IBM pSeries 670 Service Manual page 121

Hide thumbs Also See for pSeries 670:

Table of Contents

The following table shows floor-loading specifications for systems with acoustical covers. The values

contained in the Condition column are described following the table.

Definition of Conditions:

v Condition 1 indicates maximum floor loading when systems are stored cover-to-cover on all four sides with covers

v Conditions 2 and 3 indicate floor loading when the system has no side clearance (beyond side covers) on both

sides while front/back distances varied.

v Conditions 4 through 8 indicate floor loading at various points below the maximum weight-distribution distance of

762 mm (30.0 in.) from each edge of the frame.

v Conditions 9 through 10 indicate floor-loading options when the installation is limited to 342.0 kg/m

v Condition 11 is the minimum floor loading required, based on the maximum weight-distribution area (30.0 in. from

each side of the base frame).

1. Service clearance is independent from weight-distribution distance and must be at least 45 in. at the front of the

frame and 36 in. at the rear of the frame (measured from the base frame).

2. Weight-distribution areas should not be overlapped.

3. Floor-loading weight distribution distances should not exceed 762 mm (30 in.) in any direction when measured

from the base frame.

1019.7 (208.9)

643.0 (131.7)

601.8 (123.3)

453.6 (92.9)

427.3 (87.5)

358.2 (73.4)

339.5 (69.5)

342.0 (70.0)

305.4 (62.6)

290.9 (59.6)

Chapter 1. Reference Information

Chapters

Table of Contents