Table of Contents
Advertisement
– Initial Settings –
Clock Setting
Perform clock setting only if the clock has not been set correctly
by the Plug&Play setting or if you use a cable box.
Preparations
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "INITIAL
SET", then press OK or
.
e
B
Access Clock Set screen
Press
to move the highlight bar
rt
(arrow) to "CLOCK SET", then press OK or
.
e
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps 1 1 1 1 to 2 2 2 2 in
"Preparations" above, then go to the following steps.
NOTE:
The time set previously will be erased when "AUTO CLOCK",
"HOST CH", "D.S.T." or "TIME ZONE" setting is changed.
A
Set Auto Clock to ON
Press OK or
on the Remote repeatedly
e
to move the highlight bar to "AUTO
CLOCK", then press
so that "ON" is
rt
selected.
B
Select host channel
You can either select "AUTO" or enter a PBS channel number.
Press OK or
to move the highlight bar to "HOST CH", then
e
press
repeatedly until "AUTO" or the desired PBS channel
rt
number is selected.
C
Select D.S.T. mode
Press OK or
to move the highlight bar to "D.S.T.", then press
e
repeatedly until the desired setting is selected.
rt
AUTO: Select if you want to adjust your VCR's clock
automatically by the incoming signal from the host
channel. (Auto Daylight Saving Time enables automatic
adjustment of the VCR's clock at the start and end of
Daylight Saving Time.) Be sure to select the correct time
zone manually in step 4 4 4 4 .
ON:
Adjustment will be made by the built-in clock itself.
OFF:
Select when Daylight Saving Time does not apply to you.
D
Select time zone
Press OK or
to move the highlight bar to "TIME ZONE", then
e
press
repeatedly until "AUTO" or the desired time zone is
rt
selected. Each time you press the button, the time zone changes
as follows:
AUTO
ATLANTIC
EASTERN
{
{
{
MOUNTAIN
PACIFIC
{
{
{
(back to the beginning)
{
E
Complete Semiauto Clock Set
Press MENU to return to normal screen. Turn off the VCR. "Aut"
will appear on the display panel while the clock is being set. The
current clock time will appear automatically when the clock
setting is complete.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
to
rt
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE
ENGLISH
GUIDE CHANNEL SET
CABLE BOX SET
DBS RECEIVER SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
CLOCK SET
TIME
DATE
1:00PM
12/24
AUTO CLOCK : ON
HOST CH
: AUTO
D.S.T.
: AUTO
TIME ZONE : AUTO
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
CENTRAL
{
ALASKA
HAWAII
{
Setting clock manually
— Manual Clock Set
First follow steps 1 1 1 1 to 2 2 2 2 in "Preparations" above, then go to the
following steps.
A
Set time, date and year
Press
until the desired time appears,
rt
then press OK or
in the same way.
Holding
rt
minute intervals, or changes the date in
15-day intervals.
B
Select D.S.T. mode
Press OK or
e
"D.S.T.", then press
desired setting.
ON: Adjustment will be made by the
built-in clock itself.
OFF: Select when Daylight Saving Time
does not apply to you.
C
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or
e
blinks, then press
Tuner Setting
YEAR
00
SUN
(CATV)
Setting channels automatically
— Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "TUNER
SET", then press OK or
B
Perform Auto Channel Set
Press
to move the highlight bar
rt
(arrow) to "AUTO CHANNEL SET", then
press OK or
e
band (TV or CATV) automatically during
Auto Channel Set.
When Auto Channel Set is complete,
"SCAN COMPLETED" appears on
screen.
If the scan was unsuccessful, "SCAN
COMPLETED–NO SIGNAL–" appears
on screen. Check the connections and
start again.
Press MENU to return to normal screen.
. Set the date and year
e
changes the time in 30-
to move the highlight bar to
to select the
rt
repeatedly until the item you want to change
.
rt
to
rt
.
e
. The VCR selects the correct
CLOCK SET
TIME
DATE
YEAR
– –:– –AM
1/ 1
00
AUTO CLOCK : ON
HOST CH
: AUTO
(CATV)
D.S.T.
: AUTO
TIME ZONE : AUTO
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME
DATE
YEAR
1 : 00 AM
12/ 24
00 SUN
AUTO CLOCK : OFF
D.S.T.
: ON
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND
CATV
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
Advertisement
Table of Contents
