LICENSE LICENSE Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX is a digital video format created ®...
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Safety precautions are given in two forms, i.e. Warning and Caution as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product.
Page 4
SAFETY INSTRUCTIONS Read these instructions. Do not install the product onto a wall Keep these instructions. or ceiling that is close to sources of Heed all warnings. oil or oil mist. Follow all instructions. - The product may be damaged and fall, resulting in serious injury.
Page 5
SAFETY INSTRUCTIONS Power CAUTION When placing the projector on a table WARNING or shelf, be careful not to put it near The appliance coupler is used as the the edge. disconnect device. Please make sure - The projector could fall due to the device is installed near the wall balance problems, which may outlet to which it is connected and...
Page 6
- This may result in electric shock. - A damaged wire may create a fire Only use the official power cord hazard. provided by LG Electronics. Do not Ensure the power cord and plug are use other power cords. not damaged, modified, severely...
Page 7
SAFETY INSTRUCTIONS Make sure that a child does not When you play a game by connecting swallow the batteries when you a game console to a projector, it is replace the old remote control recommended that you maintain a batteries with new ones. Keep distance of more than four times the batteries out of reach of children.
Page 8
SAFETY INSTRUCTIONS Do not drop anything onto the Use air spray, a soft cloth or a cotton projector or allow anything to bang swab moistened with a lens cleaning into the projector. chemical or alcohol to remove dust or - This may cause damage to the stains on the front projection lens.
Page 9
SAFETY INSTRUCTIONS ANTENNA Do not stare directly into lens when in operation, eye damage can occur. If you are using an outdoor antenna, No user serviceable parts inside unit. please install it away from electrical High voltage parts can cause shock wires to make sure it does not touch and even electrocution.
Page 10
- This may result in fire or explosion due to damage to the battery. Always use batteries approved and certified by LG Electronics. - This will prevent damage or fire. Store batteries away from metallic objects, such as keys and paper clips.
CONTENTS CONTENTS LICENSE ENTERTAINMENT Using SCREEN SHARE SAFETY INSTRUCTIONS MY MEDIA PREPARATION Before Using - Connecting a USB Device Accessories - Removing a USB Device Optional Extras To Use My Media Parts and Components - Watching the Videos Installation - Viewing the Photos - Installation Precautions - Listening to Music - Projection Distance per Screen Size...
Page 12
CONTENTS CONNECTING DEVICES Connecting to HD Receiver, DVD, or VCR Player, External Devices - HDMI Connection - HDMI to DVI Connection - AV Connection - Component Connection Connecting a PC - HDMI Connection - HDMI to DVI Connection - RGB Connection Connecting a Laptop - HDMI Connection Connecting to Headphones...
PREPARATION PREPARATION Accessories Accessories included with the project are show below. The pictures may differ slightly from the actual product. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. Remote Control Owner's Manual Owner's Manual CD Two AAA Batteries Computer Cable...
PREPARATION Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice. Projection Screen Tripod HDMI Cable 3D glasses Video Cable Audio Cable (DLP-LINK or DLP-...
PREPARATION Parts and Components The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright coloured dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction.
Page 16
PREPARATION (USB Port) (Headphone Port) HDMI/MHL Port ANTENNA IN Port RGB IN Port DC IN Port AV IN Port...
PREPARATION Installation Installation Precautions Do not place the projector in a hot Place the projector in a well-ventilated or humid environment. environment. - Do not place the projector in a hot, - To prevent internal heat build-up, cold, or humid environment. install the projector in a well- Do not place the projector in a place ventilated place.
PREPARATION Projection Distance per Screen Size Place the projector on a sturdy, level surface, together with the PC or audio/video source. Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen.
PREPARATION How to Install the Projector On a Tripod You can install this projector using a camera tripod. As shown below, you can mount the projector instead of a camera on the tripod. When stabilizing the tripod, we recommend using a locking bolt of standard size 4.5 mm or less.
REMOTE CONTROL REMOTE CONTROL Open the lid at the back of the remote control and insert the batteries as described in the instructions. Use new batteries and do not mix regular or rechargeable batteries. (1.5 V AAA) CAUTION y Do not mix new batteries with old ones. POWER Turns the projector on or off.
