Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
precedence number—Specifies the IP precedence value.
•
icmp-type—Specifies an ICMP message type for filtering ICMP packets.
•
Enter a number or one of the following values: destination-unreachable
(1), packet-too-big (2), time-exceeded (3), parameter-problem (4), echo-
request (128), echo-reply (129), mld-query (130), mld-report (131),
mldv2-report (143), mld-done (132), router-solicitation (133), router-
advertisement (134), nd-ns (135), nd-na (136). (Range: 0–255)
icmp-code—Specifies an ICMP message code for filtering ICMP
•
packets. (Range: 0–255)
destination-port—Specifies the UDP/TCP destination port. You can
•
enter a range of ports by using a hyphen. E.g. 20 - 21. For TCP enter a
number or one of the following values: bgp (179), chargen (19), daytime
(13), discard (9), domain (53), drip (3949), echo (7), finger (79), ftp
(21), ftp-data (20), gopher (70), hostname (42), irc (194), klogin (543),
kshell (544), lpd (515), nntp (119), pop2 (109), pop3 (110), smtp (25),
sunrpc (1110, syslog (514), tacacs-ds (49), talk (517), telnet (23), time
(37), uucp (117), whois (43), www (80). For UDP enter a number or one
of the following values: biff (512), bootpc (68), bootps (67), discard (9),
dnsix (90), domain (53), echo (7 ), mobile-ip (434), nameserver (42),
netbios-dgm (138), netbios-ns (137), non500-isakmp (4500), ntp (123),
rip (520), snmp (161), snmptrap (162), sunrpc (111), syslog (514), tacacs
(49), talk (517), tftp (69), time (37), who (513), xdmcp (177). (Range:
0–65535)
source-port—Specifies the UDP/TCP source port. Predefined port names
•
are defined in the destination-port parameter. (Range: 0–65535)
match-all list-of-flag—List of TCP flags that should occur. If a flag
•
should be set it is prefixed by "+".If a flag should be unset it is prefixed
by "-". Available options are +urg, +ack, +psh, +rst, +syn, +fin, -urg, -
ack, -psh, -rst, -syn and -fin. The flags are concatenated to a one string.
For example: +fin-ack.
time-range-name—Name of the time range that applies to this permit
•
statement. (Range: 1–32)
Default
No IPv6 access list is defined.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 2 0 1 2 - F O R P R O O F O N LY
704
CLI\files\ACL.fm
Advertisement
Table of Contents
