Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG FSE83806P
Summary of Contents for AEG FSE83806P
- Page 1 FSE83806P User Manual Dishwasher USER MANUAL...
- Page 2 Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the AEG manufacturer’s warranty provided with your product. Products must be used, installed and operated in accordance with this manual.
-
Page 3: Table Of Contents
15. WARRANTY ......................24 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 4 ENGLISH damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 5: Safety Instructions
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not leave the appliance with the door open, to • avoid a tripping hazard. Before any maintenance operation, deactivate the •... - Page 6 ENGLISH installation. Make sure that there is instructions on the detergent access to the mains plug after the packaging. installation. • Do not drink and play with the water • Do not pull the mains cable to in the appliance. disconnect the appliance.
-
Page 7: Product Description
3. PRODUCT DESCRIPTION Top spray arm Detergent dispenser Upper spray arm Comfort Lift basket Lower spray arm Release handle Filters Lower basket handle Rating plate Upper basket Air vent Cutlery drawer Rinse aid dispenser 3.1 TimeBeam TimeBeam displays the following... -
Page 8: Control Panel
ENGLISH When AirDry is activated during the drying phase, the projection on the floor may not be completely visible. To check the remaining time of the running programme, look at the control panel display. 4. CONTROL PANEL TimeSaver touch button On/off button Display XtraDry touch button... - Page 9 Programme Degree of soil Programme phases Options Type of load • All • Prewash • ExtraHygiene • Crockery, cut- • Wash from 45 °C to 70 • XtraDry lery, pots and °C pans • Rinses • Dry • Mixed soil •...
-
Page 10: Settings
ENGLISH 5.1 Consumption values Water Energy Duration Programme (kWh) (min) 12.5 0.78 7.0 - 14.0 0.9 - 1.6 90 - 160 14 - 16 1.2 - 1.5 160 - 180 12.5 - 14.5 1.4 - 1.7 170 - 190 12 - 14 0.7 - 0.9 82 - 92 10.5... - Page 11 How to set the programme • The display shows the current setting. selection mode – = the rinse aid empty The appliance is in programme selection notification is deactivated. mode when the display shows the – = the rinse aid empty programme number P1.
- Page 12 ENGLISH How to activate the acoustic signal for the end of programme Make sure the appliance is in user mode. 1. Press • The indicators are off. • The indicator still flashes. • The display shows the current setting. – = the acoustic signal is During the drying phase, the deactivated.
-
Page 13: Options
3. Press on/off to confirm the setting. 7. OPTIONS How to activate XtraDry Desired options must be activated every time before Press you start a programme. The related indicator is on. It is not possible to activate The display shows the updated or deactivate options while a programme duration. -
Page 14: Daily Use
ENGLISH detergent and do not load the CAUTION! baskets. Only use rinse aid designed 8.1 How to fill the rinse aid specifically for dishwashers. dispenser 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. - Page 15 The basket is automatically locked on the 2. Put the detergent, in powder or upper level. tablets, in the compartment (B). 2. Carefully place items in the basket or 3. If the programme has a prewash remove them (refer to Basket phase, put a small quantity of loading leaflet).
-
Page 16: Hints And Tips
ENGLISH not to change the selection of the Press and hold RESET until the appliance programme and options. is in programme selection mode. When the countdown is completed, the Cancelling the programme programme starts. Press and hold RESET until the appliance Opening the door while the is in programme selection mode. -
Page 17: Care And Cleaning
10.3 Loading the baskets • The filters are clean and correctly installed. • Use the appliance to wash • The spray arms are not clogged. dishwasher-safe items only. • There is dishwasher rinse aid (unless • Do not wash in the appliance items you use multi- tablets). - Page 18 ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
-
Page 19: Troubleshooting
11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. - Page 20 ENGLISH With some problems, the display WARNING! shows an alarm code. Repairs not properly done The majority of problems that can may result in serious risk to occur can be solved without the need the safety of the user. Any to contact an Authorised Service repairs must be performed Centre.
- Page 21 Problem and alarm code Possible solution The appliance door is diffi- • The appliance is not levelled. Loosen or tighten the ad- cult to close. justable feet (if applicable). • Parts of the tableware are protruding from the baskets.
-
Page 22: Technical Information
ENGLISH Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature. •... -
Page 23: Installation
Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 / 60 Wattage (W) 1550-2200 Water supply pressure bar (minimum and maximum) 0.5 - 8 kPa (minimum and maximum) 50 - 800 Water supply max 60 °C Cold water or hot water... - Page 24 ENGLISH For best washing performance it is recommended to connect the appliance to a cold water supply. Energy savings can be made by connecting the appliance to a Solar water system and using economy options, however the water temperature must not exceed 60° C. 2.
- Page 25 14.4 Water drain hose non-return valve, this valve can cause the appliance to drain incorrectly. remove The highest point of the drain hose must the non-return valve. be no more than 600 mm from the floor If you connect the water drain hose to a...
-
Page 26: Warranty
(c) cosmetic damage which does not affect the operation of the Appliance; This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof (d) damage to the Appliance caused by: of purchase documents in a safe place for future reference should there be a (i) negligence or accident;... - Page 27 ENGLISH 16. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it. Help protect the contact your municipal office. environment and human health by recycling waste of electrical and electronic appliances.
- Page 28 www.aeg.com/au...