Page 21
REMOTE CONTROL SETTINGS Displays or closes the Settings menu. STILL Freezes the moving image. (Available in any mode other than USB mode.) Q.MENU Allows you to change the settings easily. Up/Down/Left/Right buttons Switches between menu functions. Shows the current mode and saves changes to the settings.
USING THE PROJECTOR USING THE NOTE PROJECTOR Ensure you use a standard coaxial cable (75 Ω, sold separately) when connecting to the projector input. Connecting the For better image quality in Antenna or Cable locations where signal strength is low, purchase and install a signal To watch TV using an indoor/outdoor amplifier (booster).
USING THE PROJECTOR Watching Projector Watching Projector In standby mode, press the POWER Turning on the Projector button to turn the projector on. Press the INPUT button and select The menu screen display in this owner's the input signal you want. manual is an example to help users Control the projector using the understand how to operate the product...
USING THE PROJECTOR To Set Programme Memorizing or Deleting Channels Manually Image shown may differ from your projector. Press the SETTINGS button. Press the , or button to select SETUP and press the OK Memorizing the Available button. Channels Press the button to select Manual Tuning and press the OK Using the Auto Tuning function...
Page 25
USING THE PROJECTOR Editing Your Programme List Favourite Programme Setup Press the SETTINGS button. Press the SETTINGS button. Press the , or button to Press the , or button to select SETUP and press the OK select SETUP and press the OK button.
USING THE PROJECTOR Additional Options Menu Description Full When projector receives the Wide wide screen signal, it will Adjusting Aspect Ratio let you adjust the picture horizontally or vertically, Select SETTINGS → PICTURE → in a linear proportion,to fill Aspect Ratio to change the aspect the entire screen fully.
USING THE PROJECTOR Using the Keystone Changing input device Function To select an external input To prevent the screen image from Selects external input. becoming trapezoidal, Keystone adjusts the top and bottom width of the image Press the INPUT button on the if the projector is not set up at a right remote control to display the input angle to the screen.
USING THE PROJECTOR Blank Function Selecting an Input Label Displays which devices are connected to Using the Blank Function which input ports. This function may be effective when you Input Label need to draw attention during a meeting ◀ ▶ or training.
USING THE PROJECTOR Using the Quick Menu You can customize frequently used menus. Press the Q.MENU button. Press the button to select a menu and press OK. Menu Description Aspect Resizes the picture. Ratio PJT Mode Turns the projected image upside down or flips it horizontally.
Windows, and some other operating systems, may not be compatible with SCREEN SHARE. Ice Cream Sandwich, Jellybean, and KitKat versions of LG’s Android devices are guaranteed to be compatible. When connecting via SCREEN SHARE, place the device close to the projector.
MY MEDIA MY MEDIA Removing a USB Device Click the Q.MENU button. Before Using Use the button to move to USB Device and press the OK button. Connecting a USB Device Select a USB to remove. Wait for Connect a USB device (external HDD, confirmation that the USB device USB memory) to the USB port of has stopped before removing the...
Page 32
MY MEDIA Tips for Using a USB Device If the USB storage device has a built- in auto recognition programme or uses its own driver, it may not work. Some USB storage devices may not work or may work incorrectly. If you use a USB extension cable, the USB device may not be recognized or may not work properly.
MY MEDIA To Use My Media Press the SETTINGS button on the remote control. Select MY MEDIA. Select desired file from the list. Watch the chosen file. Sets play related settings by checking option during disk playback. My Media supporting file Maximum data transfer rate: 20 Mbps (Mega bit per second) External supported subtitle formats:...
Page 34
MY MEDIA Video Supported Codec Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640x480 @ 30p) Extension Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profiles .asf, .wmv Audio WMA Standard, WMA 9 Professional Video DivX3.11, DivX4, DivX5, DivX6, XVID, H.264 / AVC .divx, .avi Audio...
