Advertisement
Available languages
Available languages
Do NOT hold the antenna when the radio is "IN USE." Holding the
antenna affects its effective range.
®
Body-Worn Operation
To maintain compliances with RF exposure regulatory guidelines, if you
wear a radio on your body when transmitting always place the radio in a
Two-Way Radio
Motorola-supplied or approved clip holder, holster, case or body harness
User's Guide
for this product. Use of non-Motorola-approved accessories may exceed
RF exposure regulatory guidelines.
If you do not use one of the Motorola-supplied or approved body-worn
accessories and are not using the radio held in the normal use position,
ensure the radio and its antenna are at least 1 inch ( 2.5 cm) from your
body when transmitting.
Data Operation
If applicable, when using any data feature of the radio with or without an
accessory cable, position the radio and its antenna at least one inch
( 2.5 cm) from the body.
Approved Accessories
For a list of approved Motorola accessories, visit our Web site at
www.motorola.com.
Electromagnetic Interference/Compatibility
Note: Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, designed or otherwise
configured for electromagnetic compatibility. This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including
KEM-ML36100-09B
MR Series
interference that may cause undesired operation.
IC Canada
The term "IC:" before the equipment certification number only signifies
that the Industry Canada technical specifications were met.
Facilities
For More Information
To avoid electromagnetic interference and/or compatibility conflicts, turn
For further information, you may contact Motorola as follows:
off your radio in any facility where posted notices instruct you to do so.
USA and Canada: Call 1-800-638-5119, send e-mail to
Hospitals or health care facilities may be using equipment that is
giant@callcenter.com or visit www.motorola.com.
sensitive to external RF energy.
Mexico: Call 01-800-021-0000.
Aircraft
Uruguay: Call 00-04-01-78-70-11.
When instructed to do so, turn off your radio when onboard an aircraft.
Panama: Call 507-340-0293.
Any use of a radio must be in accordance with applicable regulations
per airline crew instructions.
NT TELECOM LIMITED
Safety and General Information
Medical Devices – Pacemakers
mer : Giant International Limited
The Advanced Medical Technology Association recommends that a
Important Information on Safe and Efficient Operation
minimum separation of 6 inches (15 cm) be maintained between a
Number : MR350 series
Read This Information Before Using Your Radio.
handheld wireless radio and a pacemaker. These recommendations are
The information provided in this document supersedes the general safety
consistent with the independent research by and recommendations of
ption : LCD and Radio Line Drawing for User Guide
information in user guides published prior to December 1, 2002.
the U.S. Food and Drug Administration.
n : R01
Transmit and Receive Procedure
People with pacemakers should:
July 11, 2012
Your two-way radio contains a transmitter and a receiver. To control your
•
ALWAYS keep the radio more than 6 inches (15 cm) from their
exposure and ensure compliance with the general population/
pacemaker when the radio is turned ON.
uncontrolled environment exposure limits, always adhere to the following
•
Not carry the radio in the breast pocket.
procedure:
•
Use the ear opposite the pacemaker to minimize the potential for
•
Transmit no more than 50% of the time.
interference.
•
To receive calls, release the PTT button.
•
Turn the radio OFF immediately if there is any reason to suspect that
•
To transmit (talk), press the Push to Talk (PTT) button.
interference is taking place.
Transmitting 50% of the time, or less, is important because the radio
Medical Devices – Hearing Aids
generates measurable RF energy exposure only when transmitting (in
Some digital wireless radios may interfere with some hearing aids. In the
terms of measuring standards compliance).
event of such interference, you may want to consult your hearing aid
manufacturer to discuss alternatives.
Exposure to Radio Frequency Energy
Your Motorola two-way radio complies with the following RF energy
Medical Devices – Other
exposure standards and guidelines:
If you use any other personal medical device, consult the manufacturer
•
United States Federal Communications Commission, Code of Federal
of your device to determine if it is adequately shielded from RF energy.
Your physician may be able to assist you in obtaining this information.
Regulations; 47CFR part 2 sub-part J.
