Page 1
Transceiver with BL-4C 860mAh Li-Ion battery pack Talk Standby time Note time China :2 to 8.3 days Depends on hours SEAP/MEA/LTA: 4 to 8.3 network days parameters Environmental characteristics: • Lead-free soldered ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
Linda.Yan Reason Updated this version Significant 1. General information modification. Changes since 2. Disassembly picture 11 (access door) should be eliminated. last version 3. Rename the phone as Nokia 1508/1508i. Version # Status Review Date Author V0.3 Draft Daisy.Qian , April Linda.Yan...
1508i RM 430 Service Manual Level 1&2 The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential.
3. Use only approved components as specified in the parts list. 4. Ensure all components, modules screws and insulators are correctly re–fitted after servicing and alignment. 5. Ensure all cables and wires are repositioned correctly. ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
1508i RM 430 Service Manual Level 1&2 4. ESD PROTECTION Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing the phone. Any product of which the covers are removed must be handled with ESD protection. The SIM card can be replaced without ESD protection if the product is otherwise ready for use.
When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery. Use only batteries approved by the phone manufacturer and recharge the battery only with the chargers approved by the manufacturer. ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
Page 8
Battery performance is particularly limited in temperatures well below freezing. Do not dispose batteries in a fire! Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste. ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
1508i RM 430 Service Manual Level 1&2 7. EXPLODED VIEW See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
USB connector of the phone and allows Point of Sale (POS) locations to flash the mobile terminal. RJ-230 Soldering Jig This jig serves as a holder for PWB component de-soldering and soldering. ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
9. SW-UPDATE Flash concept – (Point of Sales) Please follow the service manual to update software. Check always for the latest version of flash software, which is available on NOKIA Online. For instructions, see the Care Suite User Guide. ISSUE 1 Confidential Copyright @ 2008 NOKIA.
A-Cover. 3) Remove the A-Cover. 4) Separate the keymat. 5) Remove the earpiece speaker by lifting with dental tool. 6) Remove 6 ea. #5+ TORX screws. ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
Page 13
9) Lift and remove the antenna assy. Using the SS-93. 10) Lift and remove the IHF speaker using the SS-93. 11) Push out and remove Mylar film. 12) Using SS-93 carefully lift LCD. ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
Page 14
15) Carefully lift edge of key dome with dental tool. 16) Peel back and remove key dome from engine module. Note: To assemble the mobile terminal, follow the “Disassembly Instructions” in reverse order. ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.
1508i RM 430 Service Manual Level 1&2 11. ASSEMBLY HINTS Screw order for Assembly Torques Information Related to above picture: 19.6 Ncm ISSUE 1 Confidential Copyright @ 2008 NOKIA. All rights reserved.