Related Manuals for Electrolux XDEX75NZHS
Summary of Contents for Electrolux XDEX75NZHS
-
Page 1: Tumble Dryer
User Manual Tumble Dryer MODEL TYPES: XDEX75NZHS XDEX76NZHS Manufactured by Electrolux Home Products, NA 137212000B (0910) -
Page 2: Table Of Contents
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance. -
Page 3: Important Safety Information
Important Safety Information In the interest of your safety and to ensure the correct use, before installing and fi rst using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is impor- tant to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. -
Page 4: Description Of The Appliance
Important Safety Information, continued • Never use the tumble dryer if the power supply cable, the • This appliance is designed for domestic use. It must not control panel, the working surface or the base are damaged be used for purposes other than those for which it was so that the inside of the tumble dryer is accessible. -
Page 5: Control Panel And Functions
Control Panel Information Henceforth, the programme selector dial, the display, the different buttons and the door pilot light will be indicated in all the book with the relevant numbers given in this picture. Programme Selector Dial The programme selector dial allows to select a drying programme. It can be turned either and Programme Indicator clockwise or anticlockwise. -
Page 6: Programme Table
Control Panel, continued By pressing this button you can select one of the following options: • SHRINK GUARD: Select Shrink Guard to lower the initial drying temperature to protect fabrics from overdrying. • EXTENDED TUMBLE: Select Extended Tumble if the dried load might not be removed promptly at the end of the cycle. -
Page 7: Drying Hints
Programme Table, continued Drying Programmes / Factory Preset Levels and Options Available Available Available Load Capacity / Type of Laundry Temperatures Dryness Levels Options PERM PRESS (Programme duration approximately 40 minutes) High Normal Dry Shrink Guard Temperature: Medium Medium Less Dry Extended Tumble Dryness Level: Normal Dry Damp Dry... -
Page 8: Before The First Use
Drying Hints, continued Make sure that no metal objects are left in the laundry (e.g. hair Laundry weights clips, safety pins, pins). The following weights are indicative: Button up pillowcases, close zip fasteners, hooks and pop- bathrobe 1200 g pers. Tie any belts or long tapes. napkin 100 g Remove persistent stains before washing. -
Page 9: Operating Sequence
Operating Sequence for Auto Dry cycles or the actual drying time for Timed Dry 1. Check that the lint fi lter is cycles will be displayed. A suitable drying temperature, clean and in place. dryness level and options will automatically be indicated for the cycle selected. -
Page 10: What To Do If
What to do if... IMPORTANT! Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engi- neer. Before contacting your local Service Centre, please carry out the checks listed below. During appliance operation it is possible that few acoustic signals sound to indicate that the appliance is not working. -
Page 11: Technical Data
Technical data Electrical connection information Information on the electrical connection is given on the rating plate above the appliance door opening. Voltage [V] 230-240, single phase [50 Hz] 220-230, single phase [60 Hz] Connected load 4500 watts Maximum dry load Cotton 10 kg Synthetics... -
Page 12: Installation Instruction
Installation Positioning Venting It is recommended that, for your convenience, the machine is Whilst drying, the tumble dryer will expel a certain amount positioned close to your washing machine. of warm, very moist air, and this should be removed from the room as quickly as possible to prevent condensation. - Page 13 Venting, continued Exceeding the length of duct pipe or number of elbows Do not screen the exhaust ends of the vent system, or use allowed in the “MAXIMUM LENGTH” chart can cause an ac- any screws, rivets or other fasteners that extend into the duct cumulation of lint in the exhaust system.
- Page 14 Electrical connection This machine is designed to operate on a 230-240 V or 220- 230 V, single phase, 50 or 60 Hz (depending on country of Access cover screw fi nal destination). Check that your domestic electrical installa- tion can take the maximum load required (4,5 Kw) also taking Terminal block into account any other appliances in use.
- Page 15 4. Remove the strain relief cap nut (7) and thread the dryer Access cover screw power cord through it. 5. Continue threading the power supply cord through the Terminal block strain relief below the terminal access, temporarily leaving the cap nut loose at this time. Neutral (“N”...
-
Page 16: Environmental Concerns
General Installation IMPORTANT: 1. Connect the exhaust duct to the outside exhaust system. Be sure the power is off at a circuit breaker/fuse box before Use of a 100 cm clamp plugging the power cord into an outlet. is recommended to connect the dryer to the exhaust vent sys- 3. -
Page 17: Warranty
DUE TO CAUSES BEYOND OUR CONTROL. THE SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE LIMITED TO THE REPLACEMENT OF PARTS AS HEREINBEFORE PROVIDED. and maintenance in accordance with instructions in the user's manual for the appliance. ELECTROLUX INTERNATIONAL COMPANY ID09-816A PITTSBURGH, PA 15220, U.S.A. -
Page 18: Notes
Notes...