Lightweight Vacuum Cleaner Household Type Owner’s Guide Model Z160A IMPORTANT For any advice on your cleaner, please telephone Customer Care 08706 055055 Index Important Safeguards ..... 2 Service Information ....4 Identify Parts ......5 Assemble ........ 5 Use .......... 6 Dust Cup .........
IMPORTANT SAFEGUARDS When using an electric appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire, electric shock, or injury: ● ● ● ● ● Do not use outdoors or on wet surfaces. ●...
Page 3
2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet). 3. If there is any sign of damage to the supply cable it MUST be renewed. The repair MUST be carried out by Electrolux Service Staff or a similar qualified person.
Important - in the event of the mains supply cable of this vacuum cleaner requiring replacement, we recommend that this be carried out by a Electrolux Service Agent. Spares New filters can be obtained from Authorised Electrolux Dealers and electrical retailers.
Identify Parts Power Cord Telescoping Handle Telescoping Handle Release On/Off Switch Motor Unit Dust Cup Latch Crevice Tool (To use crevice tool, replace Dust Cup nozzle with crevice tool) Nozzle Dust Cup Filter (inside dust cup) HOW TO USE Telescopic Handle Press down on telescoping handle release, then pull the handle out to its maximum length and release the latch so that the handle locks firmly into place.
Page 6
HOW TO USE Use this lightweight vacuum cleaner for quick and easy cleaning. Move the nozzle over any floor covering to quickly clean dirt, lint or threads. Power Switch Power Switch 1. Push switch forward to turn on. 2. Pull switch back to turn off. As a Stick Vac Handle 1.
Page 7
6. Replace dust cup filter in dust cup. Fit dust cup and motor unit back together and push firmly until latch clicks into place. Replace a dirty or torn filter. To order additional dust cup filters call Electrolux on 08706 055055.
Cleaner Care NOTE: Turn off power switch and disconnect electrical cord to clean unit. To keep the vacuum cleaner looking new, it can be wiped with a damp cloth and a mild soap solution, then thoroughly dried. Never use any type of chemical as chemicals can damage the cleaner.
The guarantee may be invalidated by unauthorised repair or modification of the appliance. d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.