a USB storage Connect a USB storage device (external device formatted as a FAT32 or NTFS...
  • Page 36: Connecting Dlna

    SMARTSHARE Connecting DLNA Supported Files for SmartShare™ Maximum data transmission rate: Digital Living Network Alliance (DLNA) 20 Mbps (Megabit per second) allows you to enjoy videos, music and Supported external subtitle formats: photos saved on your projector through *.smi, *.srt, *.sub (MicroDVD, a home network.
  • Page 37 SMARTSHARE Connecting DLNA DMR Connecting DLNA DMP (Digital Media Renderer) (Digital Media Player) If the PC's operating system is With a PC having SmartShare PC Windows 7 or Window 8 or the DLNA- Software, music / video / photo files certified device (e.g.
  • Page 38: Smartshare™ Pc Sw Installing & Setting

    You can run the programme when installation is complete. NOTE DLNA or Media Link service is only available if projector and other devices are connected via a single router. PC requirement for installing LG SmartShare™ Recommended Item Minimum Specifications Specifications Intel Pentium Dual Core or Intel Pentium4 2.0 G or higher/...
  • Page 39 SMARTSHARE In case of a DLNA malfunction If there are too many folders or files in a folder, it may not work properly. Check your network settings when the The information on the file imported DLNA option does not work properly. from the DLNA server may not be To watch the 1080p video through displayed correctly.
  • Page 40: Using Smartshare

    SMARTSHARE Using SmartShare™ Press the USB button on the remote control. You can watch the photo, music, video and document on the projector by connecting a USB or home network (DLNA). The photo, music, video and document files of all devices connected to the projector are displayed.
  • Page 41: Watching Videos

    SMARTSHARE Watching Videos * In Movie List, you can watch movies stored on the connected USB device. Tips for Playing Videos Some subtitles created by a user may not work. A video file and its subtitle file must be located in the same folder. A video file name and its subtitle file name must be identical in order to display the subtitle properly.
  • Page 42 SMARTSHARE Supported Video Codecs Maximum resolution: 1920 x 1080 @ 30p Extension Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profile .asf .wmv Audio WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, Video XViD, H.264/AVC, Motion Jpeg .divx .avi MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Audio...
  • Page 43 SMARTSHARE Controlling Video Playback You can control playback using the following buttons. List Option Item Description Shows the current playing position. Use the button to move forward ◀▶ or backward. ꕗ Stops playing and returns to Movie List. ꕖ Resumes normal playback. Pauses the media player.
  • Page 44: Viewing Photos

    SMARTSHARE Viewing Photos You can view photos stored on a connected device. Photo File File Format Item Profile Supported format SOF0: Baseline SOF1: Extend Sequential SOF2: Progressive (jpeg, jpg, Size Min. 64 x 64 jpe) Max. Normal Type (mm): 15360 (W) x 8640 (H) Progressive Type (mm): 1920 (W) x 1440 (H)
  • Page 45 SMARTSHARE Controlling Photo Playback You can control playback using the following buttons. Option List Slideshow Item Description Selects the previous or next photo. If no picture is selected, all photos in the current folder are displayed in a slide show. If some photos are selected, those photos are displayed in a Slideshow slide show.
  • Page 46: Listening To Music

    SMARTSHARE Listening to Music You can play audio files stored on the connected device. Audio File File Format Item Profile Bit rate 32 kbps - 320 kbps Sample freq. 16 kHz, 48 kHz Support MPEG1, MPEG2, Layer2, Layer3 Controlling Music Playback You can control playback using the following buttons.
  • Page 47: Viewing Files

    SMARTSHARE Viewing Files You can see document files stored on a connected device. Supported File Formats XLS, DOC, PPT, TXT, XLSX, PPTX, DOCX, PDF, HWP Microsoft Office 97/2000/2002/2003/2007 version Adobe PDF 1.0/1.1/1.2/1.3/ 1.4 version Hangul 97/2000/2002/2005/2007 File Viewer realigns a document, so it may look different from what is displayed on a For documents that include images, the resolution may look lower during the realigning process.
  • Page 48: Magical Mirroring

