hit counter script
LG S5000 Service Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Cell Phone
  5. S5000
  6. Service manual
LG S5000 Service Manual

LG S5000 Service Manual

Hide thumbs Also See for S5000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Service Manual
S5000
Date: November, 2005 / Issue 1.0

Advertisement

Table of Contents
loading

Related Manuals for LG S5000

Summary of Contents for LG S5000

  • Page 1 Service Manual S5000 Date: November, 2005 / Issue 1.0...

  • Page 2: Table Of Contents

    Table Of Contents 1. Introduction ........5 4.15 RTC Trouble ........89 4.16 Indication LED Trouble ......90 1.1 Purpose........... 5 4.17 Folder on/off Trouble......91 1.2 Regulatory Information......5 1.3 Abbreviations .......... 7 5. DOWNLOAD AND CALIBRATION 92 2. PERFORMANCE......9 5.1 Download ..........92 5.2 Calibration..........96 2.1 H/W Features..........
  • Page 3 - 4 -...

  • Page 4: Introduction

    1. INTRODUCTION 1. INTRODUCTION 1.1 Purpose This manual provides the information necessary to repair, calibration, description and download the features of this model. 1.2 Regulatory Information A. Security Toll fraud, the unauthorized use of telecommunications system by an unauthorized part (for example, persons other than your company’s employees, agents, subcontractors, or person working on your company’s behalf) can result in substantial additional charges for your telecommunications services.
  • Page 5 1. INTRODUCTION E. Notice of Radiated Emissions This model complies with rules regarding radiation and radio frequency emission as defined by local regulatory agencies. In accordance with these agencies, you may be required to provide information such as the following to the end user. F.

  • Page 6: Abbreviations

    1. INTRODUCTION 1.3 Abbreviations For the purposes of this manual, following abbreviations apply: Automatic Power Control Baseband Bit Error Ratio CC-CV Constant Current - Constant Voltage Digital to Analog Converter Digital Communication System dB relative to 1 milli watt Digital Signal Processing EEPROM Electrical Erasable Programmable Read-Only Memory Electrostatic Discharge...
  • Page 7 1. INTRODUCTION Power Amplifier Module Printed Circuit Board Programmable Gain Amplifier Phase Locked Loop PSTN Public Switched Telephone Network Radio Frequency Receiving Loudness Rating Root Mean Square Real Time Clock Surface Acoustic Wave Subscriber Identity Module Sending Loudness Rating SRAM Static Random Access Memory PSRAM Pseudo SRAM...

  • Page 8: Performance

    2. PERFORMANCE 2. PERFORMANCE 2.1 H/W Features Item Feature Comment Classification : Li-on Capacity min 1000mAh Standard Battery Voltage :3.7V Cell Weight : 22g Under the minimum current consumption environment Stand by Current (such as paging period 9), the level of standby current is below 4mA.

  • Page 9: Technical Specification

    2. PERFORMANCE 2.2 Technical Specification Item Description Specification EGSM TX: 890 + (n-1024) x 0.2 MHz RX: 935 + (n-1024) x 0.2 MHz (n=975~1024) Frequency Band TX: 1710 + (n-512) x 0.2 MHz RX: 1805 + (n-512) x 0.2 MHz (n=512~885) TX: 1810 + (n-512) x 0.2 MHz RX: 1905 + (n-512) x 0.2 MHz (n=512~885) RMS <...
  • Page 10 2. PERFORMANCE Item Description Specification GSM, EGSM Offset from Carrier (kHz). Max. dBc +0.5 600 ~ 1,200 1,200 ~ 1,800 1,800 ~ 3,000 3,000 ~ 6,000 Output RF Spectrum 6,000 (due to modulation) DCS, PCS Offset from Carrier (kHz). Max. dBc +0.5 600 ~ 1,200 1,200 ~ 1,800...
  • Page 11 2. PERFORMANCE Item Description Specification DCS, PCS Offset from Carrier (kHz) Max. (dBm) Output RF Spectrum (due to switching transient) 1,200 1,800 Spurious Emissions Conduction, Emission Status GSM, EGSM BER (Class II) < 2.439% @-102 dBm Bit Error Ratio DCS, PCS BER (Class II) <...
  • Page 12 2. PERFORMANCE Item Description Specification STMR 13 5 dB Stability Margin > 6 dB dB to ARL (dB) Level Ratio (dB) 17.5 22.5 30.7 Distortion 33.3 33.7 31.7 25.5 Side Tone Distortion Three stage distortion < 10% System frequency 2.5ppm (13 MHz) tolerance 32.768KHz tolerance 30ppm...
  • Page 13 2. PERFORMANCE Item Description Specification Forced shut down Voltage 3.35 0.03 V 1 Li-ion Battery Standard Voltage = 3.7 V Battery Type Battery full charge voltage = 4.2 V Capacity: 1000mAh Switching-mode charger Travel Charger Input: 100 ~ 240 V, 50/60 Hz Output: 5.2 V, 800 mA - 14 -...

  • Page 14: Technical Brief

    3. TECHNICAL BRIEF 3. TECHNICAL BRIEF 3.1 Transceiver (SI4210, U501) The RF parts consist of a transmitter part, a receiver part, a frequency synthesizer part, a voltage supply part, and a VCTCXO part. The Aero I transceiver is the integrated RF front end for multi-band GSM/GPRS digital cellular handsets and wireless data modems.
  • Page 15 3. TECHNICAL BRIEF (1) Receiver Part The Aero I transceiver uses a low-IF receiver architecture which allows for the on chip integration of the channel selection filters, eliminating the external RF image reject filters and the IF SAW filter required in conventional super-heterodyne architectures. A.
  • Page 16 3. TECHNICAL BRIEF Figure. 3-2 SI4205 RECEIVER PART B. Intermediate frequency (IF) and Demodulation A quadrature image-reject mixer downconverts the RF signal to a 100KHz intermediate frequency (IF) with the RFLO from the frequency synthesizer. The RFLO frequency is between 1737.8 to 1989.9 MHz, and is internally divided by 2 for GSM 850 and E-GSM 900 modes.
  • Page 17 3. TECHNICAL BRIEF (2) Transmitter Part The transmit (Tx) section consists of an I/Q baseband upconverter, and offset phase-locked loop (OPLL) and two output buffers that can drive external power amplifiers (PA), one for the GSM 850 (824-849 MHz) and E-GSM 900 (880-915 MHz) bands and one for the DCS 1800 (1710-1785 MHz) and PCS 1900 (1850-1910MHz) bands.

  • Page 18: Pam

    3. TECHNICAL BRIEF 3.2 PAM (AWT6171, U500) The AWT6171 input and output terminals are internal matched to 50 ohms and DC blocked,reducing the number of external components required in the final application.Both PA die,GSM850/900 and DCS/PCS.are fabricated using state of the art InGaPHBT technology,known for it is proven reliability and temperature stability.
  • Page 19 3. TECHNICAL BRIEF B. OPLL The OPLL consists of a feedback mixer, a phase detector, a loop filter, and a fully integrated TXVCO. The TXVCO is centered between the DCS 1800 and PCS 1900 bands, and its output is divided by 2 for the GSM 850 and E-GSM 900 bands.

