Multiple Chart Synchronization - Raymarine a65 Operation Instructions Manual
Lighthouse ii
Hide thumbs
Also See for a65:
- Operation instructions manual (390 pages) ,
- Installation and operation instructions manual (308 pages) ,
- Owner's handbook manual (100 pages)
Table of Contents
Advertisement
offset. If you change the position to Partial Offset
or Full Offset, the view ahead of your vessel will be
increased.
True Motion
When the motion mode is set to True Motion,
the chart is fixed and the vessel moves in true
perspective to fixed landmasses on-screen. As the
vessel's position approaches the edge of the screen,
the chart picture is automatically reset to reveal the
area ahead of the vessel.
Note: It is not possible to select True Motion when
the orientation is set to Head Up.
Auto Range
Auto Range selects and maintains the largest
possible scale of chart that will display both the
vessel and the target waypoint. Auto range is not
available if radar-chart synchronization is on.
Setting the motion mode
To change the motion mode follow the steps below.
From the chart application menu:
1. Select Presentation.
2. Select View & Motion.
3. Select Motion Mode:.
4. Select True Motion, Relative Motion, or Auto
Range option as appropriate.
Once selected the screen will update to reflect the
new mode.
Changing the position of the boat icon
From the chart application menu:
1. Select Presentation.
2. Select View & Motion.
3. Select Boat Position.
4. Select Center, Partial Offset, or Full Offset as
appropriate.
168
14.12 Multiple chart synchronization
You can synchronize the heading, range, and
position information across multiple chart views and
networked displays.
When chart synchronization is enabled:
• It is indicated by "CHRT Sync" in the chart
application title bar.
• Any changes made to the heading, range or
position in any chart instance will be reflected in
all other chart instances.
Note: When the 2D and 3D chart views are
synchronized, the Motion Mode is always Relative
D12304-1
Motion.
Synchronizing multiple chart instances
From the Chart application's View & Motion menu:
(Menu > Presentation > View & Motion)
1. Select Chart Sync.
2. Select Chart from the list.
A tick is placed next to the selected option.
3. Repeat the steps above for each chart instance
and if required on each networked MFD you want
to sync the chart view.
Note: You cannot sync to another Chart if Radar
sync is turned on.
D12305-1
LightHouse MFD operation instructions
- Quick Links:
- Memory Cards and Chart Cards
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
