Raymarine G-Series Installation Instructions Manual
Control keyboard wireless base station
Hide thumbs
Also See for G-Series:
- Installation instruction (180 pages) ,
- Installation & commissioning instructions (128 pages) ,
- Quick reference manual (37 pages)
Advertisement
87086_1.book Page 1 Thursday, October 4, 2007 8:47 AM
G-Series control keyboard
Wireless base station
Installation instructions
Product installation
This equipment must be installed and operated in
accordance with the Raymarine instructions
provided. Failure to do so could result in poor
product performance, personal injury, and/or
damage to your boat.
Service and maintenance
This product contains no user serviceable
components. Please refer all maintenance and
repair to authorized Raymarine dealers.
Unauthorized repair may affect your warranty.
Cleaning
DO NOT use acid, ammonia based or abrasive
products.
DO NOT use commercial high pressure washing
(jet wash) equipment.
Document number: 87086-1
Date: October 2007
Waste Electrical and Electronic Equipment Directive
The Waste Electrical and Electronic Equipment (WEEE) Directive requires
the recycling of waste electrical and electronic equipment. Whilst the WEEE
Directive does not apply to some of Raymarine's products, we support its
policy and ask you to be aware of how to dispose of this product.
The crossed out wheeled bin symbol, illustrated above, and found on our
products signifies that this product should not be disposed of in general
waste or landfill.
Please contact your local dealer, national distributor or Raymarine Technical
Services for information on product disposal.
Disclaimer
The technical and graphical information contained in this document, to the best of our
knowledge, was correct as it went to press. However, our policy of continuous improve-
ment and updating may change product specifications without prior notice. As a result,
unavoidable differences between the product and handbook may occur from time to
time. Raymarine cannot accept responsibility for any inaccuracies or omissions it may
contain. For the latest product information visit our website -
EMC installation guidelines
Raymarine equipment and accessories conform to the appropriate Electromagnetic
Compatibility (EMC) regulations. This minimizes electromagnetic interference between
equipment, which could otherwise affect the performance of your system.
Correct installation is required to ensure that EMC performance is not compromised.
FCC and Industry Canada Information
The G-Series control keyboard and wireless base station comply with US CFR47 part
15 Rules and with IC Standard RSS210. Operation is subject to the following two condi-
tions: (1) these devices may not cause harmful interference and (2) these devices must
accept interference received, including interference that may cause undesired
operation.
Changes or modifications to these devices not expressly approved in writing by Rayma-
rine could violate compliance with FCC or IC rules, and void the user's authority to
operate the equipment.
Declaration of Conformity
Raymarine UK Ltd. hereby declares that the G-Series Control Keyboard and Wireless
base station are in compliance with the essential requirements and other relevant provi-
sions of the R&TTE Directive 1999/5/EC.
The original Declarations of Conformity may be viewed on the relevant product pages at
www.raymarine.com.
1
www.raymarine.com
Advertisement
Table of Contents
Related Manuals for Raymarine G-Series
Summary of Contents for Raymarine G-Series
- Page 1 FCC and Industry Canada Information Unauthorized repair may affect your warranty. The G-Series control keyboard and wireless base station comply with US CFR47 part Cleaning 15 Rules and with IC Standard RSS210. Operation is subject to the following two condi-...
-
Page 2: Handbook Information
Page 65. Repeat base stations. These are not available for the wire- install and set up your wireless base station. less keyboard. It is part of a series of documents associated with the G-Series Installation sequence system. All documents can be downloaded from: www.raymarine.com/handbooks. - Page 3 87086_1.book Page 3 Thursday, October 4, 2007 8:47 AM Check pack items Plan wireless keyboard system Wireless base station Typical system layout The base station and wireless keyboard are installed as a part of the Raymarine G-Series system. SeaTalk backbone Monitor SeaTalk wireless basestation...
- Page 4 3. When connecting a keyboard to the system, record its details SeaTalk backbone on your system diagram. You will need this information during commissioning. (Refer to the separate G-Series system installation instructions for sample diagrams.) Wireless keyboard & base station cables 12 V dc,...
-
Page 5: Site Survey
87086_1.book Page 5 Thursday, October 4, 2007 8:47 AM Site survey Flybridge Bridge A site survey is required to select the appropriate location for your wireless base station. You must repeat the site survey for each keyboard / base station pair. Monitor Monitor Monitor... - Page 6 87086_1.book Page 6 Thursday, October 4, 2007 8:47 AM Check wireless coverage Register Keyboard to base station Register an unregistered keyboard to the required base station. You must survey the wireless coverage to ensure that each wireless keyboard can operate in the intended area. 1.
- Page 7 87086_1.book Page 7 Thursday, October 4, 2007 8:47 AM Mounting and connection Wireless base station connections Wireless base station mounting Wireless basestation White Blue r t i c Screen a l l SeaTalk Black connection D10208-1 Repeat base station There are no repeat base stations for the wireless keyboard. Keyboard and charge cable installation For information on the wireless keyboard and charge cables, refer to the separate instructions supplied with the wireless upgrade kit.
- Page 8 75% Base station to keyboard Typically 9 m (30 ft) range Approvals: Europe: R&TTE 1999/5/EC USA: CFR47 Part 15 Canada: RSS-210 Raymarine plc Raymarine Inc. Anchorage Park, 21 Manchester Street, Portsmouth, Merrimack, Hampshire PO3 5TD New Hampshire 03054-4801...