    MAGICAL MIRRORING MAGICAL MIRRORING Using Magical Mirroring The magical mirroring feature is used to wirelessly transmit and project the screen of a network- connected laptop (PC) to a projector. To use this feature, the MirrorOp Sender, an application for PC, should be installed in the user's laptop (PC). Please install this PC program using the Magical Mirroring program CD provided with this product.
  • Page 49: Running Magical Mirroring

    MAGICAL MIRRORING Running Magical Mirroring Select Magical Mirroring from the NETWORK. NETWORK • Network Connection • Network Status • Wi-Fi Direct • Intel(R) WiDi • Smart Share Setting • Magical Mirroring • eZ-Net Manager CAUTION y Magical Mirroring is available only when a network is connected. y When Magical Mirroring is running, only the following buttons are available on the remote control and control panel: Power, Volume, Previous and Exit.
  • Page 50 MAGICAL MIRRORING To the Remote Device IP field of the MirrorOp Sender, enter the IP which is the same as the host IP of the Magical Mirroring and press Connect. Quick Connect SSID Host IP User Name Connect Rescan <PC Screen> When the MirrorOp Sender is connected properly, the connected PC is displayed under Magical Mirroring Device List as shown below.
  • Page 51: Mirrorop Sender

    MAGICAL MIRRORING MirrorOp Sender Changing MirrorOp Mode ꔈMove the button to this position to change the transfer mode to Application Mode. ꔈMove the button to this position to change the transfer mode to Movie Mode. Mode Description Application Mode When MirrorOp is set to this mode, the software will transfer images with greater quality.
  • Page 52: Projection Quality

    MAGICAL MIRRORING Configuring MirrorOp - Search Remote Box Select this option to search devices available on the connected network. - Projection Quality Select this option to change the projected image quality. If the network connection is good, select the Best; if not, Normal. - Projection Source Select this option to set the screen to show through the projector.
  • Page 53: Advanced Screen Capture

    MAGICAL MIRRORING - TV Offset Compensation Select this option to adjust the screen size projected by the projector. Adjust the horizontal/vertical offset and click the Apply button. - Auto Power Management Select this option when running the MirrorOp application on a laptop. When you choose this option, a Wi-Fi network will provided at an optimum level.
  • Page 54: Customizing Settings

    CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETUP Menu Press the MENU button. Use the button to select the desired item and press the OK button. Use the button to set up the desired item and press the OK button. Press the EXIT button when completed. Menu Description PICTURE...
  • Page 55: Picture Settings

    CUSTOMIZING SETTINGS PICTURE Settings Press the MENU button. PICTURE Use the button to select PICTURE ︿ • ꕊ Energy Saving : Maximum and press the OK button. • Picture Mode : Standard • Contrast Use the button to set up the de- •...
  • Page 56 CUSTOMIZING SETTINGS Item Description Contrast Increases or decreases the gradient of the video signal. Bright- Adjusts the base level of the video signal to make the image brighter or ness darker. Sharp- Adjusts the level of sharpness in the edge between the light and dark ness areas of the picture.
  • Page 57: Advanced Control

    CUSTOMIZING SETTINGS Advanced Control Item Description Dynamic Adjusts the contrast to keep it at the best level for the brightness of Contrast the screen. Dynamic Color Adjusts screen colors so that they look natural. Clear White Makes the white area of the screen look brighter and whiter. Preferred Skin Color Adjusts the skin color in the picture to your preference.
  • Page 58 CUSTOMIZING SETTINGS Item Description White Balance Adjusts white balance. Detailed adjustment is possible as shown below. Color Temperature: Select Warm, Cool, Medium or Natural. a. Method: 2 points - Pattern: Inner, Outer - Contrast Red/Green/Blue, Brightness Red/Green/Blue: Adjustable range -50 - +50. b.
  • Page 59: Sound Settings

    CUSTOMIZING SETTINGS SOUND Settings Press the MENU button. SOUND Use the button to select SOUND ︿ • Sound Mode : Standard and press the OK button. • User EQ • Volume Mode Use the button to set up the • Virtual Surround : Off desired item and press the OK button.
  • Page 60: Time Settings

    CUSTOMIZING SETTINGS TIME Settings Press the MENU button. TIME Use the button to select TIME and • Sleep Timer : Off press the OK button. • Auto Off : 60 min. • Automatic Standby : 4 hours Use the button to set up the •...
  • Page 61: Option Settings

