Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
User Guidelines
This command enables the recording of device management sessions (Telnet,
serial and WEB but not SNMP).
It records only users that were identified with a username (e.g. a user that was
logged in with a line password is not recorded).
If accounting is activated, the device sends a "start"/"stop" messages to a
Radius server when a user logs in / logs out respectively.
The device uses the configured priorities of the available Radius servers in
order to select the Radius server.
The following table describes the supported Radius accounting Attributes
Values, and when they are sent by the switch.
N a m e
User-Name (1)
NAS-IP-Address (4)
Class (25)
Called-Station-ID (30)
Calling-Station-ID (31)
Acct-Session-ID (44)
Acct-Authentic (45)
Acct-Session-Time (46)
Acct-Terminate-Cause (49)
Example
console(config)# aaa accounting login start-stop group radius
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
232
AAA Commands
CLI\files\AAA.fm
Sta r t
St o p
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
D e s c r i p t io n
User's identity.
The switch IP address that is
used for the session with the
Radius server.
Arbitrary value is included in all
accounting packets for a specific
session.
The switch IP address that is
used for the management
session.
The user IP address.
A unique accounting identifier.
Indicates how the supplicant was
authenticated.
Indicates how long the user was
logged in.
Reports why the session was
terminated.
Advertisement
Table of Contents
