hit counter script
Download Print this page
Raymarine G-Series Installation Instructions Manual
Raymarine G-Series Installation Instructions Manual

Raymarine G-Series Installation Instructions Manual

Command center keyboard

Advertisement

Quick Links

G-Series Command Center Keyboard

Installation instructions

Product installation
This equipment must be installed and operated in
accordance with the Raymarine instructions
provided. Failure to do so could result in poor
product performance, personal injury, and/or
damage to your boat.
Service and Maintenance
This product contains no user serviceable
components. Please refer all maintenance and
repair to authorized Raymarine dealers.
Unauthorized repair may affect your warranty.
Ultra violet light
To provide protection against the damaging
effects of ultra violet (UV) light, the sun cover
should be placed on the unit when not in use.
Cleaning
DO NOT use acid, ammonia based or abrasive
products.
DO NOT use commercial high pressure washing
(jet wash) equipment.
Document number: 87084-1
Date: July 2007
Waste Electrical and Electronic Equipment Directive
The Waste Electrical and Electronic Equipment (WEEE) Directive requires
the recycling of waste electrical and electronic equipment. Whilst the WEEE
Directive does not apply to some of Raymarine's products, we support its
policy and ask you to be aware of how to dispose of this product.
The crossed out wheelie bin symbol, illustrated above, and found on our
products signifies that this product should not be disposed of in general
waste or landfill.
Please contact your local dealer, national distributor or Raymarine Technical
Services for information on product disposal.
Disclaimer
The technical and graphical information contained in this document, to the best of our
knowledge, was correct as it went to press. However, our policy of continuous improve-
ment and updating may change product specifications without prior notice. As a result,
unavoidable differences between the product and handbook may occur from time to
time. Raymarine cannot accept responsibility for any inaccuracies or omissions it may
contain. For the latest product information visit our website -
EMC installation guidelines
Raymarine equipment and accessories conform to the appropriate Electromagnetic
Compatibility (EMC) regulations. This minimizes electromagnetic interference between
equipment, which could otherwise affect the performance of your system.
Correct installation is required to ensure that EMC performance is not compromised.
For optimum EMC performance, we recommend that:
Raymarine equipment and the cables connected to it are:
i.
At least 3 ft. (1 m) from any equipment transmitting or cables carrying radio
signals e.g. VHF radios, cables and antennas. In the case of SSB radios, the
distance should be increased to 7 ft. (2 m).
ii.
More than 7 ft. (2 m) from the path of a radar beam. A radar beam can
normally be assumed to spread 20 degrees above and below the radiating
element.
Raymarine specified cables are used.
Cables are not cut or extended.
Always allow the maximum separation possible between different items of electrical
equipment. This will provide the best conditions for EMC performance for the
installation.
Technical specification
Approvals:
CE - conforms to
FCC- conforms to
Additional conformance
Size
Weight
Mounting
Supply voltage
Power consumption
Environmental conditions:
www.raymarine.com
Storage
conditions
packed:
LEN
Raymarine plc
Anchorage Park,
Portsmouth,
Hampshire PO3 5TD
United Kingdom
Tel: +44 (0) 23 9269 3611
Fax: +44 (0) 23 9269 4642
EN60945, EN300-440-2
CFR47 PART 15
IC-RSS-210
297 x 98 x 46
0.65 kg
Dash mount
Handheld (with optional wireless upgrade)
9 V to 16 V
1.5 W
operating temperature: -15°C to 55°C (5°F to 131°F)
non-operating temperature: -25°C to 70°C (-13°F to
158°F)
relative humidity limit: 95%
water protection:waterproof to CFR-46 standard
when
Temperature : -25°C to 55°C (-13°F to 158°F)
relatiive humidity: 75%
3
Raymarine Inc.
21 Manchester Street,
Merrimack,
New Hampshire 03054-4801
USA
Tel: +1 603.881.5200
Fax: +1 603.864.4576
www.raymarine.com

Advertisement

loading

Summary of Contents for Raymarine G-Series

  • Page 1: Installation Instructions

    Whilst the WEEE CE - conforms to EN60945, EN300-440-2 Directive does not apply to some of Raymarine’s products, we support its FCC- conforms to CFR47 PART 15 policy and ask you to be aware of how to dispose of this product.
  • Page 2 80017 Panel seal G-Series system Maximum quantity of Keyboards The Keyboard is installed as a part of the Raymarine G-Series The G-Series system will support up to 8 keyboards. marine electronics system. G-Series system documentation Refer to the additional documentation supplied with your G-series...
  • Page 3: Keyboard Connections

    When connecting a keyboard to the system, record its details on your system/schematic diagram. You will need this information dur- 3 m (9.8 ft) A06040 ing commissioning. (Refer to the separate G-Series system SeaTalk spur cable SeaTalk SeaTalk installation instructions for sample diagrams.)
  • Page 4: Mounting Arrangement

    Mounting arrangement Dimensions Mounting and environment • The keyboard is suitable for mounting both above and below G-Series keyboard decks. It is waterproof to CFR-46 standard. • Use the cutting template provided within this booklet. • Connect cable into keyboard before clamping in place.
  • Page 5 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Drill hole, 19/64 in (7.5 mm) diameter in 2 positions Command Centre Keyboard Template 11.1 in (281.6 mm) Drill hole, 15/16 in (23.6 mm) Remove material diameter in from shaded area only 2 positions Instrument edge Sun cover edge...

This manual is also suitable for:

E02044