Safety and General Use While Driving
•
American National Standards Institute (ANSI)/Institute of Electrical
and Electronic Engineers (IEEE) C95. 1-1992.
Check the laws and regulations regarding the use of radios in the area
where you drive, and always obey them. If you do use your radio while
•
Institute of Electrical and Electronics Engineers (IEEE) C95.
driving, please:
1-1999 Edition.
•
Give full attention to driving and to the road.
•
International Commission on Non-Ionizing Radiation Protection
(ICNIRP) 1998.
•
Use hands-free operation, if available.
•
Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure
•
Pull off the road and park before making or answering a call if driving
to Radiofrequency Electromagnetic Fields in the Frequency Range
conditions so require.
from 3 KHz to 300 GHz, 1999.
The use of a two-way radio while engaged in activities requiring
•
Australian Communications Authority Radiocommunications
concentration may cause distraction or otherwise impair your ability to
(Electromagnetic Radiation—Human Exposure) Standard, 2003.
safely participate in such activities. Always use technology safely.
•
ANATEL ANNEX to Resolution No. 303 of July 2, 2002.
Do not place a portable radio in the area over an air bag or in the air bag
•
ANATEL ANNEX to Resolution No. 533 of September 10, 2009.
deployment area. Air bags inflate with great force. If a portable radio is
placed in the air bag deployment area and the air bag inflates, the radio
To ensure optimal radio performance and make sure human exposure to
may be propelled with great force and cause serious injury to occupants
radio frequency electromagnetic energy is within the guidelines set forth
of the vehicle.
in the above standards, always adhere to the following procedures.
Potentially Explosive Atmospheres
Portable Radio Operation and EME Exposure
Turn off your radio prior to entering any area with a potentially explosive
Antenna Care
atmosphere. Only radio types that are especially qualified should be
Use only the supplied or an approved replacement antenna.
used in such areas as "Intrinsically Safe." Do not remove, install or
Unauthorized antennas, modifications, or attachments could damage the
charge batteries in such areas. Sparks in a potentially explosive
radio and may violate FCC regulations.
atmosphere can cause an explosion or fire resulting in bodily injury or
even death.
Note: The areas with potentially explosive atmospheres referred to
Channels and Frequencies
above include fueling areas such as below decks on boats, fuel or
chemical transfer or storage facilities, areas where the air contains
Channel Frequency
chemicals or particles (such as grain, dust or metal powders) and any
other area where you would normally be advised to turn off your vehicle
1
462.5625 MHz
engine. Areas with potentially explosive atmospheres are often—but not
always—posted.
2
462.5875 MHz
Blasting Caps and Areas
3
462.6125 MHz
To avoid possible interference with blasting operations, turn off your
radio when you are near electrical blasting caps, in a blasting area, or in
4
462.6375 MHz
areas posted "Turn off two-way radios." Obey all signs and instructions.
Operational Cautions
5
462.6625 MHz
Antennas
6
462.6875 MHz
Do not use any portable radio that has a damaged antenna. If a
damaged antenna comes into contact with your skin, a minor burn can
7
462.7125 MHz
result.
8
467.5625 MHz
Batteries
All batteries can cause property damage and/or bodily injury such as burns
9
467.5875 MHz
if a conductive material—like jewelry, keys or beaded chains— touch
exposed terminals. The conductive material may complete an electrical
10
467.6125 MHz
circuit (short circuit) and become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside a pocket, purse or other
11
467.6375 MHz
container with metal objects.
Mexico
Exercise care when removing NiMH or AA batteries. Do not use sharp or
conductive tools to remove either of these batteries.
Use of GMRS frequencies is subject to the Rules and Regulations of the
Secretary of Communications and Transport (SCT) and Federal
Battery Charger Safety Instructions:
Telecommunications Commissions (COFETEL). SCT/COFETEL requires
Save these Instructions
that all operators using GMRS frequencies obtain a permit before
1. Do not expose the charger to rain or snow.
operating their equipment. To obtain a permit from the SCT, the user
must proceed in accordance with Articles 14 and 15 of the Federal
2. Do not operate or disassemble the charger if it has received a sharp
Telecommunications Law. Consult your local SCT/COFETEL office for
blow, or has been dropped or damaged in any way.
more information: www.sct.gob.mx./www.cft.gob.mx.
