Table of Contents
Advertisement
Figure 10 Attaching the feet to the bottom of the Autoloader
Removing the shipping lock
The shipping lock prevents the robotic transport mechanism from moving during shipment. You
must remove the shipping lock before powering on the device. The shipping lock is held in place
with a piece of tape and is located in the top center of the device. After the shipping lock is
removed, it should be stored on the back panel of the device for future use.
To remove and store the shipping lock:
1.
Locate the tape and lock at the top of the device (see
Figure 1 1 Shipping lock location
2.
Remove the tape, then remove the lock.
3.
Store the lock on the back panel of the device (see
Figure 12 Shipping lock storage location
Shipping lock location (page
Figure 12 (page
23)).
Removing the shipping lock
23)) .
23
- Quick Links:
- Autoloader Options
- Back Panel Overview
Hide quick links:
Advertisement
Table of Contents
