hit counter script
LG DLEX3370W How To Use Manual

LG DLEX3370W How To Use Manual

Hide thumbs Also See for DLEX3370W:

Advertisement

HOW TO USE

Operating the Dryer

1
2
3
4
5
6
MFL67731035_en_140818.indd 27
CLEAN THE LINT FILTER
If the lint filter has not already been cleaned, lift out the filter and remove the
lint from the last load. This will help ensure the fastest and most efficient drying
performance.
Lint
Filter
LOAD THE DRYER
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
TURN ON THE DRYER
Press the POWER button to turn on the dryer. The cycle LEDs will illuminate
and a signal will sound, if turned on. Refer to page 10.
SELECT A CYCLE
Turn the cycle selector knob either direction until the LED for the desired cycle
is on. The preset temperature, dry level, and option settings for that cycle will
be shown. Refer to page 28. Default settings for the selected cycle can now be
changed if desired. This can be done using the cycle modifier buttons as shown
on page 30. Cycle options can be added using the option buttons as shown on
page 30-32.
NOTE
Not all options or modifiers are available on all cycles. A different chime will
sound and the LED will not come on if the selection is not allowed.
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. The cycle can be paused at
any time either by opening the door or by pressing the START/PAUSE button. If
the cycle is not restarted within 4 minutes, the dryer will shut off and the cycle
settings will be lost.
END OF CYCLE
When the cycle is finished, the chime will sound if it is set. Remove your
clothing from the dryer immediately to reduce wrinkling. If WRINKLE CARE
is selected, the dryer will tumble briefly every few minutes to help prevent
wrinkles from setting in the clothes.
27
hOW TO uSE
2014.8.18 9:37:7 AM

Advertisement

Table of Contents
loading

Summary of Contents for LG DLEX3370W

  • Page 1: Operating The Dryer

    hOW TO uSE HOW TO USE Operating the Dryer CLEAN THE LINT FILTER If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last load. This will help ensure the fastest and most efficient drying performance.
  • Page 2: Cycle Guide

    Sensor dry cycles utilize LG’s unique dual sensor Use manual dry cycles to select a specific amount of system to detect and compare the moisture level drying time and a drying temperature. When a manual...
  • Page 3: Sorting Load

    hOW TO uSE Following are instructions for starting and using your new dryer. Please refer to specific sections of this manual for more detailed information. Sorting Load Check the lint filter before every load fabric care labels Most articles of clothing feature fabric care labels that Always make sure the lint filter is clean before starting a include instructions for proper care.
  • Page 4: Cycle Modifier Buttons

    hOW TO uSE Cycle modifier buttons SENSOR DRY cycles have preset settings that are Your dryer features several additional cycle options to selected automatically. MANUAL DRY cycles have customize cycles to meet your individual needs. Certain default settings, but you may also customize the option buttons also feature a special function (see the settings using the cycle modifier buttons.
  • Page 5: Special Functions

    hOW TO uSE Special functions damp dry signal The option buttons also activate special functions, With this option, the dryer will signal when the load including Child Lock. is approximately 80% dry. This allows you to remove Select the option by pressing the option button. Press faster- drying lightweight items or items that you would and hold the option button for special features marked like to iron or hang while still slightly damp.
  • Page 6: Custom Program

    hOW TO uSE Custom program 3. Fill the steam feeder just to the filter screen. Tap Water If you have a special combination of settings that you ONLY use frequently, you can save these settings as a CUSTOM Steam PROGRAM. Feeder to save a custom program: 1.
  • Page 7 TO uSE Steam functions (cont.) using the steam options: LG’s new steam technology allows you to inject fabrics with a swirling jet of hot steam to refresh clothes, reduce The REDUCE STATIC option injects steam late in the static, and make ironing easier.
  • Page 8: Steam Cycle Guide

    hOW TO uSE Steam functions (cont.) NOTE • Steam may not be clearly visible during the steam cycles. This is normal. wWArNiNg • Do not use Steam Fresh™ with items such as wool, • Do not open the dryer door during steam cycles. wool blanket, leather jackets, silk, wet clothes, Failure to follow this warning can cause serious injury lingerie, foam products, or electric blankets.
  • Page 9: Before Using The Tag On Function

    To use the Tag On function: details. 1. Download the LG Smart Laundry&DW App to your smart phone. 2. Turn on the NFC (Near Field Communication) function The Tag On guide in your smart phone.
  • Page 10 Scan this QR code with your smart phone to quickly access the LG Smart Laundry&DW App for download ※ Images are for reference only. The actual LG Smart Laundry&DW application may be different. 3. Select ‘Tag On Diagnosis’ . MFL67731035_en_140818.indd 36...
  • Page 11 5. Press the Call button to initiate the call to LG’s Support Center. 1 888 542 2623 1 888 542 2623 1 888 542 2623 ※ Images are for reference only. The actual LG Smart Laundry&DW application may be different. MFL67731035_en_140818.indd 37 2014.8.18 9:37:21 AM...
  • Page 12 Download’ . the cycle selector knob to Download Cycle. ※ Images are for reference only. The actual LG Smart Laundry&DW application may be different. 4. Touch the Tag On logo. - When a Tag On screen appears...
  • Page 13 Guide 2. Select ‘Laundry Stats’ . about Exhaust check. ※ Images are for reference only. The actual LG Smart Laundry&DW application may be different. 4. Touch the Tag On logo. - When a Tag On screen...
  • Page 14 TO uSE Laundry Stats (run Cycle Again) using Lg Smart Laundry&DW application 4. Check whether washing 1. Select ‘Dryer Diary’ on the starts with the selected cycle. Laundry Stats screen. - The screen as shown below - Select ‘Dryer Diary’ at the...
  • Page 15 (This might happen due to the different NFC antenna positions for ※ Images are for reference only. The actual LG Smart each phone.) Laundry&DW application may be different. 4. Select a laundry category based on the issue you want the machine to focus on.

Table of Contents