3. Never alter the AC cord or plug provided with the unit. If the plug will
not fit the outlet, have the proper outlet installed by a qualified
Uruguay
electrician. An improper condition can result in a risk of electric
Use of GMRS frequencies is subject to the Rules and Regulations of the
shock.
Regulatory Unit Communications Services (URSEC). URSEC requires
that all operators using GMRS frequencies obtain a permit before
4. To reduce the risk of damage to the cord or plug, pull the plug rather
operating their equipment. The authorization shall depend on the
than the cord when disconnecting the charger from the AC
channel availability at the time the authorization is requested. To obtain
receptacle.
a permit from URSEC, consult your local URSEC office for more
5. To reduce the risk of electric shock, unplug the charger from the
information: www.ursec.gub.uy.
outlet before attempting any maintenance or cleaning.
MR350 Radio line drawing with point lines
Panama
6. Use of an attachment not recommended or sold by Motorola may
The Republic of Panama does not require authorization to use
result in a risk of fire, electric shock or personal injury.
FRS/GMRS radio equipment frequencies.
7. Make sure the cord is located so it will not be stepped on, tripped
over or subjected to damage or stress.
USA
8. An extension cord should not be used unless absolutely necessary.
Use of GMRS frequencies is subject to the Rules and Regulations of
Use of an improper extension cord could result in a risk of a fire
the Federal Communications Commission (FCC). The FCC requires that
and/or electric shock. If an extension cord must be used, make sure
all operators using GMRS frequencies obtain a radio license before
that:
operating their equipment. To obtain the FCC forms, please visit the
FCC's Web site at wireless.fcc.gov/uls/index.htm?job=home to source
•
The pins on the plug of the extension cord are the same number,
form 605 and 159, which include all the instructions you will need.
size and shape as those on the plug of the charger.
•
The extension cord is properly wired and in good condition.
If you wish to have the document faxed or mailed, or if you have
questions, please use the following contact information:
•
The extension cord size is 18 AWG for lengths up to 100 feet, and
16 AWG for lengths up to 150 feet.
For a fax:
9. The supply cord of the AC adaptor cannot be replaced. If the cord is
Contact the
damaged, call customer service at the appropriate number listed in
Fax-0n-Demand
the Warranty section.
system
Changes or modifications, not expressly approved by Motorola, may void
1-202-418-0177
the user's authority granted by the local regulatory agency to operate
this radio and should not be made. To comply with local regulatory
requirements, transmitter adjustments should be made only by or under
GIANT TELECOM LIMITED
Canada
the supervision of a person certified as technically qualified to perform
Customer : Giant International Limited
No license is required in Canada for GMRS use.
Model Number : MR350 series
transmitter maintenance and repairs in the private land mobile and fixed
Description : LCD and Radio Line Drawing for User Guide
services as certified by an organization representative of the user of
Version : R01
Date : July 11, 2012
those services. Replacement of any transmitter component (crystal,
semiconductor, etc.) not authorized by the local agency's equipment
authorization for this radio could violate local government regulatory rules.
Note:
Volume
• Use of this outside the country where it was intended to be distributed
is subject to government regulations and may be prohibited.
Licensing Information
Push-to-Talk
( High)
Your Motorola radio has 22 operating channels. The FRS channels
Push-to-Talk
operate within the range of free use frequencies and do not require
( Low)
authorization from your local regulatory body.
The GMRS channels may require authorization from your local
Microphone
regulatory body.
