Table of Contents
Advertisement
Mounting to a wall or cabinet
1 Place the template at the desired mounting location, then mark the location of
the mounting points. The distance between the centerlines of the two mounting
points should be 4
2 Install drywall anchors (not included), if needed, at marked locations, then install
the screws into the same locations. Make sure you leave at least a
gap between the top of the screw head and wall.
3 Line the keyholes on the bottom of the switch with the drywall screws, and hook
the switch onto the drywall screws.
/
in. (104 mm).
3
32
Wall mount template
4
(104 mm)
/
in.
3
32
4
4
/
in. (3.5 mm)
9
64
Hide quick links:
Advertisement
Table of Contents
