Table of Contents
Advertisement
Configuring Network Settings
9. If desired, enable or disable Hide NAT.
See Enabling/Disabling Hide NAT on page 112.
10. If desired, configure a DHCP server.
See Configuring a DHCP Server on page 113.
11. Click Apply.
A warning message appears.
12. Click OK.
A success message appears.
13. Click Network in the main menu, and click the Ports tab.
The Ports page appears.
14. In the DMZ/WAN2 drop-down list, select VLAN Trunk.
15. Click Apply.
The DMZ/WAN2 port now operates as a VLAN Trunk port. In this mode, it will not accept untagged
packets.
16. Configure a VLAN trunk (802.1Q) port on the VLAN-aware switch, according to the vendor
instructions. Define the same VLAN IDs on the switch.
17. Connect the IP60 appliance's DMZ/WAN2 port to the VLAN-aware switch's VLAN trunk port.
132
Nokia IP60 Security Appliance User Guide
Advertisement
Table of Contents
Troubleshooting
