Page 1
Owner's Manual DLP PROJECTOR Please read the safety information carefully before using the product. PA1000 PA1000W www.lg.com (Brazil : www.lge.com/br)
LICENSE LICENSE Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX is a digital video format created ®...
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Safety precautions are given in two forms, i.e. Warning and Caution as detailed below. WARNING: Failure to follow the instructions may cause serious injury and even death. CAUTION: Failure to follow the instructions may cause injury to persons or damage to the product.
Page 4
SAFETY INSTRUCTIONS Read these instructions. Do not place the projector where it Keep these instructions. might be exposed to dust. Heed all warnings. - This may result in fire. Follow all instructions. Do not use the projector in a damp place such as a bathroom where it is Indoor Installation likely to get wet.
Page 5
- This may result in fire due to the Only use the official power cord pro- power outlet overheating. vided by LG Electronics. Do not use Prevent dust from collecting on the other power cords. power plug pins or outlet.
Page 6
SAFETY INSTRUCTIONS When in Use When the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot. WARNING If there is a gas leak in the room with Do not place anything containing the projector, do not touch the projector liquid on top of the projector such as...
Page 7
SAFETY INSTRUCTIONS Cleaning CAUTION Do not place heavy objects on the WARNING projector. Do not spray the projector with - It may fall down and cause personal water when cleaning. Make sure water injury. does not flow into the projector. Be careful not to allow any impact to - This may result in fire or electric the lens during transport.
Page 8
SAFETY INSTRUCTIONS Remove the plug from the outlet Do not touch the lens; doing so can before cleaning the product. result in burns or damage to lens. - Otherwise, this may result in electric Lens and unit may be HOT during shock.
Page 9
- This may result in fire or explosion due to damage to the battery. Always use batteries approved and certified by LG Electronics. - This will prevent damage or fire. Store batteries away from metallic ob- jects, such as keys and paper clips.
CONTENTS CONTENTS LICENSE ENTERTAINMENT Using SCREEN SHARE SAFETY INSTRUCTIONS MY MEDIA PREPARATION Before Using - Connecting a USB Device Accessories - Removing a USB Device Optional Extras To Use My Media Parts and Components - Watching the Videos Installation - Viewing the Photos - Installation Precautions - Listening to Music - Projection Distance per Screen Size...
Page 11
CONTENTS CONNECTING DEVICES Connecting to HD Receiver, DVD, or VCR Player, External Devices - HDMI Connection - HDMI to DVI Connection - AV Connection - Component Connection Connecting a PC - HDMI Connection - HDMI to DVI Connection - RGB Connection Connecting a Laptop - HDMI Connection Connecting to Headphones...
PREPARATION PREPARATION Accessories Accessories included with the project are show below. The pictures may differ slightly from the actual product. Accessories are subject to change without prior notice. New accessories may be added or old ones removed. MARK L / R PAGE Remote Control Owner's Manual...
PREPARATION Optional Extras To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store where you purchased the product. Optional accessories are subject to change without prior notice. Projection Screen Tripod HDMI Cable 3D glasses Video Cable Audio Cable (DLP-LINK or DLP-...
PREPARATION Parts and Components The projector is manufactured using high-precision technology. You may, however, see tiny black dots and/or bright colored dots (red, blue or green) that continuously appear on the projector screen. This is a normal result of the manufacturing process and does not indicate a malfunction.
Page 15
PREPARATION (USB Port) A/V IN Port HDMI/MHL Port (Headphone Port) RGB IN Port DC IN Port...
PREPARATION Installation Installation Precautions Do not place the projector in a hot Place the projector in a well-ventilated or humid environment. environment. - Do not place the projector in a hot, - To prevent internal heat build-up, cold, or humid environment. install the projector in a well- Do not place the projector in a place ventilated place.
PREPARATION Projection Distance per Screen Size Place the projector on a sturdy, level surface, together with the PC or audio/video source. Place the projector an appropriate distance away from the screen. The distance between the projector and the screen determines the actual size of the image. Position the projector so that the lens is at a right angle to the screen.
PREPARATION How to Install the Projector On a Tripod You can install this projector using a camera tripod. As shown below, you can mount the projector instead of a camera on the tripod. When stabilizing the tripod, we recommend using a locking bolt of standard size 4.5 mm or less.
REMOTE CONTROL REMOTE CONTROL Open the lid at the back of the remote control and insert the batteries as described in the instructions. Use new batteries and do not mix regular or rechargeable batteries. (1.5 V AAA) CAUTION y Do not mix new batteries with old ones. POWER Turns the projector on or off.
