Private Communication Systems Mobile Phones 1Table of Contents 1 TABLE OF CONTENTS............................2 1 TECHNICAL DATA S11............................2 2 GENERAL INFORMATION..........................3 3 MECHANICAL CONCEPT..........................3 3.1 S11 M ...........................4 ECHANICAL RAWING 3.2 D S11 ..........................6 ISASSEMBLING THE 3.3 A S11.............................7 SSEMBLING THE 3.4 H .............................8...
Mobile Phones 2General Information After the S6 PCN and the S6 Power PCN, the S11 is the third model of the new handset generation for GSM-1800 in 3 Volt technology. Mechanically and technically it is very similar to the S10.
Private Communication Systems Mobile Phones The keypad (1020), the loudspeaker (1120), the microphone (1110), the dust protection frame (1190) and the microphone gasket (1220) are mounted into the upper case shell (1030). Make sure that the microphone contacts are properly bent up when mounting.
Page 5
Private Communication Systems Mobile Phones V1.1 PN MP ST D. Schnoor 04/98...
Remove Figure 1: Mechanical Drawing S11 battery and SIM-Card-Reader (1160). 2. Unscrew antenna (1130). 3. Unscrew 4 short flat head screws (1080) from battery compartment. 4. Lift off lower case (1040) from upper case.
9. Lift off keypad (1020) and earphone capsule (1120) from upper case (1030). 10. Remove microphone (1110) and microphone gasket (1220). 3.3Assembling the S11 ESD regulations have to be followed! 1. Insert microphone (1110), microphone gasket (1220) and earphone capsule (1120) into upper case shell (1030).
8. Screw in Antenna (1130) (Torque 25 Ncm). 9. Insert SIM-Card-Holder (1160) and battery. 3.4Handset Datecodes Siemens is using the industrial standard DIN EN 60062 to indicate the production / service dates. The code is printed on the IMEI sticker located under the simcard reader.
Private Communication Systems Mobile Phones The first character of the datecode indicates the year of production: F = 1995 H = 1996 J = 1997 K = 1998 The second character indicates the month of production: 1-9 = January to September O = October = November = December...
Page 10
Private Communication Systems Mobile Phones HiGOLD (PMB 2800) V1.1 PN MP ST D. Schnoor 04/98...
Private Communication Systems Mobile Phones 4.2Hardware Description The S11 handset consists of five major integrated circuits: 1) HiGOLD (PMB 2800) This IC is a combination of microprocessor and signalprocessor. The microprocessor is responsible for controlling the keyboard, SIM-Card, EEPROM, Flash and RAM.
Charging On (to µP) (from µP) From the 3.6 V battery voltage, all other supply voltages of the S11 are derived, controlled by the power supply ASIC. The VCC_DD voltage is used to supply external accessories through the bottom connector.
250 mA. Otherwise a 0.25 A fuse will blow. 5Software programming The software of the S11 handsets is programmed directly from a PC using the bootadapter (see drawing below). V1.1 PN MP ST D.
Private Communication Systems Mobile Phones Bootadapter RS-232 Connection Cable AC-Adapter 5.1Description of software booting Connect COM-port of PC with bootadapter using the enclosed RS232 cable. Afterwards plug in AC-Adapter, if connected correctly the „Power“ lamp will be active. Switch off handset and connect it to the bootadapter with the connection cable. Copy bootsoftware to your PC and follow the instructions in the „readme.txt“.
Private Communication Systems Mobile Phones Up to this moment, only three language groups for S11 are defined: Language Display Languages Group German, English, French, Italian, Dutch, Polish English, Danish, Finnish, Swedish, Norwegian, Russian English, Chinese (simplified), Chinese (traditional) Attention: This information is subject to change! Contact your service manager for the latest update and ordering numbers.
The unblocking code is derived from the IMEI number and can only be calculated by our hotline personell in Germany. If you need unblocking codes just send a fax with the IMEI numbers to: Siemens AG PN KE SH World Service Center...
Private Communication Systems Mobile Phones 7.1Specification The S11 battery is a Lithium-Ion type with a voltage of 3.6 Volts and a capacity of 1800 mAh. The connections BATT+ and GND are used to supply the mobile, while RCODE is used to detect the battery technology. BATT_TEMP is used to measure the battery temperature.
Private Communication Systems Mobile Phones * Plug the battery into the desktop charger. * Connect the battery to your travel charger 7.3Deep Discharge If the battery is deeply discharged it can be recharged by the following procedure: Insert flat battery into handset and connect travel charger. The charging symbol will not be visible.