  • Page 20: 26 Mhz Clock

    3. TECHNICAL BRIEF 3.3 26 MHz Clock (VCTCXO, X500) The 26 MHz clock(X500) consists of a TCXO(Temperature Compensated Crystal Oscillator) which oscillates at a frequency of 26 MHz. It is used within the Si4205, analog base band chipset (U101, AD6537B), digital base band chipset (U103, AD6527) Figure 3-6 VCTCXO CIRCUIT DIAGRAM 2V75_VVCXO X500...
  • Page 21 3. TECHNICAL BRIEF Figure 3-7 RF LDO CIRCUIT DIAGRAM VBAT RF2V85 U503 MIC5255-2.85BM5 R517 CLKON C544 C545 C546 R518 100K 0.01u 4.7u - 22 -...

  • Page 22: Digital Main Processor

    3. TECHNICAL BRIEF 3.5 Digital Main Processor (AD6527, U103) Figure 3-8. SYSTEM INTERCONECTION OF AD6527 EXTERNAL INTERFACE AD6527/AD6527B GSM-PROCESSOR JTAGEN KEYPADCOL[7:0] Keypad KEYPADROW[7:0] TCK,TMS JTAG Matrix TDI,TDO BACKLIGHT[3.0] Backlight/ JTAG,HSL,GPIO Service Light Universal Servicelight USCTX/RX/CLK System Enhanced Generic Serial Port A Connector Generic Serial Port B Generic Serial Port D...
  • Page 23 3. TECHNICAL BRIEF • AD6527 is an ADI designed processor. • AD6527 consists of 1. Control Processor Subsystem • 32-bit ARM7TDMI Control Processor • 58.5 MHz operation at 1.7V • On-board 16KB instruction/Data Cache • 1 Mbits of on-chip System SRAM 2.
  • Page 24 3. TECHNICAL BRIEF 3.5.1 Interconnection with external devices A. RTC block interface Countered by external X-TAL The X-TAL oscillates 32.768KHz B. LCD module interface The LCD module is controlled by CAMERA IC, CL765A If CL765A is in the state of by-pass mode, the LCD control signals from AD6527 are by-passed through CL765A.
  • Page 25 3. TECHNICAL BRIEF C. RF interface The AD6527 control RF parts through PA_BAND, ANT_SW1, ANT_SW2, CLKON , PA_EN, SEN, SDATA, SCLK, RF_PWR_DWN. Table 3-5. RF CONTRON SIGNALS DISCRIPTION Signals Description PA_BAND (GPO 17) PAM Band Select ANT_SW1 (GPO 9) Antenna switch Band Select ANT_SW2 (GPO 11) Antenna switch Band Select CLKON...
  • Page 26 3. TECHNICAL BRIEF F. SIM interface The AD6527 provides SIM Interface Module. The AD6527 checks status periodically during established call mode whether SIM card is inserted or not, but it doesn't check during deep Sleep mode. In order to communicate with SIM card, 3 signals SIM_DATA, SIM_CLK, SIM_RST(GPIO_23) are required.
  • Page 27 3. TECHNICAL BRIEF 3.5.2 AD6527 Architecture Figure 3-10. AD6527 Architecture AD6527/AD6527B AD6527/AD6527B AS6535 AS6535 SErial Link SErial Link Audio Baseband Audio Baseband Subststem Subststem and Power and Power Management Management DSP BUS DSP BUS EBUS EBUS PBUS PBUS DMA and BUS DMA and BUS PBUS 1M PBUS 1M...

  • Page 28: Analog Main & Power Management Processor

    3. TECHNICAL BRIEF 3.6 Analog Main & Power Management Processor (AD6537B, U101) Figure 3-11. AD6537B FUNCTIONAL BLOCK DIAGRAM - 29 -...
  • Page 29 3. TECHNICAL BRIEF • AD6537B is an ADI designed Analog Baseband processor. AD6537B covers the processing GMSK modulation interface, Aux ADC, Voice signal processing and Power Management. • AD6537B consists of 1. BB Transmit section • GMSK Modulation • I-channel & Q-channel Transmit DACs and Filters •...
  • Page 30 3. TECHNICAL BRIEF 3.6.1 Baseband Transmit Section 1. The AD6537B Baseband Transmit Section is designed to support GMSK for both single-slot and multi-slot application. 2. The transmit channel consists of a digital GMSK modulator, a matched pair of 10-bit DACs and a matched pair of reconstruction filter.
  • Page 31 3. TECHNICAL BRIEF 3.6.3 Auxiliary Section 1. This section includes an Automatic Frequency Control(AFC) DAC, voltage reference buffers, an Auxiliary ADC, and light controllers. • AFC DAC: 13 bits 2. This section also contains AUX ADC and Voltage Reference • IDAC: 10 bits •...
  • Page 32 3. TECHNICAL BRIEF 3.6.4 Audio Section 1. Receive audio signal from microphone. This model uses differential configuration. 2. Send audio signal to speaker. This model uses differential configuration. 3. This section provides an audio codec with a digital-to-analog converter and an analogto-digital converter, a ring tone volume controller, a microphone interface, and multiple analog input and output channels.

  • Page 33: Power Management

    3. TECHNICAL BRIEF 3.6.5 Power Management Figure 3-16. AD6537B POWER MANAGEMENT SECTION 1. Power up sequence logic 1. The AD6537B controls power on sequence 2. Power on sequence - If a battery is inserted, the battery powers the 8 LDOs. - Then if PWRONKEY is detected, the LDOs output turn on.
  • Page 34 3. TECHNICAL BRIEF Figure 3-17. AD6537B POWER MODE LOGIC 2. LDO Block 1. There are 8 LDOs in the AD6537B. - VCORE : supplies Digital baseband Processor core and AD6537B digital core (1.8V, 80mA) - VMEM : supplies external memory and the interface to the external memory on the digital baseband processor (1,8V or 2.8V, 150mA) - VEXT : supplies Radio digital interface and high voltage interface (2.8V, 170mA) - VSIM : supplies the SIM interface circuitry on the digital processor and SIM card...
  • Page 35 3. TECHNICAL BRIEF 3. Battery Charging Block 1. It can be used to charge Lithium Ion and/or Nickel Metal Hydride batteries. Charger initialization, trickle charging, and Li-Ion charging control are implemented in hardware. 2. Charging Process - Check charger is inserted or not - If AD6537B detects that Charger is inserted, the CC-CV charging starts.
  • Page 36 R114 AOUT2P2 SPK_P_SM RCV_N AOUT2N1 AOUT2N2 C143 C144 AOUT3P AUXOP AOUT3N C148 C146 C147 To Headset Speaker Figure 3-20. S5000 HEADSET SPEAKER CIRCUIT (AD6537B) AIN3L AIN3R AIN2P AUXIP AIN2N AUXIN AIN1P VINNORP AIN1N VINNORN From Main VBAT NC_R12 C135 C136...
  • Page 37 3. TECHNICAL BRIEF Figure 3-21. CIRCUIT FOR BATTERY CHARGING AT AD6537B VBAT NC_T15 IBIAS NORMAL NC_R1 CRST VCHARGE CHARGING VMEMSEL C127 GND_NET1 NC_G16 NC_B7 NC_B5 C128 D101 VBATSENSE CUS02 VCHG ISENSE R107 GATEDRIVE TPCF8102-TE85L-F U102 VCHARGE VBAT C703 0.1u Pre-CHARGING R748 Q701 R745...