Page 20
REMOTE CONTROL SETTINGS Displays or closes the Settings menu. STILL Freezes the moving image. (Available in any mode other than USB mode.) Q.MENU MARK Allows you to change the settings easily. Up/Down/Left/Right buttons Switches between menu functions. PAGE Shows the current mode and saves changes to the settings.
Connect the power cord correctly. After waiting for a moment, press the POWER button on the remote control or the control panel. In the Language Selection screen, select a language. WELCOME! Thank you for choosing LG Language Deutsch English 한국어...
USING THE PROJECTOR Focus of the Screen Image When an image appears on the screen, check if it is in focus and fits the screen properly. To adjust the focus of the image, rotate the focus ring. Focus Ring Watching Projector In standby mode, press the POWER button to turn the projector on.
USING THE PROJECTOR Additional Options Menu Description Cinema Formats an image to the Zoom 1 cinemascope ratio, 2.35:1. It Adjusting Aspect Ratio ranges from 1 to 16. Resize an image to view at its optimal Press the button to size by pressing RATIO while you are zoom in or out of the image.
USING THE PROJECTOR Changing input device Selecting an Input Label Displays which devices are connected to To select an external input which input ports. Selects external input. Input Label Press the INPUT button on the ◀ ▶ remote control to display the input Component ◀...
USING THE PROJECTOR Using the Quick Menu Blank Function Using the Blank Function You can customize frequently used menus. Press the Q.MENU button. This function may be effective when you need to draw attention during a meeting Press the button to select a menu and press OK.
Windows, and some other operating systems, may not be compatible with SCREEN SHARE. Ice Cream Sandwich, Jellybean, and KitKat versions of LG’s Android devices are guaranteed to be compatible. When connecting via SCREEN SHARE, place the device close to the projector.
MY MEDIA MY MEDIA Removing a USB Device Click the Q.MENU button. Before Using Use the button to move to USB Device and press the OK button. Connecting a USB Device Select a USB to remove. Wait for confirmation that the USB device has Connect a USB device (external HDD, stopped before removing the USB.
Page 28
MY MEDIA Tips for Using a USB Device If the USB storage device has a built- in auto recognition program or uses its own driver, it may not work. Some USB storage devices may not work or may work incorrectly. If you use a USB extension cable, the USB device may not be recognized or may not work properly.
MY MEDIA To Use My Media Press the SETTINGS button on the remote control. Select MY MEDIA. Select desired file from the list. Watch the chosen file. Sets play related settings by checking option during disk playback. My Media supporting file Maximum data transfer rate: 20 Mbps (Mega bit per second) External supported subtitle formats:...
Page 30
MY MEDIA Video Supported Codec Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640x480 @ 30p) Extension Codec Video VC-1 Advanced Profile, VC-1 Simple and Main Profiles .asf, .wmv Audio WMA Standard, WMA 9 Professional Video DivX3.11, DivX4, DivX5, DivX6, XVID, H.264/AVC .divx, .avi Audio...
Page 31
MY MEDIA Audio File File type Item Info Bit rate 32 kbps ~ 320 kbps Sampling rate 32 kHz ~ 48 kHz Bit rate 32 kbps ~ 640 kbps Sampling rate 32 kHz, 44.1 kHz, 48 kHz Bit rate 32 kbps ~ 448 kbps MPEG Sampling rate 32 kHz ~ 48 kHz...
MY MEDIA Watching the Videos In the Movie List, you can watch movies stored on the connected USB device. Controls playback and sets options while viewing videos. Tips for Playing Video Files Some subtitles created by users may not work properly. The video and subtitle files should be placed in the same folder.
Page 33
MY MEDIA Browsing Movie List Control playback by using the following buttons. Play a video file stored in the connected device. Connect a USB storage device. Press the USB button. Use the , or button to select Movie List and press the OK button. ��...
Page 34
MY MEDIA Options for Movie List Setting Description Subtitle The subtitle can be turned Press the Q.MENU button. Lan- on or off. Use the button to move to Language : One of any of guage a desired option and press the OK the available languages button.
Page 36
MY MEDIA Registering the DivX code To deregister the DivX code Checks DivX Reg. Code for replaying Use the DivX deregistration code to DivX protected videos. Register at deactivate the DivX DRM function. http://vod.divx.com. In the Settings menu, move to Use Reg.
