Replacing The Mouse; Keyboard Connector - Lenovo ThinkStation 4155 Hardware Installation And Replacement Manual

Hide thumbs Also See for ThinkStation 4155:

Table of Contents

Replacing the mouse

This section provides instructions on how to replace a mouse.

To replace a mouse:

1. Remove all media from the drives, shut down your operating system, and turn

2. Unplug all power cords from electrical outlets.

3. Locate the connector for the mouse. See "Locating controls and connectors on

Figure 46. Keyboard connector

4. Disconnect the failing mouse cable from the computer.

5. Connect the new mouse cable to one of the USB connectors.

6. Go to Chapter 4, "Completing the parts replacement," on page 49.

Attention

Do not open your computer or attempt any repair before reading and understanding the

"Important safety information" in the ThinkStation Safety and Warranty Guide that came

with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to:

http://www.lenovo.com/support

off all attached devices and the computer.

the front of your computer" on page 5 or "Locating connectors on the rear of

your computer" on page 6.

Chapter 3. Installing options and replacing hardware

Table of Contents

Thinkstation 4218 Thinkstation 4158