Call Tone
MR350 LCD LINE ART
Scroll/Weather
Mini-USB
Charging Port
Display Screen Guide
Description Channel
Frequency
Description
GMRS
12
467.6625 MHz
FRS
Numbers for Channel,
GMRS
13
467.6875 MHz
FRS
Call Tone
GMRS
14
467.7125 MHz
FRS
Numbers for Codes
GMRS
15
462.5500 MHz
GMRS
GMRS
16
462.5750 MHz
GMRS
— Battery Meter
GMRS
17
462.6000 MHz
GMRS
— Channel Power
Indicator
GMRS
18
462.6250 MHz
GMRS
(see Menu Options)
FRS
19
462.6500 MHz
GMRS
— Lock
FRS
20
462.6750 MHz
GMRS
— Talk Confirmation
Tone (Roger Beep)
FRS
21
462.7000 MHz
GMRS
— Noise Filtering
FRS
22
462.7250 MHz
GMRS
— On/Off for each
feature
Getting Started
Installing the Batteries
Each radio can use either 1 NiMH rechargeable battery pack or 3 AA
alkaline batteries and beeps when the batteries are low.
Installing NiMH Rechargeable Battery Pack ( Optional Accessory)
1. Turn the radio off.
2. With the back of the radio facing you, lift the battery cover latch up
and remove the cover.
3. Remove the NiMH battery pack from the clear plastic bag. (Do not
disassemble or unwrap the battery pack.)
4. Insert the NiMH battery pack with the diagram facing you. (The
ribbon should be underneath the battery pack and should wrap
around the right side of the pack for easy removal.)
5. Reposition the battery cover and press down to secure.
Installing the Three AA Alkaline Batteries
1. Turn the radio off.
2. With the back of the radio facing you, lift the battery cover latch up
and remove the cover.
3. Insert the three AA alkaline batteries with + and - polarity as shown
inside. (The ribbon should be underneath the AA alkaline batteries
and should wrap around the right side of the batteries.)
4. Reposition the battery cover and press down to secure.
Radio Battery Meter
The radio battery icon shows the battery charge level, from full
For mail service:
If you have
empty
. When the radio has one segment left, the
Call the FCC
questions about
radio chirps periodically or after releasing
Forms Hotline
the FCC License:
Removing the NiMH Battery Pack ( Optional Accessory)
Call the FCC
1. Turn the radio off.
1-800-418-FORM
1-888-CALL-FCC
2. With the back of the radio facing you, lift the battery latch up to
(3676)
(225-5322)
release the battery cover and remove the cover.
3. Remove the NiMH battery pack by pulling the ribbon attached to
MR350 Radio line drawing with point lines
the radio.
4. Reposition the battery cover and press down to secure.
Control Buttons
Removing the Three AA Alkaline Batteries
1. Turn the radio off.
2. With the back of the radio facing you, lift the battery latch up to
release the battery cover and remove the cover.
3. Gently remove each alkaline battery by easing each battery out
individually.
Emergency Alert
4. Reposition the battery cover and press down to secure.
Notes
LED Indicator
•
Exercise care when removing NiMH or AA batteries. Do not use
sharp or conductive tools to remove either of these batteries.
•
Remove the batteries before storing your radio for extended periods
of time. Batteries corrode over time and may cause permanent
Accessory Jack
damage to your radio.
Using the Battery Charger ( Optional Accessory)
Flashlight Button
The battery charger provides drop-in charging convenience for NiMH
batteries and can be placed on any flat surface, such as a desk or
workbench. Charge the NiMH battery overnight (at least 16 hours) before
Scan/Monitor
using it for the first time. After the initial charge, an empty battery is fully
charged within 14 hours.
Menu/Lock
1. Follow the steps above to install a NiMH Battery Pack.
2. Plug the AC power supply cord into the jack on the desk stand.
3. Plug the AC power supply into a standard wall outlet.
4. With a radio facing forward, slide it into one of the charging pockets.
Flashlight LED
MR350 Radio line drawing
5. When charging in the battery charger, the red light on the charger
MR350 / MR355 LCD LINE ART
base will glow continuously.
Using the mini-USB Charging Connector
The mini-USB charging connector is a handy port that allows you to
conveniently charge your NiMH battery pack. This is an alternative to
charging your NiMH battery pack in the Battery Charger desk stand
using the AC wall adaptor and especially useful when used while
traveling.
Available mini-USB charging options (Optional Accessories):
1. Wall travel charger
2. Vehicle charger
3. Mini-USB computer cable
— Scan
If using a computer, the computer must be turned on.
