3.2 a Series Controls
1
2
Descrip-
tion
Functions
1
Touch-
Touch the screen to operate functions,
screen
including all menu operations.
2
Power
• Press once to switch the unit ON.
• Once powered on, press the Power
button again to open the shortcuts page
where you can adjust the brightness,
perform a screen capture, access
Powersave mode or access the power
controls of external devices.
• Press and hold to switch the unit OFF.
• If an integrated pilot is engaged, press
and hold to put the autopilot into
STANDBY mode.
3
Card
MicroSD card reader
reader slot
• a6x and a7x = 1 x MicroSD card slot
• a9x and a12x = 2 x MicroSD card slots
Getting started
3.3 e7 / e7D Controls
D12577-1
Description Functions
1
Touch-
screen
2
Menu
3
UniControl
4
Back
5
WPT / MOB
6
Power
7
Card reader
slot
you can touch the screen to operate many
common functions, including all menu
operations.
Accesses menus. Press again to close
menus.
Provides a joystick, rotary control and
an OK push button for using menus and
applications.
Press to return to a previous menu or
dialog level.
• Press and release to access the
waypoint options. Press again to place
a waypoint.
• Press and hold to place a Man
Overboard (MOB) marker at your
current position.
• Press once to switch the unit ON.
• Once powered on, press the Power
button again to adjust the brightness,
perform a screen capture, access
Powersave mode or access the power
controls for external devices.
• Press and hold to switch the unit OFF.
• If an integrated pilot is engaged,
press and hold put the autopilot into
STANDBY mode.
Open the card door to insert or remove
a MicroSD card. There are 2 card slots
(labelled 1 and 2), used for electronic
charts and archiving waypoint, route,
track and settings data.
1
D12179-1
23