  • Page 38: Lcd Module

    3. TECHNICAL BRIEF 3.7 LCD MODULE 1.3M Pixel CAMERA 128x160 MAIN OLED-LCD 96x64 SUB OLED LCD FL600 L_DATA00 INOUT_B4 INOUT_A4 L_DATA01 INOUT_B3 INOUT_A3 L_DATA02 INOUT_B2 INOUT_A2 L_DATA03 INOUT_B1 INOUT_A1 ICVE21054E250R401FR FL601 FL602 2V6_CAM L_DATA04 INOUT_A1 INOUT_B1 2V8_MV 2V6_CAM VBAT 1V8_CAM L_DATA05 INOUT_A2 INOUT_B2...

  • Page 39: Camera

    3. TECHNICAL BRIEF 3.8 Camera The CL765A contains various highly-advanced functions such as fully-hardwired JPEG codec, image scaler for digital Zoom Function, MJPEG codec, high-speed Image data processing, OSD and so on. For the system level integration, the CL765A provides various off-chip interfaces including CMOS/CCD camera sensor interface, LCD interface, SD card interface and CCIR601/656 interface for external TV encoder interface.
  • Page 40 3. TECHNICAL BRIEF Figure 3-26. CL765A CAMERA IC CIRCUIT CAMERA IC (CL765A) BACK END LDO 2V6_CAM 1V8_CAM VBAT 2V8_MV VBAT 2V8_VEXT 1V8_MV 2V8_MV U406 MIC2211-GMYML U401 AAT3236IJS-2.8-T1 VOUT1 VOUT2 OUT1 OUT2 C427 C428 C405 C406 C407 C408 C409 4.7u 0.01u 0.1u 0.01u OUT3...

  • Page 41: Keypad Switches And Scanning

    3. TECHNICAL BRIEF 3.9 Keypad Switches and Scanning The key switches are metal domes, which make contact between two concentric pads on the keypad layer of the PCB when pressed. There are 27 switches (Normal Key 24EA, Camera side key, Volume up down side key), connected in a matrix of 5 rows by 5 columns and additional GPIO 35 for KEY_ROW5, as shown in Figure 3-24, except for the power switch (KB1), which is connected independently.

  • Page 42: Microphone

    3. TECHNICAL BRIEF 3.10 Microphone The microphone is placed to the front cover and contacted to main PCB. The audio signal is passed to AIN1P and AIN1N pins of AD6537B. The voltage supply VMIC is output from AD6537B, and is a biased voltage for the AIN1P.

  • Page 43: Headset Interface

    3. TECHNICAL BRIEF 3.12 Headset Interface This phone chooses a 5 pin type headset which has 6 electrodes such as GND, AUXIP, AUXIN (this pin is floating), AUXOP, JACK_DETECT, HOOK_DETECT. This type supports stereo sound Switching from Receiver to Headset Jack If jack is inserted, JACK_DETECT goes from low to high.

  • Page 44: Key Back-Light Illumination

    3. TECHNICAL BRIEF 3.13 Key Back-light Illumination In key back-light illumination, there are 12 Blue LEDs in Main Board, which are driven by KEY_BACKLIGHT signal from AD6527. Figure 3-30. KEY BACK-LIGHT ILLUMINTION KEY BACKLIGHT VBAT VBAT C753 C754 C755 C756 C757 C760 C758...

  • Page 45: Vibrator

    3. TECHNICAL BRIEF 3.14 VIBRATOR The vibrator is placed in the folder cover and contacted to LCD MODULE. The vibrator is driven from VIBRATOR (GPIO_3) of AD6527. Figure 3-32. MOTOR VIBRATOR VBAT VBAT R349 R350 R351 Q301 EMZ2 R352 1.5K VIBRATOR (GPIO 3) R353...

  • Page 46: Bluetooth Section Description

    3. TECHNICAL BRIEF 3.15 Bluetooth Section Description (M700) BLUETOOTH VBAT 2V8_VBT BT700 AMAN542012_2442 U701 MIC5252-2.8BML R733 R724 (GPIO_2) BT_EN FEED GND2 GND1 PGND R736 R737 C726 C714 C752 C750 C751 C713 0.01u 2.2u 2V8_VBT 2V8_VBT C715 0.1u U702 TC7SH08FS M700 LBMA-2C67B2 PCM_TX R725...

  • Page 47: Bluetooth Circuit Description

    3. TECHNICAL BRIEF 3.16.1 Bluetooth Circuit Description (M700) Bluetooth Module Features - Output power(Class2) : 1.0 dBm Typ. - Receiver Sensitivity : -83 dBm Max. - Dimensions : 6.9*7.9*1.5 (unit: mm) - Wide operating temperature range(Target) : -40 to85C (Storage: -40 to 100C) - D.C Supply voltage range : 1.8V or 3.0V(Nominal) - Interfaces : UART and SPI for data and PCM for voice - Stack layer : HCI or RFCOMM...

  • Page 48: Trouble Shooting

    4. TROUBLE SHOOTING 4. TROUBLE SHOOTING 4.1 RF Component Test Points FL500 U501 SW500 U500 X500 U502 U503 Figure 4-1 U500 Power Amp Module(AWT6171) U501 RF Main Chip (SI4210) U502 Inverter U503 2.85V Regulator X500 VCTXO, 26MHz Clock FL500 SW500 Mobile Switch - 49 -...

