Configuring Powerconnect Switch B - Dell M6220 User Configuration Manual
Hide thumbs
Also See for M6220:
- Getting started manual (182 pages) ,
- Configuration manual (126 pages) ,
- Cli reference manual (1152 pages)
Table of Contents
Advertisement
Configuring PowerConnect Switch B
To configure Switch B:
1 Enable routing on the switch.
console#configure
console(config)#ip routing
2 Assign an IP address to VLAN 20. This command also enables IP routing
on the VLAN.
console#configure
console(config)#interface vlan 20
console(config-if-vlan20)#ip address 192.168.20.25
255.255.255.0
console(config-if-vlan20)#exit
3 Assign an IP address to VLAN 30. This command also enables IP routing
on the VLAN.
console#configure
console(config)#interface vlan 30
console(config-if-vlan30)#ip address 192.168.30.30
255.255.255.0
console(config-if-vlan30)#exit
4 Configure the VLAN 20 routing interface on Switch A as the default
gateway so that any traffic with an unknown destination is sent to
Switch A for forwarding.
console(config)#ip route default 192.168.20.20
930
Configuring IP Routing
- Quick Links:
- Simple Mode
Hide quick links:
Advertisement
Table of Contents