— Vibrate
This and other accessories (sold separately) are available for your radio.
For more information, visit our Web site at www.motorola.com.
— Call Tone,
Keypad Tone
1. Plug your mini-USB cable or charger into a power source as is
appropriate for your accessory.
— Weather Alert
2. Plug the cable into the mini-USB port on the bottom of your radio.
— Hands-Free Use
3. An empty battery will be fully charged in 14 hours.
Without
4. The LED indicator light on the radio will glow to indicate that the
Accessories
battery is charging.
— Hands-Free Use
Notes
With Accessories
•
The light will remain red after the NiMH battery pack is fully charged.
•
When moving between hot and cold temperatures, do not charge the
NiMH battery pack until the battery temperature acclimates (usually
about 20 minutes).
•
For optimal battery life, remove the radio from the charger within 16
hours. Do not store the radio while connected to the charger.
•
If the radio is kept on while charging, the charging time will be
extended.
•
Even though the charger is connected, you may not be able to
transmit a message if the battery is completely empty
time for the battery to charge to 1 bar
before attempting to
transmit a message.
Attaching and Removing the Belt Clip
1. Attach belt clip to pocket or belt strap.
2. Align the belt clip post with the hole in the back of the radio.
3. Gently push until the clip clicks in place.
To Remove
1. Push down on the release tab at the top of the belt clip to release
the catch.
2. Pull the belt clip away from the back of the radio.
Turning your Radio On and Off
Turn
clockwise to turn the radio on and counterclockwise to turn the
radio off.
1. In the ON position, the radio chirps and briefly shows all feature
icons available on the radio.
2. The display screen then shows the current channel, code and all
features that are enabled.
Setting the Volume
to
Press and hold
for three seconds while rotating
comfortable listening level.
(Low Battery Alert).
1. Rotate
clockwise to increase the volume.
2. Rotate
counterclockwise to decrease the volume.
Do not hold the radio close to your ear. If the volume is set to an
uncomfortable level, it could hurt your ear.
Talking and Listening
To communicate, all radios in your group must be set to the same
channel and Interference Eliminator Code.
1. To talk, press and hold
.
2. When you are finished talking, release
.
For maximum clarity, hold the radio two to three inches away from your
mouth and speak directly into the microphone. Do not cover the
microphone while talking.
Talk Range
Your radio is designed to maximize performance and improve
transmission range. Do not use the radios closer than five feet apart.
Power Boost
To boost your radio's power up to high power, press the top portion of the
button when talking. If you know your party is close by, you can
conserve your battery's energy by pushing the lower part of the
button to use less power.
Note: If you are on an FRS only channel (see Channels and Frequencies
table) the radio will only use low power when either portion of the
is pressed.
. Allow
until you reach a
MR Series
Advertisement
Related Manuals for Motorola TalkAbout MR Series
Summary of Contents for Motorola TalkAbout MR Series
- Page 1 GMRS 467.7125 MHz To avoid possible interference with blasting operations, turn off your If you do not use one of the Motorola-supplied or approved body-worn Numbers for Codes Available mini-USB charging options (Optional Accessories): radio when you are near electrical blasting caps, in a blasting area, or in accessories and are not using the radio held in the normal use position, 462.6375 MHz...
-
Page 2: Special Features
Eliminator Codes. Codes 1 – 38 are the standard analog codes that with other Motorola radios that have this feature. This feature filters out Tone and the LED Indicator will extinguish. Operation then returns to Canada Weatheradio. -
Page 3: Primeros Pasos
Cada radio utiliza 1 batería recargable NiMH o 3 baterías alcalinas AA y 4. La luz indicadora LED del radio se ilumina para indicar que la batería o suministrados por Motorola, y no está usando el radio en la posición de uso SCT/COFETEL exige que todos los operadores de frecuencias GMRS emite un sonido de alerta cuando las baterías están bajas. -
Page 4: Receptor De Clima
Esta garantía se ofrece sólo al primer comprador consumidor y no Nota: Todos los radios Serie EM, MJ y MR de Motorola Talkabout son debe salir del escaneo y configurar el código detectado en el canal.