  • Page 49: Rx Trouble

    4. TROUBLE SHOOTING 4.2 RX Trouble Checking Flow START HP8960 : Test mode 62 CH, 7 level setting (TCH) 62CH, -60dBm setting (BCCH) Spectrum analyzer setting Oscilloscope setting (1) Check regulator circuit (2) Check VCTCXO (3) Check Mobile SW &FEM (4) Check RX IQ Redownload SW or...
  • Page 50 4. TROUBLE SHOOTING (1) Checking Regulator Circuit Test Points U503. 5 (OUT) U503 U503. 3 (EN) Figure 4-2 CIRCUIT VBAT RF2V85 RF LDO U503 MIC5255-2.85BM5 R517 CLKON C544 C545 C546 R518 100K 0.01u 4.7u Checking Flow Voltage at Level at Change main board Pin5 of U503 Pin3 of U503...
  • Page 51 4. TROUBLE SHOOTING (2) Checking VCTCXO Circuit Test Points Checking Flow X500.4 (VCC) VCTCXO Circuit is OK VCTCXO Circuit is OK Check Pin 3. 26 MHzO.K? See next Page to check See next Page to check Refer to Graph 4 -1(b) Mobile SW Mobile SW X500...
  • Page 52 4. TROUBLE SHOOTING (3) Checking Mobile SW & FEM Test Points SW500.ANT SW500.RF SW500 FL500 VC_DCSPCS VC_EGSM Figure 4-4 Circuit Diagram Waveform TP500 TP501 TP502 C509 R504 FL301. 10 3.9nH C513 VC_DCSPCS C501 KMS-506 SW500 VC_EGSM L500 C520 GND13 PCS_RX2 ANT SW Control GSM&...
  • Page 53 4. TROUBLE SHOOTING Checking Flow For these 2 test case, No Call connection is needed Check SW500 Pin ANT,RF Changing SW500 Open with RF Cable connected. Check SW500 Pin ANT,RF Changing SW500 Short with No RF Cable Connected Check C539,C540 VC1 :Low Changing the Board.
  • Page 54 4. TROUBLE SHOOTING (4) Checking RX IQ Test Points CIRCUIT C525 U501 C522 XOUT C524 C527 Figure 4-5 Waveform Graph 4-3 Checking Flow Check C522,C524. Check if there is any Similar? Replace U501 Major difference Refer to graph 4-3 Redownload software and calibration again - 55 -...

  • Page 55: Tx Trouble

    4. TROUBLE SHOOTING 4.3 TX Trouble Checking Flow START HP8960 : Test mode 62 CH, 7 level setting (TCH) 62CH, -60dBm setting (BCCH) Spectrum analyzer setting Oscilloscope setting (1)Check regulator circuit (2)Check VCTCXO (3)Check Mobile SW & FEM (4)Check PAM control signal (5)Check TX IQ...
  • Page 56 4. TROUBLE SHOOTING (1) Checking Regulator Circuit Test Points U503. 5 (OUT) U503 U503. 3 (EN) Figure 4-8 CIRCUIT VBAT RF2V85 RF LDO U503 MIC5255-2.85BM5 R517 CLKON R518 C544 C545 C546 100K 0.01u 4.7u Checking Flow Voltage at Level at Change main board Pin5 of U503 Pin3 of U503...
  • Page 57 4. TROUBLE SHOOTING (2) Checking VCTCXO Circuit Test Points Checking Flow X500.4 (VCC) VCTCXO Circuit is OK VCTCXO Circuit is OK Check Pin 3. 26 MHzO.K? See next Page to check See next Page to check Refer to Graph 4 -1(b) Mobile SW Mobile SW 2.75V OK?
  • Page 58 4. TROUBLE SHOOTING (3) Checking Mobile SW & FEM Test Points SW500.ANT SW500.RF SW500 FL500 VC_DCSPCS VC_EGSM Figure 4-8 CIRCUIT Waveform TP500 TP501 TP502 C509 R504 3.9nH C513 C501 KMS-506 SW500 L500 C520 Graph 4-5(a) GSM Tx mode GND13 PCS_RX2 GND12 PCS_RX1 GND11...
  • Page 59 4. TROUBLE SHOOTING Checking Flow For the test, TX Stand alone Mode is needed. Refer to chapter 11 (PL=7 for GSM, PL=2 for DCS) Check C539,C540 Check whether Ant SW Check VC_EGSM, Changing board Set as TX mode VC_DCSPCS RRefer to Graph4-6 RRefer to Table 6-11 Check RF Level of Pin5 : ~29.5dBm...
  • Page 60 4. TROUBLE SHOOTING (4) Checking PAM Control Signal Test Points CIRCUIT VBAT R500 U500 PA_BAND (GPO_17) C552 R501 2.7p PA_EN (GPO_16) R502 TX_RAMP C504 C505 C506 1000p 1000p C554 1000p C515 R507 DCS_PCS_IN R502 RF2V85 2V8_VEXT R508 R509 U500 GSM_IN AWT6171R TX_EN (TX_RAMP)
  • Page 61 4. TROUBLE SHOOTING (5) Checking TX IQ Test Points Waveform C522 U501 C524 Graph 4-7 Figure 4-10 CIRCUIT C522 XOUT C524 Checking Flow Check if there is Replace U101 Similar? Any Major Difference Refer to Graph 4 -8 Redownload the Software And calibrate - 62 -...

  • Page 62: Power On Trouble

    4. TROUBLE SHOOTING 4.4 Power On Trouble Test Points C119 (1V8_VRTC) C125 (2V75_VVCXO ) C122 (2V5_VMIC) C117 (1V8_VCORE) C120 (2V85_VSIM ) C118 (2V8_VM EM) Figure 4-11 CIRCUIT R102 BACK_BATT C116 C117 4.7u VCORE1 VCORE2 C118 4.7u VMEM1 VMEM2 C119 VRTC C120 VSIM C121...
  • Page 63 4. TROUBLE SHOOTING Test Points C701 R739 M201 M700 R724 C719 C714 R733 C752 R701 VBAT 2V8_VBT BT700 AMAN542012_2442 U701 MIC5252-2.8BML R733 R724 (GPIO_2) BT_EN FEED GND2 GND1 PGND R736 R737 C726 C714 C752 C750 C751 C713 0.01u 2.2u 2V8_VBT 2V8_VBT C715 0.1u...
  • Page 64 4. TROUBLE SHOOTING Checking Flow Bluettooth Power on Replace U101 Replace U103 2V8_VBT 2V8_VBT Replace at C714,C7 BT_EN at R724 =2.8V ? at C701 =2.8V ? U103 Check PCB Replace pattern U701 - 65 -...
  • Page 65 4. TROUBLE SHOOTING Replace U101 Resolder Replace M700 Replace U101 Not available IF RF level at Antenna Is soldering of R218, Resolder Connect BT Headset Feeding about 0dBm? L750 good? Replace Replace Headset M700 - 66 -...
  • Page 66 4. TROUBLE SHOOTING Establish a call Replace U103 Replace M700 Software Re_download - 67 -...
  • Page 67 4. TROUBLE SHOOTING Checking Flow START Check Battery Voltage Charge or Change Battery > 3.35V Push power-on key Check the contact of power key And check the level change Or dome-switch of PWRKEY Check the voltage of Replace U101 The LDO outputs at U101 VCORE=1.8V VVCXO=2.75V VMEM=2.8V...

  • Page 68: Charging Trouble

    4. TROUBLE SHOOTING 4.5 Charging Trouble Test Points D101 R107 U102 R103 C127 Figure 4-12 CIRCUIT VBAT NC_T15 IBIAS NC_R1 CRST VCHARGE VMEMSEL GND_NET1 C127 NC_G16 NC_B7 NC_B5 C128 D101 VBATSENSE CUS02 VCHG ISENSE R107 GATEDRIVE TPCF8102-TE85L-F U102 - 69 -...
  • Page 69 4. TROUBLE SHOOTING Checking Flow START Resolder the CN301 I/O Connector(CN301) Pin 4,5 : VCHARGE Is well-soldered ? Pin12,19 : GND The TA is out of order Voltage at anode of Change the TA D101 = 5.2V ? Resolder the U102,D101,R103 are U102, D101, R103 well-soldered?