    CUSTOMIZING SETTINGS OPTION Settings Press the MENU button. OPTION Use the button to select OPTION ︿ • Language and press the OK button. • Caption : Off • Set ID Use the button to set up the • PJT Mode : Front desired item and press the OK button.
  • Page 62: Network Settings

    CUSTOMIZING SETTINGS Item Description Monitor Out You can select one of the two RGB inputs connected as an output of the RGB OUT port. When Auto is selected, the current input you are watching is dis- played, among RGB1 and RGB2 inputs. Auto Input Automatically searches for and displays the input signal type when it is Search...
  • Page 63 CUSTOMIZING SETTINGS Item Description Smart Share Changes the settings for SmartShare. Setting Item Projector Changes the name that appears when searching for Name the Projector from other devices. Share My Allows / prevents connection to the Projector from Projector other devices. Turns DMR (Digital Media Renderer) connection on/off.
  • Page 64: Support

    CUSTOMIZING SETTINGS SUPPORT Press the MENU button. SUPPORT Use the button to select SUP- • Software Update PORT and press the OK button. • Product/Service Info. Use the button to set up the • Self Diagnosis desired item and press the OK button. - To return to the previous menu, press the ꕣ...
  • Page 65: Connecting Devices

    CONNECTING DEVICES CONNECTING DEVICES You can connect various external devices to the projector. The ports on the back of the projector are designed for the ceiling installation, so their label is printed upside down for your convenience. The picture may be different from the actual product. Computer/Notebook Video Digital Device...
  • Page 66: Connecting To Hd Receiver, Dvd, Or Vcr Player

    CONNECTING DEVICES Connecting to HD HDMI to DVI Connection Receiver, DVD, or VCR Using an HDMI to DVI cable, Player connect the projector's HDMI IN port to the DVI OUT port. To output audio, use an audio cable for connection. Connect an HD receiver, DVD, or VCR Press the INPUT button on the remote player to the projector and select an...
  • Page 67: Pc Connection

    CONNECTING DEVICES PC Connection HDMI to DVI Connection Using an HDMI to DVI cable, The projector supports Plug & Play. Your connect the projector's HDMI IN port to PC will automatically detect the projector the DVI OUT port. To output audio, and requires no driver installation.
  • Page 68: Hdmi Connection

    CONNECTING DEVICES HDMI Connection RGB to DVI Connection With an HDMI cable, you can enjoy Connect the projector's RGB IN 1 or high quality picture and sound. Connect RGB IN 2 port to the DVI OUT port. the projector's HDMI IN port to the HDMI To output the audio, connect the PC to output port.
  • Page 69: Connecting To External Devices

    CONNECTING DEVICES Connecting to Component Connection External Devices You can enjoy vivid images when you connect an external device with a component port to the COMPONENT IN AV Connection port of the projector. Press the INPUT button on the remote control to select Connect the output ports of an external Component.
  • Page 70: Connecting To Headphones

    CONNECTING DEVICES Connecting to Connecting to a Headphones Microphone Microphone Connection Headphone Connection You can listen to the audio through a You can connect a microphone to the MIC IN port of the projector. headphone. * Optional Extras * Optional Extras...
  • Page 71: Connecting To A Laptop

    CONNECTING DEVICES Connecting to a Laptop HDMI Connection Connect the projector's HDMI IN port to You can connect the projector to a the HDMI output port. laptop to use various functions. RGB Connection You can connect your laptop to the RGB IN 1 or RGB IN 2 port of the projector.
  • Page 72 CONNECTING DEVICES The table below shows examples of switching the output. For more infor- mation, refer to the External Output, Connecting to an External Monitor, or similar sections of the owner's manual of your computer. Brand Switching Output [Fn]+[F3] Panasonic [Fn]+[F3] Toshiba [Fn]+[F5]...
  • Page 73: Interactive Function

    INTERACTIVE FUNCTION (For SA565 only) INTERACTIVE FUNCTION To Connect the Interactive Pen to the PC Connect the USB A to B cable from the projector's USB 1 (INTERACTIVE/SVC) port and a PC USB port. Connect the interactive dongle to the projector's INTERACTIVE port. Pairing CAUTION y Up to two pens can be used at the same time.
  • Page 74: Using The Interactive Pen

