hit counter script

About This Manual - JVC UX-J99DVD Instructions Manual

Jvc micro component md system instructions
Table of Contents

Advertisement

Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to
obtain the best possible performance from your unit, and retain this manual

About This Manual

This manual is organized as follows:
• This manual mainly explains operations using the buttons on
the remote control.
You can use the buttons both on the remote control and on the
unit for the same operations if they have the same or similar
names (or marks), unless mentioned otherwise.
• Basic and common information that is the same for many
functions is grouped in one place, and is not repeated for each
procedure. For instance, we do not repeat the information about
turning on/off the unit, setting the volume, changing the sound
effects, and others, which are explained in the section "Basic and
Common Operations" on pages 10 to 12.
• The following symbols are used in this manual:
Gives you warning and caution to prevent damage
or risk of fire/electric shock.
In addition, we put information here about
conditions which will prevent getting the best
possible performance from the unit.
Gives you information and hints you need to know.
Precautions
Installation
• Install in a place which is level, dry and neither too hot nor too
cold—between 5˚C and 35˚C.
• Install the unit in a location with adequate ventilation to prevent
internal heat buildup.
• Leave sufficient distance between the unit and the TV.
• Keep the speakers away from the TV to avoid interference with
TV.
DO NOT install the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or vibration.
1
for future reference.
Power sources
• When unplugging the unit from the wall outlet, always pull on the
plug, not the AC power cord.
Moisture condensation
Moisture may condense on the lenses inside the unit in the following
cases:
• After starting to heat the room.
• In a damp room.
• If the unit is brought directly from a cold to a warm place.
Should this occur, the unit may malfunction. In this case, leave the
unit turned on for a few hours until the moisture evaporates, unplug
the AC power cord, then plug it in again.
Others
• Should any metallic object or liquid fall into the unit, unplug the
AC power cord and consult your dealer before operating any
further.
• If you are not going to operate the unit for an extended period of
time, unplug the AC power cord from the wall outlet.
If anything goes wrong, unplug the AC power cord and consult your
dealer.
DO NOT handle the AC power cord with wet
hands.
DO NOT disassemble the unit since there are no
user serviceable parts inside.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ux-j99dvdahCa-uxj99dvdSp-uxj99dvd

Table of Contents