  • Page 70: Vibrator Trouble

    4. TROUBLE SHOOTING 4.6 Vibrator Trouble Test Points Q301.6 Q301.1 R353 Q301 R352 Q301.3 R350 (Q301.2 ) Soldering Check in LCD Module Figure 4-13 CIRCUIT VBAT VBAT R349 R350 R351 Q301 EMZ2 R352 1.5K VIBRATOR (GPIO 3) R353 +MOTOR D301 C313 4.7u 1SS352-TPH3_F...
  • Page 71 4. TROUBLE SHOOTING Checking Flow SETTING : Enter the engineering mode, and set vibrator on at vibration of BB test menu START Is the voltage at pin 3 Check the soldering of R352, R353 of Q301 high ? Resolder R352, R353 Check the soldering Is the voltage at pin 2 of R350...

  • Page 72: Lcd Trouble

    4. TROUBLE SHOOTING 4.7 LCD Trouble Test Points FL609 FL607 CN601 FL601 FL608 FL605 FL606 LCD Module connection connector( 60Pin, female ) LCD Module Camera Module connection Connector ( 24Pin, female ) Figure 4-15 - 73 -...
  • Page 73 4. TROUBLE SHOOTING Checking Flow START Is the connection of FPCB with connector on Reassemble FPCB with CN601 connector PCB(CN601) ok ? Check the connection LCD Reassemble LCD module with connector on FPCB module with connector On FPCB ? Check the soldering of Resoldering CN601 CN601 ? Change the FPCB and try again...

  • Page 74: Camera Trouble

    4. TROUBLE SHOOTING 4.8 Camera Trouble Test Points U406 FL609 FL608 FL605 FL606 U404 (2V5_CAM) U408 Figure 4-16 Camera Module Connector ( 20Pin, male ) Camera Module Figure 4-17 - 75 -...
  • Page 75 4. TROUBLE SHOOTING Checking Flow START Does the LCD itself Go to the LCD trouble Has no trouble ? Replace the U400 Change the camera Check the voltage Check the voltage module, Does it work of pin 3 of of pin 1 of properly ? U406 is 3V ? U406 LOW ?

  • Page 76: Speaker Trouble

    4. TROUBLE SHOOTING 4.9 Speaker Trouble Test Points C219 C220(SPOUT2) (SPOUT1) U206 U202 Soldering Check Figure 4-18 CIRCUIT MIDI (40POLY) C217 U202 0.1u YMU762C-QZE2 SPK_P_SM R232 13M_CLK CLK1 HPOUT_R R216 C218 (GPIO_12) _MIDI_RST _RST HPOUT_L 0.01u ADD00 R217 (NAUXCS1) _MIDI_CS VBAT C231 R218...
  • Page 77 4. TROUBLE SHOOTING Checking Flow START Voltage across C226 Replace C226 Check the soldering of = 2.85V? C226 Re-soldering C226 Check the soldering of Re-soldering C228, C229 C228, C229 Re-solder C228, Check the signal level of C229 or Replace C228, C229 U202 Check the state of Replace speaker...

  • Page 78: Sim Card Interface Trouble

    4. TROUBLE SHOOTING 4.10 SIM Card Interface Trouble Test Points J301 Figure 4-19 CIRCUIT SIM CONNECTOR 2V85_VSIM 2V85_VSIM R348 J301 SIM_RST SIM_DATA SIM_CLK - 79 -...
  • Page 79 4. TROUBLE SHOOTING Checking Flow START Change the SIM Card. Our phone Does the SIM cards supports only 3V SIM card. supports 3V ? Voltage output Voltage at pin1 of Resolder J301 of VSIM LDO J301 is 2.85V? Is 2.85V? Replace J301 Change the SIM Card Redownload SW.

  • Page 80: Earphone Trouble

    4. TROUBLE SHOOTING 4.11 Earphone Trouble Test Points C200 C209 R209 U200 J201 U201 Figure 4-20 CIRCUIT HEADSET JACK 2V8_MV 2V5_JACK U200 2V5_JACK VOUT C201 NCP563Q25T1 C200 R201 C202 R202 0.1u R230 1.5K R203 (GPIO_40) AUXIN HOOK_DETECT C207 R205 C205 C206 2V8_MV 2V8_MV...
  • Page 81 4. TROUBLE SHOOTING Checking Flow START Resolder J201 Does the audio Level at pin1 profile of the phone Replace U201 of U201 is high change to the earphone mode? Resolder component Set the audio part of the test equipment to Download software Set the audio part of the test Change the earphone...

  • Page 82: Key Backlight Trouble

    4. TROUBLE SHOOTING 4.12 KEY backlight Trouble Test Points Figure 4-21 - 83 -...

  • Page 83: Key Backlight

    4. TROUBLE SHOOTING CIRCUIT KEY BACKLIGHT VBAT VBAT C753 C754 C755 C756 C757 C760 C758 C759 C761 C762 C763 C764 C765 C766 IMX9T110 Q700 R728 KEY_BACKLIGHT C724 C725 Checking Flow START Is the level at R729 Check U101 High? Are all LEDs Check the soldering Working? each R and LED...

  • Page 84: Receiver Trouble

    4. TROUBLE SHOOTING 4.13 Receiver Trouble Test Points R114 C603 C604 R111 Figure 4-22 CIRCUIT R112 AOUT1P RCV_P C142 AOUT1N AOUT2P1 R114 AOUT2P2 SPK_P_SM RCV_N AOUT2N1 AOUT2N2 C143 C144 AOUT3P AUXOP AOUT3N C148 C146 C147 - 85 -...
  • Page 85 4. TROUBLE SHOOTING Checking Flow SETTING : After initialize Agilent 8960, Test EGSM, DCS mode Set the property of audio as PRBS or continuous wave. Set the receiving volume of mobile as Max. START Does waveform at Replace main board R112 and R114 fluctuate? Is CN601 connected...

  • Page 86: Microphone Trouble

    4. TROUBLE SHOOTING 4.14 Microphone Trouble Test Points C201 R210 R231 U102 C213 R207 R103 Figure 4-23 CIRCUIT 2V5_VMIC CLOSE TO MIC R200 R204 C203 C204 SOB-413S44-RC3310 2.2K R231 R207 VINNORP MIC200 C210 C233 C213 R210 VINNORN 0.1u R214 C215 C216 2.2K - 87 -...
  • Page 87 4. TROUBLE SHOOTING Checking Flow SETTING : After initialize Agilent 8960, Test EGSM, DCS mode START Voltage across C233 Voltage VMIC of U101 Replace U101 = DC 2.5V ? = DC 2.5V? Resolder R200 & R204. Check the signal Level at each side Replace microphone of MIC200.

  • Page 88: Rtc Trouble

    4. TROUBLE SHOOTING 4.15 RTC Trouble Test Points X101 R110 Figure 4-24 CIRCUIT NGPCS1 _MIDI_CS NAUXCS1 _LCD_CS GPIO_42_NMAIN_LCD_CS _SUB_CS GPIO_43_NSUB_LCD_CS C132 C133 26M_DBB CLKIN X101 CLKON CLKON OSCOUT R110 OSCIN PWRON NRESET MC-146_7pF C134 32.768KHz GPIO_0_IRDA_TX GPIO_1_IRDA_RX - 89 -...