MY MEDIA Viewing the Photos Browsing Photo List Connect a USB storage device. You can view photos stored on a connected device. Press the USB button. Supported Photo Files Use the , or button to select Photo List and press the OK button. PHOTO (*.JPEG) Use the , or...
Page 38
MY MEDIA Setting Description Control playback by using the following buttons. Hide Hides the menu on the full size screen. To see the menu, press 01_a.jpg 2008/12/10 1920 x 1080 the OK button on the 479 KB [1/4] remote control. Exit Exit from full screen photo view.
Page 39
MY MEDIA Options for Photo List Press the Q.MENU button. Use the button to move to a desired option and press the OK button. , or button to set up each item. Set Photo View. Setting Description Slide Selects a slideshow speed. speed Selects a music folder for (Back-...
MY MEDIA Listening to Music Browsing Music List Connect a USB storage device. You can play audio files stored on the connected device. Press the USB button. Supported Music Files Use the , or button to select Music List and press the OK button. *.MP3 Use the , or...
Page 41
MY MEDIA Options for Music List Control playback by using the following buttons. Press the Q.MENU button. Use the button to move to Page 1/1 ꘧ Page Change Music List USB STORAGE DEVICE a desired option and press the OK Drive1 Page 1/1 button.
MY MEDIA Browsing File List Viewing Files Connect a USB storage device. You can see document files stored on a connected device. Press the USB button. Use the , or button to select File Supported File Formats List and press the OK button. XLS, XLSX, DOC, DOCX, PPT, PPTX, Use the , or...
Page 43
MY MEDIA Options for File List Control playback by using the following buttons. Press the Q.MENU button. Click Go Page then the pop-up , or button to set up window for selecting the number each item. of page appears. Input the page to move to the page you want.
3D FUNCTION 3D FUNCTION 3D technology uses different video frames for each eye to add depth to the video. While Watching 3D Warning about photosensitivity seizures - Some users may experience a WARNING seizure or other abnormal symptoms when they are exposed to a flashing If you view 3D video or images too light or particular patterns from a video closely for a long period of time, your...
3D FUNCTION CAUTION Please check the following when using 3D glasses. Extra special care is required for chil- dren watching a 3D video. Do not use 3D glasses as ordinary glasses, sunglasses or protective When Watching 3D Video goggles. Watch 3D images within the optimum - If you do so, this may cause injury.
3D FUNCTION Requirements for Watching 3D Images * Optimum viewing angle: Top/Bottom/Left/Right 9° Recommended viewing distance: 3 m - 5 m Recommended screen size: 101 cm * Watching 3D videos should be done in dark room environments only. NOTE The pairing with the DLP-LINK glasses is affected by the intensity of light reflected from the screen.
Page 47
3D FUNCTION Please check the minimum system requirements for your computer. Minimum requirements are as follows: Microsoft® Windows® XP, Vista 32/64 bit ,Windows 7 32/64 bit Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higher More than 1 GB of system memory (2 GB recommended) Free space of 100 MB or more DirectX 9 or higher Video card should support 120 vertical frequency (Hz).
3D FUNCTION To Use DLP-LINK (DLP-Ready) Type Glasses While watching 3D images from the projector, press buttons on the glasses. When you press the button, the glasses flicker to be synchronized with the 3D images. (The flickering is a unique operation method of DLP-LINK type glasses. It may be different depending on the glasses type.) If the glasses flicker or problems occur while watching 3D, first turn the lights off to make the room darker.
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS SETTINGS Press the SETTINGS button. Use the , or button to select the desired item and press the OK button. button to set up the desired item and press the OK button. Use the , or Press the EXIT button when completed.
CUSTOMIZING SETTINGS PICTURE Settings Press the SETTINGS button. PICTURE ꔂ Move ꔉ OK Use the , or button to select y ꕊ Energy Saving : Medium PICTURE and press the OK button. y Picture Mode : Vivid Use the , or button to set up the y Contrast 100 desired item and press the OK button.
Page 51
CUSTOMIZING SETTINGS Item Description Contrast Adjusts the difference between bright and dark regions of the screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark. Horizontal and Vertical Sharpness are available only in Expert1/2. Color Adjusts the intensity of all colors.
CUSTOMIZING SETTINGS Advanced Control Item Description Dynamic Adjusts contrast and colour to the optimal level according to the Contrast screen’s brightness. Dynamic Adjusts colours for more natural-looking colours. Color Color Gamut Selects the range of colours that can be expressed. Standard: Displays the original colors of an input signal regardless of the display features.
