Configuring Module Pre-Provisioning
The following example shows the list of pre-provisioned commands that were not applied when the module
came online.
switch(config-if-range)# show provision failed-config 101
The following config was not applied for slot 33
================================================
interface Ethernet101/1/1
service-policy input test
interface Ethernet101/1/2
service-policy input test
interface Ethernet101/1/3
service-policy input test
This example shows how to remove all pre-provisioned modules from a slot:
switch(config)# slot 2
switch(config-slot)# no provision model
switch(config-slot)#
Cisco Nexus 5000 Series NX-OS System Management Configuration Guide, Release 5.2(1)N1(1)
Configuration Examples for Pre-Provisioning
39