    INTERACTIVE FUNCTION (For SA565 only) Using The Interactive Pen Interactive Pen and Button Front Back ❶ ❺ ❻ ❼ ❽ ❷ ❸ ❹ ❾ Function/ Button Description ❶ Power Button Turns the interactive pen on/off. ❷ Used for pairing. ❸ Functions the same as a right mouse button.
  • Page 75: Using The Interactive Pen Button

    INTERACTIVE FUNCTION (For SA565 only) Using the Interactive Pen Button Function Description Left Mouse Click Press the button or push the Pen tip. Right Mouse Click Press the button. Go to Interactive and set Pairing Mode to Fixed. Then, press and hold the button more than three seconds within Enter Fixed mode ten seconds.
  • Page 76: To Charge The Interactive Pen

    INTERACTIVE FUNCTION (For SA565 only) To Charge the Interactive Pen To charge the battery, connect the interactive pen to the PC with the charging cable. (Check that the PC is turned on before connection.) The battery light stays on during charging and will turn off when charging is complete. When charging is complete, disconnect the charging cable in order to use the pen.
  • Page 77: Description Of Led Interactive Pen Indicators

    INTERACTIVE FUNCTION (For SA565 only) Description of LED Interactive Pen Indicators LED 1 LED 2 LED Indicators Pen Operation (LED 1) (LED 2) Charging battery The green light is on Battery charging The red LED flashes once required every four seconds. Open Mode The green light quickly - Searching a projector...
  • Page 78: To Replace The Pen Tip

    INTERACTIVE FUNCTION (For SA565 only) To Replace the Pen tip When the pen tip is worn out, replace it as shown in the figure below. Open Close Turn the pen tip to the right to Turn the pen tip to the left to remove it from the interactive install it onto the interactive pen, as shown in the figure...
  • Page 79: Operating Range With Interactive Pen

    INTERACTIVE FUNCTION (For SA565 only) Operating Range with Interactive Pen y It is designed to work on the screen with the size of 1778 mm - 2540 mm. y You can use two Interactive pens at the same time. y Actual operating range may slightly differ from the diagram. y If the projector screen darkens due to the surrounding environment, the operating range of the interactive pen may be affected.
  • Page 80: To Use The Interactive Pen Functions

    INTERACTIVE FUNCTION (For SA565 only) To Use the Interactive Pen Functions Make sure that the Computer/Laptop screen is displayed on the projector screen. Press the MENU button. OPTION Select OPTION using the Interactive Single Pen , and buttons, and press the OK •...
  • Page 81: Troubleshooting The Interactive Pen Function

    INTERACTIVE FUNCTION (For SA565 only) Troubleshooting the Interactive Pen Function Problem Troubleshooting Check that the interactive pen function is turned on. Check that the interactive dongle is connected to the projector. I can't use or connect Press the interactive pen's power button to check that the the interactive pen.
  • Page 82: Serial Communication Function

    SERIAL COMMUNICATION FUNCTION SERIAL COMMUNICATION FUNCTION Using Serial Communication If the projector is connected to a PC through an RS-232C cable, you can use the PC to control functions of the projector such as power On/Off or input selection, etc. It cannot be used with the eZ-Net Manager concurrently.
  • Page 83: Communication Parameter Setup

    SERIAL COMMUNICATION FUNCTION Communication Parameter Setup Baud Rate: 9600 bps (UART) Stop bit: 1 bit Data Length: 8 bits Flow Control: none Parity: none Communication code: ASCII code Communication Protocol Transmission [Command1] [Command2] [ ] [Set ID] [ ] [Data] [Cr] [Command1]: The first command to control the projector (k.
  • Page 84 SERIAL COMMUNICATION FUNCTION Error Acknowledgement [Command2] [ ] [Set ID] [ ] [NG] [Data] [x] * If a set receives an abnormal piece of data such as a non-supported function or there is a communication error, it returns ACK in the above format. Data [00] : illegal code (This command is not supported.) Data Structure...
  • Page 85: Command Reference List

