Table of Contents
Advertisement
(Continued)
Preferences
AUDIO
Items
Contents (
DIGITAL
Select an output signal type from the
AUDIO
following in accordance with the
OUTPUT
equipment connected to the digital audio
output terminal (AV amplifier, etc.). (See the
list below for the preference items and
output signal.)
PCM ONLY:
Equipment corresponding only to linear PCM.
DOLBY DIGITAL/PCM:
Dolby digital decoder or equipment having the
same function.
STREAM/PCM
DTS/Dolby digital decoder or equipment
having the same function.
DOWN MIX
Switch signal from the digital output
terminal of the DVD VIDEO according to
the connected equipment. Select this when
Digital Audio Output is set to "PCM ONLY".
DOLBY SURROUND
A dolby pro logic decoder-built-in equipment.
STEREO:
An ordinary equipment.
• When 3D phonic is activated, Down Mix
does not work.
D (Dynamic).
To make adjustments for the difference
RANGE
between a high volume and a low volume
COMPRESSION
when playing back with low volume (only
for a DVD recorded with Dolby digital).
:
AUTO
D. range compression automatically works.
ON:
D. range compression always works.
List of relationships of DIGITAL AUDIO OUTPUT preference items and output
signal
Playback disc
48 kHz, 16/20/24 bits
Linear PCM DVD VIDEO
96 kHz linear PCM DVD VIDEO
48/96/192 kHz,
16/20/24 bits linear PCM DVD AUDIO
44.1/88.2/176.4 kHz,
16/20/24 bits linear PCM DVD AUDIO
DTS DVD VIDEO
DOLBY DIGITAL DVD VIDEO/
DVD AUDIO
CD/VCD/SVCD
DTS CD
MP3/WMA disc
NOTE
• For a DVD VIDEO without content protection set, there is a 20 bit or 24 bit output at the digital audio output terminal.
39
: initial setting)
:
:
STREAM/PCM
DTS bit stream
DOLBY DIGITAL bit stream
44.1 kHz, 16 bits stereo linear PCM/48 kHz, 16 bits linear PCM
DTS bit stream
OTHERS
Items
Contents (
RESUME
(
page 24)
ON SCREEN
Select whether you display guide icons on
GUIDE
the on-screen guide indicating status of a
disc/main unit (For details on the guide
icons, refer to page 23)
AV COMPU
When you want to control JVC TV by using
LINK MODE
this product, select a mode that matches
the terminal from the following. (For more
details, refer to "Using AV COMPU LINK"
on page 51.)
DVD1
:
Connect to the video-3 input on the TV set.
DVD2:
Connect to the video-1 input of the TV set.
DVD3:
Connect to the video-2 input of the TV set.
PARENTAL
Set the parental lock function to cut off
LOCK
violent scenes or replace the scenes with
others. (This is effective only for discs
equipped with the parental lock function.)
COUNTRY CODE (
Select your country or area.
SET LEVEL:
The restriction is stricter as the number
becomes smaller. "NONE" is no restriction.
PASSWORD (essential):
Enter four-digit number as your password
using the number buttons (1-9, 0) every time.
(Enter "8888" if you forget your password.)
The password is required at the time of
playback.
• If you enter a wrong password three times,
"EXIT" will be automatically selected.
DIGITAL AUDIO OUTPUT preference
DOLBY DIGITAL/PCM
48 kHz, 16 bits stereo linear PCM
48 kHz, 16 bits stereo linear PCM
44.1 kHz, 16 bits stereo linear PCM
48 kHz, 16 bits stereo linear PCM
44.1 kHz, 16 bits linear PCM
32/44.1/48 kHz, 16 bits linear PCM
Introduction
: initial setting)
page 40)
PCM ONLY
48 kHz, 16 bits stereo linear
PCM
- Quick Links:
- Micro Component System
- Specifications
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
