Table of Contents
Advertisement
1. With a small flat-blade screwdriver, unlock the
tabs and remove the assembly.
2. Remove the thermistor from the cover and
disconnect the wire connector.
Temperature Control Panel
The temperature control panel is located in the
fresh food compartment and mounted at the upper
front. This panel allows temperature control for the
fresh food and freezer compartments. Each
compartment has an LED readout of the
temperature setting. In addition the panel has an
LED readout for water filter change.
1. Remove the control panel Phillips head
mounting screws (3).
2. Pull the panel down until the wire connections
are exposed.
4. Disconnect the panel wire connector.
5. Disconnect the circuit card ribbon.
6. Unlock the card locking tabs located at the
lower left- and right-hand corners of the card.
7. Remove the card.
Screws
Screws
Screws
GEA00940
Freezer Door Bins
The freezer door bins are located on the inside of
the freezer door and tilt out to allow easy access
of frozen items.
1. Tilt the bin up and slide it out of the door.
Doors and Door Hinges
IMPORTANT: The freezer door is not adjustable.
The fresh food door can be adjusted up and down
to match the height of the freezer door. Adjust the
fresh food door up or down using the hinge
adjustment pin (located on the fresh food door
lower hinge).
IMPORTANT: The refrigerator rollers must be
adjusted correctly to ensure proper door closure.
Refer to the Roller Adjustment section in this
chapter for more information.
1. Remove the base grille.
2. With the door in the closed position,
disconnect the wiring harness connector.
3. Disconnect the water supply tube. To
disconnect the tube, push the white collar on
the quick connector in and pull the tube out.
– 22 –
GEA00942
GEA00943
- Quick Links:
- Diagnostic Tests (Table 2)
- Self Diagnostics
Hide quick links:
Advertisement
Chapters
Table of Contents