Page 35
MY MEDIA Audio File File type Item Info Bit rate 32 kbps ~ 320 kbps Sampling rate 32 kHz ~ 48 kHz Bit rate 32 kbps ~ 640 kbps Sampling rate 32 kHz, 44.1 kHz, 48 kHz Bit rate 32 kbps ~ 448 kbps MPEG Sampling rate 32 kHz ~ 48 kHz...
MY MEDIA Watching the Videos In the Movie List, you can watch movies stored on the connected USB device. Controls playback and sets options while viewing videos. Tips for Playing Video Files Some subtitles created by users may not work properly. The video and subtitle files should be placed in the same folder.
Page 37
MY MEDIA Browsing Movie List Description Moves to the upper level folder. Play a video file stored in the connected Exit Movie List. device. Connect a USB storage device. Control playback by using the Press the SETTINGS button. following buttons. Use the , or button to...
Page 38
MY MEDIA Options for Movie List Setting Description Subtitle The subtitle can be turned Press the Q.MENU button. Language on or off. Use the button to move to Language : One of a desired option and press the OK any of the available button.
Page 39
MY MEDIA Subtitle Language Subtitle Language Language Latin1 English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan, Valencian Latin2 Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian Latin4 Estonian, Latvian, Lithuanian Cyrillic Bulgarian, Macedonian, Russian, Ukranian, Kazakh...
Page 40
MY MEDIA Registering the DivX code To deregister the DivX code Checks DivX Reg. Code for replaying Use the DivX deregistration code to DivX protected videos. Register at deactivate the DivX DRM function. http://vod.divx.com. In the Settings menu, move to Use Reg.
MY MEDIA Viewing the Photos Browsing Photo List You can view photos stored on a Connect a USB storage device. connected device. Press the SETTINGS button. Supported Photo Files Use the , or button to select MY MEDIA and press the OK PHOTO (*.JPEG) button.
Page 42
MY MEDIA Control playback by using the Setting Description following buttons. A pop-up window will Option appear. 01_a.jpg 2008/12/10 Hide Hides the menu on the 1920 x 1080 479 KB [1/4] full size screen. To see the menu, press the OK button on the remote control.
Page 43
MY MEDIA Options for Photo List Press the Q.MENU button. Use the button to move to a desired option and press the OK button. , or button to set up each item. Set Photo View. Setting Description Slide speed Selects a slideshow speed.
MY MEDIA Listening to Music Description Thumbnails You can play audio files stored on the Abnormal file connected device. Supported Music Files *.MP3 File not supported Bit rate range 32 Kbps - 320 Kbps Sampling rate MPEG1 Layer3: 32 kHz, 44.1 kHz, 48 kHz File List Moves to the upper level folder.
Page 45
MY MEDIA Options for Music List Control playback by using the following buttons. Press the Q.MENU button. Page 1/1 ꘧ Page Change Music List USB STORAGE DEVICE Use the button to move to Drive1 Page 1/1 a desired option and press the OK Butterfly_...
MY MEDIA Viewing Files Browsing File List You can see document files stored on a Connect a USB storage device. connected device. Press the SETTINGS button. Supported File Formats Use the , or button to select MY MEDIA and press the OK XLS, XLSX, DOC, DOCX, PPT, PPTX, button.
Page 47
MY MEDIA Options for File List Control playback by using the following buttons. Press the Q.MENU button. Click Go Page then the pop-up window for selecting the number , or button to set up of page appears. Input the page to each item.
3D FUNCTION 3D FUNCTION 3D technology uses different video frames for each eye to add depth to the video. While Watching 3D Do not watch 3D images near fragile objects or any objects that can be knocked over easily. WARNING Take care not to injure yourself as you may subconsciously try to move If you view 3D video or images too...
Page 49
3D FUNCTION CAUTION Warning about photosensitivity seizures Extra special care is required for - Some users may experience a children watching a 3D video. seizure or other abnormal symptoms when they are exposed to a flashing When Watching 3D Video light or particular patterns from a video Prevent children of 5 years or game.
3D FUNCTION Please check the following when You may see left and right images overlapped during projector using 3D glasses. initialization after it is powered on. It Do not use 3D glasses as ordinary may take some time for optimization. glasses, sunglasses or protective It may take some time for the 3D goggles.