  • Page 89: Indication Led Trouble

    4. TROUBLE SHOOTING 4.16 Indication LED Trouble Test Points 2V8_VEXT LOW(R410) Q404 2V8_VEXT HIGH(R410) R410 R404 LD40 0 U405 R409 R405 R406 Figure 4-25 CIRCUIT INDICATOR LED VBAT R404 R405 C421 VCHARGE VBAT LD400 SML-521MUWT86 GREEN U405 NLAST4599DFT2G 6 NO INDLED_R (GPO_8) INDLED_G...

  • Page 90: Folder On/Off Trouble

    4. TROUBLE SHOOTING 4.17 Folder on/off Trouble Test Points (FB101) (C403) (R412) U403 Figure 4-26 CIRCUIT FLIP SWITCH 2V8_VEXT R412 100K FLIP (GPIO_5) OUTPUT C403 C404 GND2 PGND GND1 0.1u 0.01u U403 A3212EEH-T - 91 -...

  • Page 91: Download And Calibration

    5. DOWNLOAD AND CALIBRATION 5. DOWNLOAD AND CALIBRATION 5.1 Download A. Download Setup Figure 5-1 describes Download setup UART (If you have battery, no TA is needed) Figure 5-1. Download Setup - 92 -...
  • Page 92 5. DOWNLOAD AND CALIBRATION B. Download Procedure 1. Create a new folder on C: Drive as below after downloading GSMULTI program on GCSC. 2. Execute by double- click 1. Execute by double- click 2. Execution and Configuration Setting 2. Select *.dll file equivalent to the 1.
  • Page 93 5. DOWNLOAD AND CALIBRATION 3. Click ‘Start’ button and then connect the phone and the cable. " START " BTN Click - 94 -...
  • Page 94 5. DOWNLOAD AND CALIBRATION C. Configuration Setting Information Model DLL File select (C:\GSMULTI\Model) Phone Software select (mot,m0 file) TI RAM Loader ( Only TI Model ADI Model : Donít care) Download speed (bps ) Start Com port End Com port Frame count select ìHermesîselect in case TMO DG200...

  • Page 95: Calibration

    5. DOWNLOAD AND CALIBRATION 5.2 Calibration A. Equipment List Table 5-1. Calibration Equipment List. Equipment for Calibration Type / Model Brand Wireless Communication Test Set HP-8960 Agilent RS-232 Cable and Test JIG RF Cable Power Supply HP-66311B Agilent GPIO interface card HP-GPIB Agilent Calibration &...
  • Page 96 5. DOWNLOAD AND CALIBRATION JTAG2 JTAG1 Status ADI-REMOTE TI-REMOTE POWER VBAT UART Status POWER Figure 5-3 The top view of Test JIG C. Test Jig Operation Table 5-2 Jig Power Power Source Description Power Supply usually 4.0V Travel Adaptor Use TA, name is TA-20G(24pin) Table 5-3 Jig DIP Switch Switch Number Name...
  • Page 97 5. DOWNLOAD AND CALIBRATION Table 5-4 LED Description LED Number Name Description LED 1 Power Power is provided for Test Jig LED 2 Indicate charging state of the phone battery LED 3 UART Indicate data transfer state through the UART port LED 4 Indicate data transfer state through the MON port 1.
  • Page 98 5. DOWNLOAD AND CALIBRATION E. Download Procedure 1. Create a new folder as below after downloading ‘Hotkimchi’ program on GCSC. 2. Set up the “C:/CAL/Hot_Kimchi” 3. ‘Info_DB’ file and Configuration setting Ex) Model : C1100 - 99 -...
  • Page 99 5. DOWNLOAD AND CALIBRATION -. To set up Data route, info_Db.TXT should be edited. -. The names in the cycle should be same. 4. Run file name is “Hot_kinchiD.exe” 5. Choose the Model name of mobile phone. 6. Push the “APPLY” button. and push the “CALIBRATION START” button. 7.
  • Page 100 5. DOWNLOAD AND CALIBRATION 8. Push the “START” button. Cable Loss : Enter the RF cable loss GSM and DCS - 101 -...
  • Page 101 5. DOWNLOAD AND CALIBRATION 9. Phone test Finish is shown in below screen. - 102 -...

  • Page 102: Block Diagram

    6. BLOCK DIAGRAM 6. BLOCK DIAGRAM - 103 -...
  • Page 103 - 104 -...

  • Page 104: Circuit Diagram

    USB BOOT INT CLOCK Approved KEY_COL2 KEYPADCOL2 USC4 USC4 YOON CHANG WON USB BOOT EXT CLOCK KEY_COL3 KEYPADCOL3 USC5 USC5 KEY_COL4 KEYPADCOL4 USC6 USC6 DRAWING Iss. Notice No. Date Name VER.1.0 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 105 -...
  • Page 105 2 / 7 2005 VSS6 _RST _RESET VSS7 WAIT _WAIT VSS8 BURSTCLK Checked LEE GI SUNG DRAWING AUDIO/SOUND/MEMORY NAME Approved YOON CHANG WON DRAWING Iss. Notice No. Date Name VER.1.0 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 106 -...
  • Page 106 3 / 7 2005 +MOTOR Checked D301 C313 HA SUNG WOO DRAWING 4.7u KEY, IO, SIM, VIBRATOR NAME 1SS352-TPH3_F Approved YOON CHANG WON -MOTOR DRAWING Iss. Notice No. Date Name VER.1.0 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 107 -...

  • Page 107: Flip Switch

    2005 0.1u Q404 R409 C429 R410 2.7K 0.1u EMH10 Checked LEE GI SUNG 100K DRAWING CAMERA / Chargepump NAME Approved YOON CHANG WON DRAWING Iss. Notice No. Date Name VER.1.0 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 108 -...
  • Page 108 JUNG HYUN CHAE 5 / 7 GSM_RX 2005 DCS_RX Checked LEE GI SUNG DRAWING PCS_RX RF(Aero II / ANADIGICS) NAME Approved YOON CHANG WON DRAWING Iss. Notice No. Date Name VER.1.0 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 109 -...
  • Page 109 08/16 Designer JUNG HYUN CHAE 6 / 7 2005 Checked HA SUNG WOO DRAWING CAMERA / LCD CONNECTOR NAME Approved YOON CHANG WON DRAWING Iss. Notice No. Date Name VER.1.0 LG Electronics Inc. LGIC(42)-A-5505-10:01 LG Electronics Inc. - 110 -...
  • Page 110 LG-S5000 08/16 Designer JUNG HYUN CHAE 7 / 7 2005 Checked LEE GI SUNG DRAWING CHARGING / BLUETOOTH NAME Approved YOON CHANG WON DRAWING Iss. Notice No. Date Name VER.1.0 LG Electronics Inc. LG Electronics Inc. LGIC(42)-A-5505-10:01 - 111 -...

