Ip Ospf Priority; Ip Ospf Retransmit-Interval - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

ip ospf priority

To determine the designated router for the OSPF network, set the priority of the interface.

ip ospf priority number

To return to the default setting, use the no ip ospf priority command.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Setting a priority of 0 makes the router ineligible for election as a designated router

or backup designated router.

Use this command for interfaces connected to multi-access networks, not point-

to-point networks.

Set the retransmission time between lost link state advertisements (LSAs) for adjacencies belonging to the

ip ospf retransmit-interval seconds

Enter a number as the priority. The range is from 0 to 255.

The default is 1.

Introduced on the Z9500.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

Open Shortest Path First (OSPFv2 and OSPFv3)