3D FUNCTION Requirements for Watching 3D Images * Optimum viewing angle: Top/Bottom/Left/Right 9° Recommended viewing distance: 3 m - 5 m Recommended screen size: 101 cm * Watching 3D videos should be done in dark room environments only. NOTE The pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen.
Page 52
3D FUNCTION Please check the minimum system requirements for your computer. Minimum requirements are as follows: Microsoft® Windows® XP, Vista 32/64 bit ,Windows 7 32/64 bit Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higher More than 1 GB of system memory (2 GB recommended) Free space of 100 MB or more DirectX 9 or higher Video card should support 120 vertical frequency (Hz).
3D FUNCTION To Use DLP-LINK (DLP-Ready) Type Glasses While watching 3D images from the projector, press buttons on the glasses. When you press the button, the glasses flicker to be synchronized with the 3D images. (The flickering is a unique operation method of DLP-LINK type glasses. It may be different depending on the glasses type.) If the glasses flicker or problems occur while watching 3D, first turn the lights off to make the room darker.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETTINGS Press the SETTINGS button. button to select the desired item and press the OK button. Use the , or Use the , or button to set up the desired item and press the OK button. Press the EXIT button when completed.
CUSTOMIZING SETTINGS PICTURE Settings Press the SETTINGS button. PICTURE ꔂ Move ꔉ OK Use the , or button to select y ꕊ Energy Saving : Medium PICTURE and press the OK button. y Picture Mode : Standard Use the , or button to set up the y Contrast 100 desired item and press the OK button.
Page 56
CUSTOMIZING SETTINGS Item Description Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark. Horizontal and Vertical Sharpness are available only in Expert1/2. Colour Adjusts the intensity of all colours. Tint Adjusts the balance between red and green levels. Advanced Customizes the advanced settings.
CUSTOMIZING SETTINGS Advanced Control Item Description Dynamic Adjusts contrast and colour to the optimal level according to the Contrast screen’s brightness. Dynamic Adjusts colours for more natural-looking colours. Colour Colour Selects the range of colours that can be expressed. Gamut Standard: Displays the original colours of an input signal regardless of the display features.
Page 58
CUSTOMIZING SETTINGS Item Description Colour In Expert mode, you can customize the options of each mode. Temperature Gamma: Select 1.9, 2.2, or 2.4. a. Method: 2 Points - Pattern: Inner, Outer - Points: Low, High - Red/Green/Blue: Adjustable range -50 ~ +50. - Apply to all inputs: The values of the Colour Temperature is applied to all the input modes.
Page 59
CUSTOMIZING SETTINGS Picture Option Item Description Noise Reduction Reduces screen noise in the video. MPEG Noise Eliminates noise generated while creating digital picture signals. Reduction Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture input using the degree of darkness (black level) of the screen.
CUSTOMIZING SETTINGS AUDIO Settings Press the SETTINGS button. AUDIO ꔂ Move ꔉ OK button to select AUDIO Use the , or y Sound Mode : Standard and press the OK button. y Sound Effect Use the , or button to set up the y Auto Volume : Off DTV Audio Setting...
Page 61
The user can select various sound effects. Mode Clear Voice II Makes the voice from the projector crisp and clear. Virtual LG’s proprietary audio processing technology Surround allows 5 channel-like surround sound from two speakers. When Clear Voice II is set to on, Virtual Surround cannot be selected.
CUSTOMIZING SETTINGS SETUP Settings Press the SETTINGS button. SETUP ꔂ Move ꔉ OK Use the , or button to select y Auto Tuning SETUP and press the OK button. Manual Tuning Programme Edit Use the , or button to set up the desired item and press the OK button.
CUSTOMIZING SETTINGS TIME Settings Press the SETTINGS button. TIME ꔂ Move ꔉ OK button to select TIME Use the , or y Clock and press the OK button. y Off Time : Off y On Time : Off Use the , or button to set up the y Sleep Timer...