Page 53
CUSTOMIZING SETTINGS Item Description Color In Expert mode, you can customize the options of each mode. Temperature Gamma: Select 1.9, 2.2, or 2.4. a. Method: 2 points - Pattern: Inner, Outer - Points: Low, High - Red/Green/Blue: Adjustable range -50 ~ +50. - Apply to all inputs: The values of the Color Temperature is applied to all the input modes.
Page 54
CUSTOMIZING SETTINGS Picture Option Item Description Noise Reduc- Reduces screen noise in the video. tion MPEG Noise Eliminates noise generated while creating digital picture signals. Reduction Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture input using the degree of darkness (black level) of the screen.
The user can select various sound effects. Mode Clear Voice II Makes the voice from the projector crisp and clear. Virtual Sur- LG’s proprietary audio processing technology round allows 5 channel-like surround sound from two speakers. When Clear Voice II is set to on, Virtual Surround cannot be selected.
CUSTOMIZING SETTINGS TIME Settings Press the SETTINGS button. TIME ꔂ Move ꔉ OK Use the , or button to select TIME y Sleep Timer : Off and press the OK button. y Auto Off : 60 min. y Automatic Standby : 4 hours Use the , or button to set up the...
Press the SETTINGS button. WIRELESS ꔂ Move ꔉ OK Use the , or button to select SCREEN SHARE : [PJTR][LG][0000] WIRELESS and press the OK button. y Group y Channel Use the , or button to set up the desired item and press the OK button.
CUSTOMIZING SETTINGS OPTION 1 Settings OPTION 1 Press the SETTINGS button. ꔂ Move ꔉ OK Use the , or button to select y Language OPTION 1 and press the OK button. y 3D Mode y Auto Input Search : Off Use the , or button to set up the...
CUSTOMIZING SETTINGS OPTION 2 Settings OPTION 2 Press the SETTINGS button. ꔂ Move ꔉ OK Use the , or button to select y Keystone OPTION 2 and press the OK button. y Auto Keystone : On y PJT Mode : Front Use the , or button to set up the...
Page 60
CUSTOMIZING SETTINGS Item Description Auto Power Makes the projector turn on automatically when the adaptor plug is inserted. Item When the AC/DC plug is connected to the projector, it turns on automatically. When the AC/DC plug is connected to the projector, it goes into standby mode.
CONNECTING DEVICES Connecting to HD HDMI to DVI Connection Receiver, DVD, or Using an HDMI to DVI cable, connect VCR Player, External the projector's HDMI/MHL port to the DVI OUT port. Devices To output audio, use an audio cable for connection.
CONNECTING DEVICES AV Connection Component Connection Connect the output ports of an external You can enjoy a video by connecting the device and the A/V IN ports of the Component port of an external device to the RGB IN port of the projector. Press projector using an AV cable.
CONNECTING DEVICES Connecting a PC HDMI to DVI Connection Using an HDMI to DVI cable, connect The projector supports Plug & Play. Your the projector's HDMI/MHL port to the PC will automatically detect the projector DVI OUT port. and requires no driver installation. To output audio, use an audio cable for HDMI Connection connection.
CONNECTING DEVICES RGB Connection Connect the PC output and the PC video input port of the projector with the RGB cable. For audio signal, connect the PC and the projector with an optional audio cable. Press the INPUT button on the remote control to select RGB-PC.
CONNECTING DEVICES Connecting a Laptop The table below shows examples of switching the output. For more information, refer to the External You can connect the projector to a Output, Connecting to an External laptop to use various functions. Monitor, or similar sections of the owner's manual of your computer.
CONNECTING DEVICES Using the Mirroring Function of a Mobile Phone MHL Connection The Mobile High-definition Link (MHL) is an interface that can connect a mobile phone to the projector and play video and audio from the mobile phone through the projector.
MAINTENANCE MAINTENANCE Clean your Projector to keep it in optimal condition. Cleaning Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. Use an air spray or a cleaning cloth to clean the lens.
SPECIFICATIONS Supported Monitor Display Supported HDMI/DVI-DTV Mode Horizontal Vertical Horizontal Vertical Resolution Frequency Frequency Resolution Frequency Frequency (kHz) (Hz) (kHz) (Hz) 720 x 480 31.469 59.94 640 x 350 31.468 70.09 31.5 720 x 400 31.469 70.08 720 x 576 31.25 640 x 480 31.469...
Page 72
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
Page 73
The model and serial number of the projector are located on the back or on the side of the projector. Record them below should you ever need service. MODEL SERIAL...