  • Page 111: Pcb Layout

    8. PCB LAYOUT - 112 -...
  • Page 112 8. PCB LAYOUT - 113 -...
  • Page 113 - 114 -...

  • Page 114: Engineering Mode

    9. ENGINEERING MODE 9. ENGINEERING MODE A. About Engineering Mode Engineering mode is designed to allow a service man/engineer to view and test the basic functions provided by a handset. B. Access Codes The key sequence for switching the engineering mode on is 2945#*#. Pressing END will switch back to non-engineering mode operation.

  • Page 115: Bb Test [Menu 1]

    9. ENGINEERING MODE 9.1 BB Test [MENU 1] 9.1.1 LCD 1) COLOUR : WHITE, RED, GREEN, BLUE, BLACK 9.1.2 CAMERA This menu is to test the Camera. 1) Main LCD preview : It shows the picture on Main LCD. 2) Sub LCD preview : It shows the picture on Sub LCD. 3) Flash on : It turns on the Flash LED.
  • Page 116 9. ENGINEERING MODE 9.1.7 ADC (Analog to Digital Converter) This displays the value of each ADC. 1) MVBAT ADC : Main Voltage Battery ADC 2) AUX ADC : Auxiliary ADC 3) TEMPER ADC : Temperature ADC 9.1.8 BATTERY 1) Bat Cal : This displays the value of Battery Calibration. The following menus are displayed in order : BAT_LEV_4V, BAT_LEV_3_LIMIT, BAT_LEV_2_LIMIT, BAT_LEV_1_LIMIT, BAT_IDLE_LI MIT, BAT_INCALL_LIMIT, SHUT_DOWN_VOLTAGE, BAT_RECHARGE_LMT...

  • Page 117: Rf Test [Menu 2]

    9. ENGINEERING MODE 9.2 RF Test [MENU 2] 9.2.1 SAR test This menu is to test the Specific Absorption Rate. 1) SAR test on : Phone continuously process TX only. Call-setup equipment is not required. 2) SAR test off : TX process off 9.3 MF mode [MENU 3] This manufacturing mode is designed to do the baseband test automatically.

  • Page 118: Trace Option [Menu 4]

    9. ENGINEERING MODE 9.4 Trace option [MENU 4] This is NOT a necessary menu to be used by neither engineers nor users. 9.5 Call timer [MENU 5] This menu is to set the Digital Audio Interface Mode for Speech Transcoder and Acoustic testing. 1) All calls : This displays total conversation time.

  • Page 119: Stand Alone Test

    10. STAND ALONE TEST 10. STAND ALONE TEST 10.1 Introduction This manual explains how to examine the status of RX and TX of the model. A. Tx Test TX test - this is to see if the transmitter of the phones is activating normally. B.

  • Page 120: Means Of Test

    10. STAND ALONE TEST 10.3 Means of Test a. Select a COM port b. Set the values in Tx or Rx c. Select band and channel d. After setting them all above, press connect button. e. Press the start button Figure 10-1.
  • Page 121 10. STAND ALONE TEST Figure 10-2. HW test setting Figure 10-3. Ramping profile - 122 -...

  • Page 122: Auto Calibration

    11. AUTO CALIBRATION 11. AUTO CALIBRATION 11.1 Overview Autocal (Auto Calibration) is the PC side Calibration tool that perform Tx ,Rx and Battery Calibration with Agilent 8960(GSM call setting instrument) and Tektronix PS2521G(Programmable Power supply). Autocal generate calibration data by communicating with phone and measuring equipment then write it into calibration data block of flash memory in GSM phone.
  • Page 123 11. AUTO CALIBRATION Figure 11-1. Auto Calibration Program Screen > Cable loss : Enter the RF cable loss GSM and DCS Screen > GPIB(Primary address) : Enter the SS(Ag8960) and PS(Tektronix PS2521G) GPIB address Screen > ADC Channel : Default ADC Calibration Channel Screen >...

  • Page 124: Agc

    11. AUTO CALIBRATION 11.4 AGC This procedure is for Rx calibration. In this procedure, We can get RSSI correction value. Set band EGSM and press Start button the result window will show correction values per every power level and gain code and the same measure is performed per every frequency.
  • Page 125 - 126 -...
  • Page 126 - 127 -...

  • Page 127: Exploded View & Replacement Part List

    12. EXPLODED VIEW & REPLACEMENT PART LIST 12.1 EXPLODED VIEW - 128 -...
  • Page 128 12. EXPLODED VIEW & REPLACEMENT PART LIST - 129 -...
  • Page 129 - 130 -...

  • Page 130: Replacement Parts

    Black FOLDER(LOWER) MCJH00 COVER,FOLDER(LOWER) MCJH0029302 Starlit Back Black MGBY00 GAUZE MGBY0003401 Black MMAA00 MAGNET,SWITCH MMAA0000601 LG-G510,511,512 common use, DIA : 3.0mm+1.5t Silver MPBG00 PAD,LCD MPBG0037701 Black MPBZ00 MPBZ0108601 EVA SPONGE (4.8T) + TAPE 0.05T Black Without MTAD00 TAPE,WINDOW MTAD0040701 Color...
  • Page 131 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark Without MWAF00 WINDOW,LCD(SUB) MWAF0030702 Color Without MCCZ00 MCCZ0014501 Color MCJJ00 COVER,FOLDER(UPPER) MCJJ0036402 Starlit Black Black Without MDAD00 DECO,CAMERA MDAD0015201 Black ion plating Color MGAZ01 GASKET MGAZ0019002 LCD,SIDE-2t Gold...
  • Page 132 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark Without MWAH00 WINDOW,FLASH MWAH0002501 Color ACGK00 COVER ASSY,FRONT ACGK0058402 Black MBHY00 BUMPER MBHY0015102 Black MBJL00 BUTTON,SIDE MBJL0025602 Starlit Black Black Without MBJP00 BUTTON,SHUTTER MBJP0003202 MP3 / CAMERA Color MCCC00 CAP,EARPHONE JACK...
  • Page 133 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark ACGM00 COVER ASSY,REAR ACGM0059202 Black GMEY00 SCREW MACHINE,BIND GMEY0003901 1.4 mm,2.5 mm,MSWR3(BK) ,B ,+ ,HEAD D2.7 Silver MCJN00 COVER,REAR MCJN0042401 Starlit Black Black MGAZ01 GASKET MGAZ0019003 IO,CONNECTOR Gold...