WIRELESS Press the SETTINGS button. ꔂ Move ꔉ OK Use the , or button to select SCREEN SHARE : [PJTR][LG][0000] WIRELESS and press the OK button. y Group y Channel Use the , or button to set up the desired item and press the OK button.
CUSTOMIZING SETTINGS LOCK Settings LOCK Press the SETTINGS button. ꔂ Move ꔉ OK button to select LOCK Use the , or y Set Password and press the OK button. y Lock System : Off Block Programme - To enter the LOCK menu, enter the preset Parental Guidance : Blocking Off 4-digit password.
Page 66
CUSTOMIZING SETTINGS Item Description Key Lock Locks control buttons on projector. Key Lock function remains intact even in case of power outage or when the power cord is removed from the wall socket. Key Lock function can only be set by remote control, and not by the button on the projector.
CUSTOMIZING SETTINGS OPTION 1 Settings OPTION 1 Press the SETTINGS button. ꔂ Move ꔉ OK Use the , or button to select y Language OPTION 1 and press the OK button. y Country : UK y Disability Assistance Use the , or button to set up the 3D Mode...
Page 68
CUSTOMIZING SETTINGS Item Description Auto Input Automatically searches for and displays the input signal type Search when it is received. It is available only with external inputs (RGB, HDMI, AV, and Component). Data Service This function allows users to choose between MHEG (Digital Teletext) and Teletext if both exist at the same time.
CUSTOMIZING SETTINGS OPTION 2 Settings OPTION 2 Press the SETTINGS button. ꔂ Move ꔉ OK Use the , or button to select y Keystone OPTION 2 and press the OK button. y Auto Keystone : On y PJT Mode : Front Use the , or button to set up the...
Page 70
CUSTOMIZING SETTINGS Item Description Auto Power Makes the projector turn on automatically when the adaptor plug is inserted. Item When the AC/DC plug is connected to the projector, it turns on automatically. When the AC/DC plug is connected to the projector, it goes into standby mode.
CONNECTING DEVICES Connecting to HD HDMI to DVI Connection Receiver, DVD, or Using an HDMI to DVI cable, connect VCR Player, External the projector's HDMI/MHL port to the DVI OUT port. Devices To output audio, use an audio cable for connection.
CONNECTING DEVICES AV Connection Component Connection Connect the output ports of an external You can enjoy a video by connecting the device and the AV IN ports of the Component port of an external device to the RGB IN port of the projector. Press projector using an AV cable.
CONNECTING DEVICES Connecting a PC HDMI to DVI Connection Using an HDMI to DVI cable, connect The projector supports Plug & Play. Your the projector's HDMI/MHL port to the PC will automatically detect the projector DVI OUT port. and requires no driver installation. To output audio, use an audio cable for HDMI Connection connection.
CONNECTING DEVICES RGB Connection Connect the PC output and the PC video input port of the projector with the RGB cable. For audio signal, connect the PC and the projector with an optional audio cable. Press the INPUT button on the remote control to select RGB.
CONNECTING DEVICES Connecting a Laptop The table below shows examples of switching the output. For more information, refer to the External You can connect the projector to a Output, Connecting to an External laptop to use various functions. Monitor, or similar sections of the owner's manual of your computer.
CONNECTING DEVICES Using the Mirroring Function of a Mobile Phone MHL Connection The Mobile High-definition Link (MHL) is an interface that can connect a mobile phone to the projector and play video and audio from the mobile phone through the projector.
MAINTENANCE MAINTENANCE Clean your Projector to keep it in optimal condition. Cleaning Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens.
SPECIFICATIONS Supported Monitor Display Supported HDMI/DVI-DTV Mode Horizontal Vertical Horizontal Vertical Resolution Frequency Frequency Resolution Frequency Frequency (kHz) (Hz) (kHz) (Hz) 720 x 480 31.469 59.94 640 x 350 31.468 70.09 31.5 720 x 400 31.469 70.08 720 x 576 31.25 640 x 480 31.469...
Page 82
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
Page 83
The model and serial number of the projector are located on the back or on the side of the projector. Record them below should you ever need service. MODEL SERIAL...