    SERIAL COMMUNICATION FUNCTION Command Reference List Command 1 Command 2 Data (Hexadecimal) 01. Power 00 - 01 02. Aspect Ratio 03. Blank Image 00 - 01 04. Contrast 00 - 64 05. Brightness 00 - 64 06. Color 00 - 64 07.
  • Page 86 SERIAL COMMUNICATION FUNCTION 01. Power (Command: ka) 03. Blank Image (Command: kd) ► Powers the set on/off. ► Enables/disables the blank image. Transmission [k][a][][Set ID][][Data][Cr] Transmission [k][d][][Set ID][Data][Cr] Data 00: Screen Mute Off (picture on) 00: Power Off Data 01: Screen Mute On (picture off) 01 : Power On Ack [d][][Set ID][][OK][Data][x] Ack [a][][Set ID][][OK][Data][x]...
  • Page 87 SERIAL COMMUNICATION FUNCTION 06. Color (Command: ki) 09. OSD Select (Command: kl) ► Adjusts the color. ► Selects OSD On/Off. Disabled when the Black mode is selected. Transmission [k][l][][Set ID][][Data][Cr] Transmission [k][i][][Set ID][][Data][Cr] 00: OSD selection mode off Data Data Min: 0H - Max: 64H 01: OSD selection mode on (* Transmitted in hexadecimal code) Ack [l][][Set ID][][OK][Data][x]...
  • Page 88 SERIAL COMMUNICATION FUNCTION 12. Black Level (Command: nm) 15. Input Select (Command: xb) ► Select the input signal of the set. ► Adjusts the black level. Transmission [x][b][][Set ID][][Data][Cr] Disabled when the Black mode is selected. Transmission [n][m][][Set ID][][Data][Cr] Data 20: AV 40: Component 00: Low...
  • Page 89 SERIAL COMMUNICATION FUNCTION 17. Picture Mode (Command: ns) 20. Monitor Out (Command: nr) ► Sets the picture mode. ► Select either RGB1 or RGB2 input as an output of the RGB OUT port. Transmission [n][s][][Set ID][][Data][Cr] Transmission [n][r][][Set ID][][Data][Cr] Data Data 00: Vivid 01: Standard...
  • Page 90: Key Code

    SERIAL COMMUNICATION FUNCTION Key Code Key Name Key Code Key Name Key Code ∧ 0x40 KEY.S ▼ 0xA5 0x41 0xE4 ∨ > 0x06 0x7C < 0x07 MUTE 0x09 POWER 0x08 HELP 0x81 INPUT 0xEF STILL 0xBC EXIT ꕯ MENU 0x43 0x5B (BACK) 0x28...
  • Page 91: Maintenance

    MAINTENANCE MAINTENANCE Clean your projector to keep it in optimal condition. Cleaning Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens.
  • Page 92: Updating Software

    MAINTENANCE Updating Software When software update is required, run the software update to obtain the latest software version. You can manually check for and download any software updates. Press the MENU button. Select SUPPORT and go to Software Update. Item Description Software Update Enable this option.
  • Page 93: Wireless Specifications

    WIRELESS SPECIFICATIONS WIRELESS SPECIFICATIONS Wireless Specifications of the Interactive Dongle/Pen (For SA565 only) y The interactive pen communicates with the interactive a projector's interactive dongle. Frequency Range 2400 MHz - 2483.5 MHz Modulation Transmission power 0 dBm Receive sensitivity -82 dBm Data Rate 500 kbps...
  • Page 94: Specifications

    SPECIFICATIONS SPECIFICATIONS SA560 (SA560-JP) / Model SA565 (SA565-JP) Resolution (Pixel) 1280 (Horizontal) × 800 (Vertical) Aspect ratio 16:10 (Horizontal:Vertical) Panel size (mm) 16.51 Projection distance 0.452 m - 0.711 m (177.8 cm - 279.4 cm) (Video size) Ratio of upward...
  • Page 95: Supported Monitor Display

    PC disclaimers and copyright notices are type. available for download. Component Port Connection LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of perform- Component Signal...
  • Page 96 The model and serial number of the projec- tor are located on the back or on the side of the projector. Record them below should you ever need service. MODEL SERIAL...

This manual is also suitable for:

Sa565

Table of Contents