Table of Contents
Advertisement
7. To install the new M.2 solid-state drive, do the following:
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then carefully
insert the M.2 solid-state drive into the slot at an angle of about 20 degrees
M.2 solid-state drive downward
b. Install the screw to secure the M.2 solid-state drive in place
8. Reinstall the base cover assembly.
9. Reinstall the removable battery.
10. Turn the computer over. Connect the ac power adapter and all cables to the computer.
Replacing the dc-in cable and dc-in bracket
Before you start, read "Important safety information" on page v and print the following instructions.
114
T570 and P51s User Guide
2
.
1
. Pivot the new
3
.
- Quick Links:
- Plugs and Outlets
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