  • Page 134: Main Component

    24 PIN,0.4 mm,STRAIGHT , ,H1.5, MALE BOARD CONNECTOR,BOARD TO ENBY02 ENBY0020201 40 PIN,0.4 mm,ETC , ,H=0.9, Header BOARD SPCY00 PCB,FLEXIBLE SPCY0061801 POLYI ,0.6 mm,MULTI-6 ,S5000 LCD FPCB SJMY01 VIBRATOR,MOTOR SJMY0006503 3 V,0.08 A,10*3.45 ,17mm double tape SUSY01 SPEAKER SUSY0006207 ASSY ,8 ohm,92 dB,17 mm,5T SVCY00...
  • Page 135 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C101 CAP,CERAMIC,CHIP ECCH0000163 47 nF,10V,K,X5R,HD,1005,R/TP C102 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C103 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C104 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C105 CAP,CERAMIC,CHIP ECCH0000167 0.1 uF,6.3V,K,X5R,HD,1005,R/TP C106 CAP,CERAMIC,CHIP ECCH0000167...
  • Page 136 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C138 CAP,CERAMIC,CHIP ECCH0000120 39 pF,50V,J,NP0,TC,1005,R/TP C139 CAP,CERAMIC,CHIP ECCH0004903 1 uF,6.3V ,Z ,Y5V ,TC ,1005 ,R/TP C140 CAP,CERAMIC,CHIP ECCH0004903 1 uF,6.3V ,Z ,Y5V ,TC ,1005 ,R/TP C141 CAP,CERAMIC,CHIP ECCH0004903...
  • Page 137 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C230 CAP,CERAMIC,CHIP ECCH0000127 82 pF,50V,J,NP0,TC,1005,R/TP C231 CAP,CERAMIC,CHIP ECCH0000138 390 pF,50V,K,X7R,HD,1005,R/TP C232 CAP,CERAMIC,CHIP ECCH0000127 82 pF,50V,J,NP0,TC,1005,R/TP C235 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP C236 CAP,CERAMIC,CHIP ECCH0004904...
  • Page 138 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C419 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP C420 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP C421 CAP,CERAMIC,CHIP ECCH0000117 27 pF,50V,J,NP0,TC,1005,R/TP C422 CAP,CERAMIC,CHIP ECCH0000167...
  • Page 139 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C526 CAP,CERAMIC,CHIP ECCH0000103 1.5 pF,50V,C,NP0,TC,1005,R/TP C527 CAP,CERAMIC,CHIP ECCH0000103 1.5 pF,50V,C,NP0,TC,1005,R/TP C528 CAP,CERAMIC,CHIP ECCH0000117 27 pF,50V,J,NP0,TC,1005,R/TP C529 CAP,CERAMIC,CHIP ECCH0000117 27 pF,50V,J,NP0,TC,1005,R/TP C530 CAP,CERAMIC,CHIP ECCH0000117 27 pF,50V,J,NP0,TC,1005,R/TP C531 CAP,CERAMIC,CHIP ECCH0000103...
  • Page 140 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C609 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP C700 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP C701 CAP,CERAMIC,CHIP ECCH0005801 2.2 uF,6.3V ,K ,X5R ,TC ,1608 ,R/TP C702 CAP,CERAMIC,CHIP ECCH0005801...
  • Page 141 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark SMD ,18 V, ,SMD ,4ch. R-Varistor Array(50Ohm,15pF), Pb- FL607 FILTER,EMI/POWER SFEY0007103 free SMD ,18 V, ,SMD ,4ch. R-Varistor Array(50Ohm,15pF), Pb- FL608 FILTER,EMI/POWER SFEY0007103 free FL609 FILTER,EMI/POWER SFEY0007102 SMD ,5.6 V,SMD ,4ch.
  • Page 142 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark R118 RES,CHIP ERHY0000254 4.7K ohm,1/16W,J,1005,R/TP R119 RES,CHIP ERHY0000230 330 ohm,1/16W,J,1005,R/TP R120 RES,CHIP ERHY0000101 0 ohm,1/16W,F,1005,R/TP R201 RES,CHIP ERHY0000241 1K ohm,1/16W,J,1005,R/TP R202 RES,CHIP ERHY0000265 20K ohm,1/16W,J,1005,R/TP R203 RES,CHIP ERHY0000201...
  • Page 143 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark R321 RES,CHIP ERHY0000220 100 ohm,1/16W,J,1005,R/TP R322 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R324 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R325 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R326 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R328 RES,CHIP ERHY0000213...
  • Page 144 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark R502 RES,CHIP ERHY0000261 10K ohm,1/16W,J,1005,R/TP R503 RES,CHIP ERHY0000206 18 ohm,1/16W,J,1005,R/TP R504 INDUCTOR,CHIP ELCH0005012 3.9 nH,S ,1005 ,R/TP , R505 RES,CHIP,MAKER ERHZ0000263 300 ohm,1/16W ,F ,1005 ,R/TP R506 RES,CHIP,MAKER ERHZ0000263...
  • Page 145 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark R735 RES,CHIP ERHY0000203 10 ohm,1/16W,J,1005,R/TP R738 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R739 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R741 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R742 RES,CHIP ERHY0000213 47 ohm,1/16W,J,1005,R/TP R743 RES,CHIP ERHY0000213...
  • Page 146 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark MLF ,10 PIN,R/TP ,Dual(1.8V/150mA,2.8V/300mA) LDO U406 EUSY0154410 Regulator U408 EUSY0151908 SC70JW8 ,8 PIN,R/TP ,150mA, 1.8V LDO Regulator U500 SMPY0010401 35 dBm,56 %, A, dBc, dB,6X6 ,SMD ,QBAND PAM U501 EUSY0223201 5.0*5.0 ,32 PIN,R/TP ,AERO11 TRANSCEIVER...
  • Page 147 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark C754 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP C755 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP C756 CAP,CERAMIC,CHIP ECCH0004904 1 uF,6.3V ,K ,X5R ,TC ,1005 ,R/TP C757 CAP,CERAMIC,CHIP ECCH0004904...
  • Page 148 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark R214 RES,CHIP ERHY0000247 2.2K ohm,1/16W,J,1005,R/TP R317 RES,CHIP ERHY0000261 10K ohm,1/16W,J,1005,R/TP R318 RES,CHIP ERHY0000201 0 ohm,1/16W,J,1005,R/TP R323 RES,CHIP ERHY0000237 680 ohm,1/16W,J,1005,R/TP R329 RES,CHIP ERHY0000237 680 ohm,1/16W,J,1005,R/TP R333 RES,CHIP ERHY0000237...
  • Page 149 12. EXPLODED VIEW & REPLACEMENT PART LIST Location Level Description Part Number Specification Color Remark VA200 VARISTOR SEVY0003901 5.5 V, ,SMD ,480pF, 1005 VA202 VARISTOR SEVY0003901 5.5 V, ,SMD ,480pF, 1005 VA310 VARISTOR SEVY0000702 14 V,10% ,SMD , VA311 VARISTOR SEVY0000702 14 V,10% ,SMD , SPFY00...

  • Page 150: Accessory

    MCHZ00 COMPACT DISK MCHZ0008001 BLACK MHBY00 HANDSTRAP MHBY0002101 T5100 RUSSV Square Coupling, Cow Leather Metal Silver 3.7 V,1000 mAh,1 CELL,PRISMATIC ,LG-G232 SBPL00 BATTERY PACK,LI-ION SBPL0076324 BATTERY(CHINA LABEL) SGDY00 DATA CABLE SGDY0005601 DK-40G ,K8000 24PIN I/O + USB A TYPE SGEY01...

Table of Contents