hit counter script
Download
Share
Print this page
D-Link DI-713 Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DI-713
  6. Quick installation manual
D-Link DI-713 Quick Installation Manual

D-Link DI-713 Quick Installation Manual

Hide thumbs Also See for DI-713:
1
2
3
4
5

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version
D-Link
DI-713 Quick Installation Guide
1. Hardware Installation
A. Setup the LAN connection:
1.
Wired LAN connection: connect an Ethernet cable from your computer's
Ethernet port to one of the LAN ports of the DI-713.
2. Wireless LAN connection: make sure the antennas are in a vertical position (if
not, rotate more than 90 degrees).
B. Power on: plug the power cord into the back of the DI-713 and connect the AC
adapter to a power outlet and turn the power switch on. The DI-713 will
automatically enter the self-test phase. When in the self-test phase, the indicators M1
and M2 will be lit for about 5 seconds, and then M1 and M2 will flash three times to
indicate that the self-test operation has finished. The M1 LED will flash continuously
once per second to indicate that the DI-713 is in normal operation.
C. Setup the WAN connection: connect the network cable from your cable or DSL
modem to the WAN port of the DI-713. If you don't see a link light on the WAN
LED after everything is connected and turned on, try the network cable provided
with the DI-713. When the WAN LED light is lit, the connection to your cable or
DSL modem is complete.
2. Find and Write Down Your Computer's Internet Settings
A. Open the Control Panel
B. Find and Double Click the Network Icon
C. Click the Identification Tab
Rev: 10102000

Advertisement

loading

Related Manuals for D-Link DI-713

Summary of Contents for D-Link DI-713

  • Page 1 C. Setup the WAN connection: connect the network cable from your cable or DSL modem to the WAN port of the DI-713. If you don’t see a link light on the WAN LED after everything is connected and turned on, try the network cable provided with the DI-713.
  • Page 2 STOP! D. Write down your “Computer name: (like “My Computer” in the above picture In order to continue, you need to determine whether or not you are using PPPoE. including spaces and any punctuation) in the Settings box in Step 2-G. What is PPPoE? PPPoE stands for Point-to-Point Protocol over Ethernet.
  • Page 3 IP Address ______.______.______.______ Subnet Mask ______.______.______.______ Gateway ______.______.______.______ Primary DNS ______.______.______.______ Secondary DNS ______.______.______.______ H. Write down whether "Obtain An IP Address Automatically" or "Specify an IP Address" is checked in the “Type of Address” box in the Settings Box. If "Obtain An IP Address Automatically"...

  • Page 4: Reconfiguring Your Computer

    3. Reconfiguring your computer You are now ready to reconfigure your computer to work with the DI-713. If you are using a wireless network card to access the DI-713, change the following settings of the wireless network card to: ESSID: default...
  • Page 5 “Help” button or refer to the User’s Manual – Chapter 4.4. After all of the items are set, press the “Save” button and reboot the DI-713. Congratulations! You have now successfully installed your new D-Link DI-713. Execute Internet Explorer or Netscape to access the Internet and test the functionality of the DI- 713.