Audio Outputs And Microphones - Cisco EX60 Administrator's Manual
Telepresence system
Hide thumbs
Also See for EX60:
- Administrator's manual (134 pages) ,
- User manual (75 pages) ,
- Installation manual (6 pages)
Table of Contents
Advertisement
Cisco TelePresence System EX Series
Contents
Audio outputs and microphones
The EX90/EX60 offers the choice of the following audio
outputs:
•
Built-in loudspeaker
•
Headset (wired)
•
Bluetooth headset (wireless)
•
Handset on Touch controller
Available microphone options depends on the chosen audio
output.
Microphone input / external microphone
The microphone input at the rear of the video system may be
used only for one of the following options:
•
Headset microphone
•
Cisco TelePresence Table microphone 20
(external microphone)
other microphone types are not supported.
note that the video system's internal microphone is disabled
when a headset microphone or an external microphone is
connected.
Headset output / external loudspeakers
The headset output is for headsets only. you should not
connect external loudspeakers to the headset output.
* The
Settings
menu can be accessed from the drop down window
that appears when you tap the contact information in the upper, left
corner of the Touch controller.
** Depending on how your system is set up, the
setting may be in the
Administrator
menu or not. note that you
have to log in with an administrator user name and password to get
access to the
Administrator
menu.
D14726.14 EX Series Administrator Guide TC7.1, APRIL 2014.
Introduction
Web interface
Choosing audio output and microphone
To select an audio output, tap the
(
/
/
/
Handset.
Speaker
As a default, the built-in loudspeaker is used
together with the internal microphone.
If an external microphone is connected, the
internal microphone is disabled and the external
microphone will be used instead.
Headset (wired)
Connect the headset to the headset output at the
rear of the system. If the headset has an in-built
microphone, connect it to the microphone input.
If the headset comes without a microphone,
either the internal microphone or, if connected,
the external microphone is used.
If you have connected both a wired headset and a
Bluetooth headset, only the Bluetooth headset will
be available in the selector.
Bluetooth headset (wireless)
Use the Touch controller to pair the headset with
the video system (open the
choose
set-up the connection).
The headset's microphone will be used.
Handset
The handset is automatically selected when you
lift it off the hook.
Bluetooth Headset
only the microphone in the handset is enabled.
neither the internal microphone nor an external
microphone can be used.
System settings
Audio output selector
)
and choose Speaker, Headset, Bluetooth or
Settings
menu and
*
(Administrator >) Bluetooth Headset
**
117
Setting passwords
note that only the available options are shown, i.e. if you have
not connected a headset (neither wired nor wireless), and
you have not lifted the handset off the hook, only Speaker is
present in the selector.
Touch controller with
handset
Audio connectors
on the rear side
and
Internal microphone
Built-in loudspeaker
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Appendices
Hide quick links:
Advertisement
Chapters
Table of Contents
